Catalytic Reduction of NOx with Hydrocarbons Under Lean Diesel Exhaust Gas Conditions PDF Download

Author: B. H. Engler
Publisher:
ISBN:
Category : Catalysts
Languages : en
Pages : 30

View

Book Description

Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

View

Book Description
As the nation's demand for energy grows along with concern for the environment, there is a pressing need for cleaner, more efficient forms of energy. The internal combustion engine is well established as one of the most reliable forms of power production. They are commercially available in power ranges from 0.5 kW to 6.5 MW, which make them suitable for a wide range of distributed power applications from small scale residential to large scale industrial. In addition, alternative fuels with domestic abundance, such as natural gas, can play a key role in weaning our nations dependence on foreign oil. Lean burn natural gas engines can achieve high efficiencies and can be conveniently placed anywhere natural gas supplies are available. However, the aftertreatment of Nox emissions presents a challenge in lean exhaust conditions. Unlike carbon monoxide and hydrocarbons, which can be catalytically reduced in lean exhaust, NOx emissions require a net reducing atmosphere for catalytic reduction. Unless this challenge of NOx reduction can be met, emissions regulations may restrict the implementation of highly efficient lean burn natural gas engines for stationary power applications. While the typical three-way catalyst is ineffective for NOx reduction under lean exhaust conditions, several emerging catalyst technologies have demonstrated potential. The three leading contenders for lean burn engine de-NOx are the Lean NOx Catalyst (LNC), Selective Catalytic Reduction (SCR) and the Lean Nox Trap (LNT). Similar to the principles of SCR, an LNT catalyst has the ability to store NOx under lean engine operation. Then, an intermittent rich condition is created causing the stored NOx to be released and subsequently reduced. However, unlike SCR, which uses urea injection to create the reducing atmosphere, the LNT can use the same fuel supplied to the engine as the reductant. LNT technology has demonstrated high reduction efficiencies in diesel applications where diesel fuel is the reducing agent. The premise of this research is to explore the application of Lean NOx Trap technology to a lean burn natural gas engine where natural gas is the reducing agent. Natural gas is primarily composed of methane, a highly stable hydrocarbon. The two primary challenges addressed by this research are the performance of the LNT in the temperature ranges experienced from lean natural gas combustion and the utilization of the highly stable methane as the reducing agent. The project used an 8.3 liter lean burn natural gas engine on a dynamometer to generate the lean exhaust conditions. The catalysts were packaged in a dual path aftertreatment system, and a set of valves were used to control the flow of exhaust to either leg during adsorption and regeneration.

Author: Germaine Seijger
Publisher: IOS Press
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 248

View

Book Description
Contents of this Doctoral Dissertation include: NOx emission reduction from lean burn engines, automotive exhaust gas emissions, Reactions of NOx in the atmosphere Engine market share and sales trends, Ferrierite characteristics, synthesis and application, Characteristics of the group of FER framework structures, Screening of silver and cerium exchanged zeolite catalysts for the lean burn reduction of NOx with propene, Hydrocarbon NOx reduction in lean burn exhaust gas over Ce-FER catalysts, Approach to the kinetics of NOx reduction with propene over Ce-H-Ferrierite, In SITU preparation of ferrierite coatings on cordierite honeycomb supports, Concluding remarks

Author: Oliver Kröcher
Publisher:
ISBN: 9783038973652
Category :
Languages : en
Pages :

View

Book Description
The most efficient process to reduce NOx emissions from lean exhaust gases, selective catalytic reduction (SCR) with ammonia, has undergone tremendous development over the past decades. Originally only applied in stationary power plants and industrial installations, SCR systems are now installed in millions of mobile diesel engines, ranging from off-road machineries, to heavy-duty and light-duty trucks and passenger cars, to locomotives and ships. All of these applications involve specific challenges due to tighter emission limits, new internal combustion engine technologies, or alternative fuels. Three review articles and 14 research articles in this book describe recent results and research trends of various aspects of the SCR process. Reaction engineering aspects, such as the proper dosage of ammonia or urea, respectively, are as important as further developments of the different SCR catalysts, by deepening the understanding of their functionality or by systematic improvements of their properties, such as low-temperature activity, selectivity, or poisoning-resistance. Another covered aspect is cost reduction through the use of cheaper base materials for the production is active and stable SCR catalysts. Finally, research efforts are reported to develop SCR processes with different reducing agents, which would open doors to new applications in the future. The range of topics addressed in this book will stimulate the reader's interest as well as provide a valuable source of information for researchers in academia and industry.

Author: Umit S. Ozkan
Publisher:
ISBN:
Category :
Languages : en
Pages :

View

Book Description
A two-stage system for the catalytic reduction of NO from lean-burn natural gas reciprocating engine exhaust is investigated. Each of the two stages uses a distinct catalyst. The first stage is oxidation of NO to NO{sub 2} and the second stage is reduction of NO{sub 2} to N{sub 2} with a hydrocarbon. The central idea is that since NO{sub 2} is a more easily reduced species than NO, it should be better able to compete with oxygen for the combustion reaction of hydrocarbon, which is a challenge in lean conditions. Early work focused on demonstrating that the N{sub 2} yield obtained when NO{sub 2} was reduced was greater than when NO was reduced. NO{sub 2} reduction catalysts were designed and silver supported on alumina (Ag/Al{sub 2}O{sub 3}) was found to be quite active, able to achieve 95% N{sub 2} yield in 10% O{sub 2} using propane as the reducing agent. The design of a catalyst for NO oxidation was also investigated, and a Co/TiO{sub 2} catalyst prepared by sol-gel was shown to have high activity for the reaction, able to reach equilibrium conversion of 80% at 300 C at GHSV of 50,000h{sup -1}. After it was shown that NO{sub 2} could be more easily reduced to N{sub 2} than NO, the focus shifted on developing a catalyst that could use methane as the reducing agent. The Ag/Al{sub 2}O{sub 3} catalyst was tested and found to be inactive for NOx reduction with methane. Through iterative catalyst design, a palladium-based catalyst on a sulfated-zirconia support (Pd/SZ) was synthesized and shown to be able to selectively reduce NO{sub 2} in lean conditions using methane. Development of catalysts for the oxidation reaction also continued and higher activity, as well as stability in 10% water, was observed on a Co/ZrO{sub 2} catalyst, which reached equilibrium conversion of 94% at 250 C at the same GHSV. The Co/ZrO{sub 2} catalyst was also found to be extremely active for oxidation of CO, ethane, and propane, which could potential eliminate the need for any separate oxidation catalyst. At every stage, catalyst synthesis was guided by the insights gained through detailed characterization of the catalysts using many surface and bulk analysis techniques such as X-ray diffraction, X-ray photoelectron spectroscopy, Temperature-programmed Reduction, Temperature programmed Desorption, and Diffuse Reflectance InfraRed Fourier Transform Spectroscopy as well as steady state reaction experiments. Once active catalysts for each stage had been developed, a physical mixture of the two catalysts was tested for the reduction of NO with methane in lean conditions. These experiments using a mixture of the catalysts produced N2 yields as high as 90%. In the presence of 10% water, the catalyst mixture produced 75% N{sub 2} yield, without any optimization. The dual catalyst system developed has the potential to be implemented in lean-burn natural gas engines for reducing NOx in lean exhaust as well as eliminating CO and unburned hydrocarbons without any fuel penalty or any system modifications. If funding continues, future work will focus on improving the hydrothermal stability of the system to bring the technology closer to application.

Author: Society of Automotive Engineers
Publisher: SAE International
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 108

View

Book Description

Author: Isabella Nova
Publisher: Springer Science & Business Media
ISBN: 1489980717
Category : Science
Languages : en
Pages : 715

View

Book Description
Urea-SCR Technology for deNOx After Treatment of Diesel Exhausts presents a complete overview of the selective catalytic reduction of NOx by ammonia/urea. The book starts with an illustration of the technology in the framework of the current context (legislation, market, system configurations), covers the fundamental aspects of the SCR process (catalysts, chemistry, mechanism, kinetics) and analyzes its application to useful topics such as modeling of full scale monolith catalysts, control aspects, ammonia injections systems and integration with other devices for combined removal of pollutants.

Author: John V. Cavataio
Publisher:
ISBN:
Category :
Languages : en
Pages : 518

View

Book Description

Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

View

Book Description
Catalysts, systems and methods are described to reduce NO.sub.x emissions of an internal combustion engine. In one embodiment, an emissions treatment system for an exhaust stream is provided having an SCR catalyst comprising silver tungstate on an alumina support. The emissions treatment system may be used for the treatment of exhaust streams from diesel engines and lean burn gasoline engines. An emissions treatment system may further comprise an injection device operative to dispense a hydrocarbon reducing agent upstream of the catalyst.

Author: John H Johnson
Publisher: SAE International
ISBN: 1468600117
Category : Technology & Engineering
Languages : en
Pages : 636

View

Book Description
The need for manufacturers to meet U.S. Environmental Protection Agency (EPA) mobile source diesel emissions standards for on-highway light duty and heavy duty vehicles has been the driving force for the control of diesel particulate and NOx emissions reductions. Diesel Particulate Emissions: Landmark Research 1994-2001 contains the latest research and development findings that will help guide engineers to achieve low particulate emissions from future engines. Based on extensive SAE literature from the past seven years, the 45 papers in this book have been selected from the SAE Transactions Journals.