Carbon Dioxide Sequestration in Cementitious Construction Materials PDF Download

Author: F. Pacheco-Torgal
Publisher: Elsevier
ISBN: 0443135789
Category : Technology & Engineering
Languages : en
Pages : 428

View

Book Description
Carbon Dioxide Sequestration in Cementitious Construction Materials – Second Edition follows on the success of the previous edition and provides an up-to-date review on recent research developments on cementitious construction materials based on carbon dioxide storage. Along with the addition of an entire new section on bio- sequestration. Brand new chapters are included on carbonation methods such as carbon sequestration of cement pastes during pressurized CO2 curing; carbon dioxide sequestration of low-calcium fly ash via direct aqueous carbonation; increasing the efficiency of carbon dioxide sequestration through high temperature carbonation; and carbon sequestration in engineered cementitious composites. There are also several new case studies on sequestration of industrial wastes, which include carbon dioxide sequestration by direct mineralization of fly ash; the effect of direct carbonation routes of basic oxygen furnace slag on strength and hydration of blended cement paste; carbon sequestration of mine waste and utilization as a supplementary cementitious material and carbon dioxide sequestration on masonry blocks based on industrial wastes. This updated edition will be a valuable reference resource for academic researchers, materials scientists and civil engineers, and other construction professionals looking for viable routes for carbon sequestration in building materials. Promotes the importance of CO2? storage in carbonation of construction materials, especially reincorporation of CO2? during fabrication Discusses a wide range of cementitious materials with CO2? storage capabilities Features redesign of cementation mechanisms to utilize CO2? during fabrication Covers biosequestration

Author: M. Mercedes Maroto-Valer
Publisher: Elsevier
ISBN: 1845699580
Category : Technology & Engineering
Languages : en
Pages : 540

View

Book Description
Carbon dioxide (CO2) capture and storage (CCS) is the one advanced technology that conventional power generation cannot do without. CCS technology reduces the carbon footprint of power plants by capturing, and storing the CO2 emissions from burning fossil-fuels and biomass. This volume provides a comprehensive reference on the state of the art research, development and demonstration of carbon storage and utilisation, covering all the storage options and their environmental impacts. It critically reviews geological, terrestrial and ocean sequestration, including enhanced oil and gas recovery, as well as other advanced concepts such as industrial utilisation, mineral carbonation, biofixation and photocatalytic reduction. Foreword written by Lord Oxburgh, Climate Science Peer Comprehensively examines the different methods of storage of carbon dioxide (CO2) and the various concepts for utilisation Reviews geological sequestration of CO2, including coverage of reservoir sealing and monitoring and modelling techniques used to verify geological sequestration of CO2

Author: National Academies of Sciences, Engineering, and Medicine
Publisher: National Academies Press
ISBN: 0309484529
Category : Science
Languages : en
Pages : 511

View

Book Description
To achieve goals for climate and economic growth, "negative emissions technologies" (NETs) that remove and sequester carbon dioxide from the air will need to play a significant role in mitigating climate change. Unlike carbon capture and storage technologies that remove carbon dioxide emissions directly from large point sources such as coal power plants, NETs remove carbon dioxide directly from the atmosphere or enhance natural carbon sinks. Storing the carbon dioxide from NETs has the same impact on the atmosphere and climate as simultaneously preventing an equal amount of carbon dioxide from being emitted. Recent analyses found that deploying NETs may be less expensive and less disruptive than reducing some emissions, such as a substantial portion of agricultural and land-use emissions and some transportation emissions. In 2015, the National Academies published Climate Intervention: Carbon Dioxide Removal and Reliable Sequestration, which described and initially assessed NETs and sequestration technologies. This report acknowledged the relative paucity of research on NETs and recommended development of a research agenda that covers all aspects of NETs from fundamental science to full-scale deployment. To address this need, Negative Emissions Technologies and Reliable Sequestration: A Research Agenda assesses the benefits, risks, and "sustainable scale potential" for NETs and sequestration. This report also defines the essential components of a research and development program, including its estimated costs and potential impact.

Author: National Academies of Sciences, Engineering, and Medicine
Publisher: National Academies Press
ISBN: 0309483360
Category : Science
Languages : en
Pages : 257

View

Book Description
In the quest to mitigate the buildup of greenhouse gases in Earth's atmosphere, researchers and policymakers have increasingly turned their attention to techniques for capturing greenhouse gases such as carbon dioxide and methane, either from the locations where they are emitted or directly from the atmosphere. Once captured, these gases can be stored or put to use. While both carbon storage and carbon utilization have costs, utilization offers the opportunity to recover some of the cost and even generate economic value. While current carbon utilization projects operate at a relatively small scale, some estimates suggest the market for waste carbon-derived products could grow to hundreds of billions of dollars within a few decades, utilizing several thousand teragrams of waste carbon gases per year. Gaseous Carbon Waste Streams Utilization: Status and Research Needs assesses research and development needs relevant to understanding and improving the commercial viability of waste carbon utilization technologies and defines a research agenda to address key challenges. The report is intended to help inform decision making surrounding the development and deployment of waste carbon utilization technologies under a variety of circumstances, whether motivated by a goal to improve processes for making carbon-based products, to generate revenue, or to achieve environmental goals.

Author: Sharifah Salwa Mohd Zuki
Publisher: Springer Nature
ISBN: 981162187X
Category : Building
Languages : en
Pages : 273

View

Book Description
This book gathers a selection of peer-reviewed papers presented at the Sustainable Concrete Materials and Structures in Construction 2020, held at Universiti Tun Hussein Onn Malaysia, Malaysia, on 24th August 2020. The contributions, prepared by international scientists and engineers, cover the latest advances in and innovative applications with the theme Towards Sustainable Green Concrete The articles in this book cater to academics, graduate students, researchers, as well as industrial practitioners working in the areas of concrete materials and building construction.

Author: Wei Cheng
Publisher:
ISBN:
Category :
Languages : en
Pages : 186

View

Book Description
Concern for the environmental impact of increased carbon dioxide in the atmosphere has focused attention on reducing emissions of both natural and industrial carbon dioxide. This thesis explores a method for inhibiting or preventing the oxidation of carbon in plant material by encapsulating biomass in a mortar composed of portland cement, natural sand, and water. The particular biomass in question is bio-char, a pulverized charcoal produced from the pyrolysis of timber cut down due to insect infestation. While some carbon was oxidized during pyrolysis, unless encapsulated to prevent contact with oxygen, the balance of the carbon would eventually form carbon dioxide. Sequestering carbon in a portland cement binder likewise offsets carbon footprint associated with cement production (an essential ingredient in concrete) However, bio-char is a non-traditional ingredient in mortar and concrete with a heretofore unknown impact on the material performance in both the fresh and hardened states. To evaluate the impact of bio-char on fresh and hardened cementitious materials, the bio char was first characterized for particle size distribution, density, and absorption. Mortars were prepared with portland cement, natural sand, and water, with varying percentages of replacement of sand with biochar. Workability was measured via the mortar flow test, air content estimated by the Chace Air Indicator, and hardened mortar evaluated at 1 to 56 days via density, compression strength, and splitting tensile strength. For all mixtures water content was adjusted to maintain a fixed mortar flow. This thesis concentrates on the demonstration and investigation of the impact on mechanical performance including compressive and splitting tensile strength of bio-char mortar when workability of mortar mixture is controlled. The environmental benefit is estimated by means of the author's "carbon sequestration potential", and the trade-off between mechanical performance and environmental benefit demonstrated. Various models are proposed to support hypotheses for the influence of bio-char on mortar behavior. This work has shown that with the workability controlled, compressive and splitting tensile strength decreased exponentially as bio-char content increases. Carbon sequestration potential increases, however with bio-char content, such that production of cementitious materials for various applications is potentially viable for carbon neutral to carbon negative.

Author: Michele Aresta
Publisher: Springer
ISBN: 3030158683
Category : Science
Languages : en
Pages : 450

View

Book Description
This book is devoted to CO2 capture and utilization (CCU) from a green, biotechnological and economic perspective, and presents the potential of, and the bottlenecks and breakthroughs in converting a stable molecule such as CO2 into specialty chemicals and materials or energy-rich compounds. The use of renewable energy (solar, wind, geothermal, hydro) and non-fossil hydrogen is a must for converting large volumes of CO2 into energy products, and as such, the authors explore and compare the availability of hydrogen from water using these sources with that using oil or methane. Divided into 13 chapters, the book offers an analysis of the conditions under which CO2 utilization is possible, and discusses CO2 capture from concentrated sources and the atmosphere. It also analyzes the technological (non-chemical) uses of CO2, carbonation of basic minerals and industrial sludge, and the microbial-catalytic-electrochemical-photoelectrochemical-plasma conversion of CO2 into chemicals and energy products. Further, the book provides examples of advanced bioelectrochemical syntheses and RuBisCO engineering, as well as a techno-energetic and economic analysis of CCU. Written by leading international experts, this book offers a unique perspective on the potential of the various technologies discussed, and a vision for a sustainable future. Intended for graduates with a good understanding of chemistry, catalysis, biotechnology, electrochemistry and photochemistry, it particularly appeals to researchers (in academia and industry) and university teachers.

Author: Herbert Pöllmann
Publisher: Walter de Gruyter GmbH & Co KG
ISBN: 3110473720
Category : Science
Languages : en
Pages : 518

View

Book Description
Aside from water the materials which are used by mankind in highest quantities arecementitious materials and concrete. This book shows how the quality of the technical product depends on mineral phases and their reactions during the hydration and strengthening process. Additives and admixtures infl uence the course of hydration and the properties. Options of reducing the CO2-production in cementitious materials are presented and numerous examples of unhydrous and hydrous phases and their formation conditions are discussed. This editorial work consists of four parts including cement composition and hydration, Special cement and binder mineral phases, Cementitious and binder materials, and Measurement and properties. Every part contains different contributions and covers a broad range within the area. Contents Part I: Cement composition and hydration Diffraction and crystallography applied to anhydrous cements Diffraction and crystallography applied to hydrating cements Synthesis of highly reactive pure cement phases Thermodynamic modelling of cement hydration: Portland cements – blended cements – calcium sulfoaluminate cements Part II: Special cement and binder mineral phases Role of hydrotalcite-type layered double hydroxides in delayed pozzolanic reactions and their bearing on mortar dating Setting control of CAC by substituted acetic acids and crystal structures of their calcium salts Crystallography and crystal chemistry of AFm phases related to cement chemistry Part III: Cementitious and binder materials Chemistry, design and application of hybrid alkali activated binders Binding materials based on calcium sulphates Magnesia building material (Sorel cement) – from basics to application New CO2-reduced cementitious systems Composition and properties of ternary binders Part IV: Measurement and properties Characterization of microstructural properties of Portland cements by analytical scanning electron microscopy Correlating XRD data with technological properties No cement production without refractories

Author: Pen-Chi Chiang
Publisher: Springer
ISBN: 9811032688
Category : Science
Languages : en
Pages : 456

View

Book Description
This book focuses on an important technology for mineralizing and utilizing CO2 instead of releasing it into the atmosphere. CO2 mineralization and utilization demonstrated in the waste-to-resource supply chain can “reduce carbon dependency, promote resource and energy efficiency, and lessen environmental quality degradation,” thereby reducing environmental risks and increasing economic benefits towards Sustainable Development Goals (SDG). In this book, comprehensive information on CO2 mineralization and utilization via accelerated carbonation technology from theoretical and practical considerations was presented in 20 Chapters. It first introduces the concept of the carbon cycle from the thermodynamic point of view and then discusses principles and applications regarding environmental impact assessment of carbon capture, storage and utilization technologies. After that, it describes the theoretical and practical considerations for “Accelerated Carbonation (Mineralization)” including analytical methods, and systematically presents the carbonation mechanism and modeling (process chemistry, reaction kinetics and mass transfer) and system analysis (design and analysis of experiments, life cycle assessment and cost benefit analysis). It then provides physico-chemical properties of different types of feedstock for CO2 mineralization and then explores the valorization of carbonated products as green materials. Lastly, an integral approach for waste treatment and resource recovery is introduced, and the carbonation system is critically assessed and optimized based on engineering, environmental, and economic (3E) analysis. The book is a valuable resource for readers who take scientific and practical interests in the current and future Accelerated Carbonation Technology for CO2 Mineralization and Utilization.

Author: Björn Lagerblad
Publisher:
ISBN: 9789197607001
Category : Atmospheric carbon dioxide
Languages : en
Pages : 47

View

Book Description
Carbonation results when carbonate ions from dissolved carbon dioxide react with the Ca ions of the cement paste and precipitate calcium carbonate. By time all Ca-bearing cement hydrates will decompose and form calcite. The end product will apart from calcite be silica gels, metal hydroxides and clays. Carbon dioxide and water can be found in almost every environment and thus all concretes will be subjected to carbonation. The cement paste will in the course of time go back to the basic components in cement production. Therefore, the question is not if concrete and other cementitious products will carbonate, but how fast they will carbonate. In geological terns the cement paste turns into marly limestone and the concrete into marly agglomerate. Old Roman concrete structures are basically such a rock. Carbonation is a process from the surface, i.e. the amount of carbonated material is related to exposure time and surface. Surfaces in direct contact with carbon dioxide and water will carbonate rapidly but a shell of already carbonated concrete will slow down the carbonation of the interior. Thus to be able to calculate the CO2-uptake we must know the transport mechanism of carbon dioxide and carbonate ions through the already altered product. The process of passing a shell of already carbonated concrete is complex. The speed of carbonation is apart from the amount of CO2 in the environment also governed by the size and geometry of the porosity, the degree of water saturation, the type of cement/binder, the temperature, etc. Even concrete submerged in water or buried in soil will carbonate but at a slow speed due to biological degradation and the slowness of exchange reactions between water and the gases in the atmosphere. To be able to calculate CO2 uptake one must consider the microclimate at individual concrete surfaces, concrete qualities and cement/binder types in a time frame. Thus approximations are needed. In the general case assuming a similar environment and concrete quality the carbonation rate slows down with the square root of time. By choosing the most common types of concrete structures, estimating the exposed surfaces in different environments and concrete qualities it is possible to get a good estimate of the rate of carbon dioxide uptake. As a consequence of the rapidly decreasing rate of carbonation one can assume that most of the carbonation of concrete structures takes place during the first 50 years and after demolition as this will increase the surfaces dramatically. One must, however, also consider that the types of cement and quality of the concrete have changed and will change over time. Thus there will be a difference between how much is taken up today and how much that will be taken up in 50 years from now. Concrete is a fairly modern material and most concrete structures still remain but we can expect the amount of demolished concrete to increase in the future. A guess is that a 100-year perspective most concrete structures that exist today will probably be demolished and most of the carbonate rock calcinated during cement production will be back as a carbonate rock. To be able to calculate the carbonation rate some simplifications are needed. In this report concrete strength is used as a substitute for porosity and from literature data constants for different environmental classes are selected. The influence of different cements and additions is handled by correction factors.