Author: National Aeronautics and Space Adm Nasa
Publisher: Independently Published
ISBN: 9781729303962
Category : Science
Languages : en
Pages : 54
Book Description
This report summarizes the findings on the NASA contract NAG8-212, Task No. 3. The overall project consists of three tasks, all of which have been successfully completed. In addition, some supporting supplemental work, not required by the contract, has been performed and is documented herein. Task 1 involved the modification of the wall functions in the code FDNS (Finite Difference Navier-Stokes) to use a Reynolds Analogy-based method. This task was completed in August, 1992. Task 2 involved the verification of the code against experimentally available data. The data chosen for comparison was from an experiment involving the injection of helium from a wall jet. Results obtained in completing this task also show the sensitivity of the FDNS code to unknown conditions at the injection slot. This task was completed in September, 1992. Task 3 required the computation of the flow of hot exhaust gases through the P&W 40K subscale nozzle. Computations were performed both with and without film coolant injection. This task was completed in July, 1993. The FDNS program tends to overpredict heat fluxes, but, with suitable modeling of backside cooling, may give reasonable wall temperature predictions. For film cooling in the P&W 40K calorimeter subscale nozzle, the average wall temperature is reduced from 1750R to about 1050R by the film cooling. The average wall heat flux is reduced by a factor of 3. Woodbury, Keith A. Unspecified Center...
Analysis of Film Cooling in Rocket Nozzles
Author: National Aeronautics and Space Adm Nasa
Publisher: Independently Published
ISBN: 9781729303962
Category : Science
Languages : en
Pages : 54
Book Description
This report summarizes the findings on the NASA contract NAG8-212, Task No. 3. The overall project consists of three tasks, all of which have been successfully completed. In addition, some supporting supplemental work, not required by the contract, has been performed and is documented herein. Task 1 involved the modification of the wall functions in the code FDNS (Finite Difference Navier-Stokes) to use a Reynolds Analogy-based method. This task was completed in August, 1992. Task 2 involved the verification of the code against experimentally available data. The data chosen for comparison was from an experiment involving the injection of helium from a wall jet. Results obtained in completing this task also show the sensitivity of the FDNS code to unknown conditions at the injection slot. This task was completed in September, 1992. Task 3 required the computation of the flow of hot exhaust gases through the P&W 40K subscale nozzle. Computations were performed both with and without film coolant injection. This task was completed in July, 1993. The FDNS program tends to overpredict heat fluxes, but, with suitable modeling of backside cooling, may give reasonable wall temperature predictions. For film cooling in the P&W 40K calorimeter subscale nozzle, the average wall temperature is reduced from 1750R to about 1050R by the film cooling. The average wall heat flux is reduced by a factor of 3. Woodbury, Keith A. Unspecified Center...
Publisher: Independently Published
ISBN: 9781729303962
Category : Science
Languages : en
Pages : 54
Book Description
This report summarizes the findings on the NASA contract NAG8-212, Task No. 3. The overall project consists of three tasks, all of which have been successfully completed. In addition, some supporting supplemental work, not required by the contract, has been performed and is documented herein. Task 1 involved the modification of the wall functions in the code FDNS (Finite Difference Navier-Stokes) to use a Reynolds Analogy-based method. This task was completed in August, 1992. Task 2 involved the verification of the code against experimentally available data. The data chosen for comparison was from an experiment involving the injection of helium from a wall jet. Results obtained in completing this task also show the sensitivity of the FDNS code to unknown conditions at the injection slot. This task was completed in September, 1992. Task 3 required the computation of the flow of hot exhaust gases through the P&W 40K subscale nozzle. Computations were performed both with and without film coolant injection. This task was completed in July, 1993. The FDNS program tends to overpredict heat fluxes, but, with suitable modeling of backside cooling, may give reasonable wall temperature predictions. For film cooling in the P&W 40K calorimeter subscale nozzle, the average wall temperature is reduced from 1750R to about 1050R by the film cooling. The average wall heat flux is reduced by a factor of 3. Woodbury, Keith A. Unspecified Center...
Modern Engineering for Design of Liquid-Propellant Rocket Engines
Author: Dieter K. Huzel
Publisher: AIAA
ISBN: 9781600864001
Category : Liquid propellant rocket engines
Languages : en
Pages : 452
Book Description
Publisher: AIAA
ISBN: 9781600864001
Category : Liquid propellant rocket engines
Languages : en
Pages : 452
Book Description
A Design Study of a Regeneratively Cooled Nozzle for a Tungsten Water-moderated Nuclear Rocket System
Author: Richard L. Puthoff
Publisher:
ISBN:
Category : Liquid propellants
Languages : en
Pages : 44
Book Description
Publisher:
ISBN:
Category : Liquid propellants
Languages : en
Pages : 44
Book Description
Scientific and Technical Aerospace Reports
STAR
Scientific and Technical Aerospace Reports
Analysis, Feasibility, and Wall-temperature Distribution of a Radiation-cooled Nuclear-rocket Nozzle
Author: William H. Robbins
Publisher:
ISBN:
Category : Fluid mechanics
Languages : en
Pages : 36
Book Description
Publisher:
ISBN:
Category : Fluid mechanics
Languages : en
Pages : 36
Book Description
Technical Abstract Bulletin
NASA Technical Note
Fundamentals of Rocket Propulsion
Author: DP Mishra
Publisher: CRC Press
ISBN: 1351708414
Category : Technology & Engineering
Languages : en
Pages : 364
Book Description
The book follows a unified approach to present the basic principles of rocket propulsion in concise and lucid form. This textbook comprises of ten chapters ranging from brief introduction and elements of rocket propulsion, aerothermodynamics to solid, liquid and hybrid propellant rocket engines with chapter on electrical propulsion. Worked out examples are also provided at the end of chapter for understanding uncertainty analysis. This book is designed and developed as an introductory text on the fundamental aspects of rocket propulsion for both undergraduate and graduate students. It is also aimed towards practicing engineers in the field of space engineering. This comprehensive guide also provides adequate problems for audience to understand intricate aspects of rocket propulsion enabling them to design and develop rocket engines for peaceful purposes.
Publisher: CRC Press
ISBN: 1351708414
Category : Technology & Engineering
Languages : en
Pages : 364
Book Description
The book follows a unified approach to present the basic principles of rocket propulsion in concise and lucid form. This textbook comprises of ten chapters ranging from brief introduction and elements of rocket propulsion, aerothermodynamics to solid, liquid and hybrid propellant rocket engines with chapter on electrical propulsion. Worked out examples are also provided at the end of chapter for understanding uncertainty analysis. This book is designed and developed as an introductory text on the fundamental aspects of rocket propulsion for both undergraduate and graduate students. It is also aimed towards practicing engineers in the field of space engineering. This comprehensive guide also provides adequate problems for audience to understand intricate aspects of rocket propulsion enabling them to design and develop rocket engines for peaceful purposes.