An Introduction to Excavation for Structures for Professional Engineers PDF Download

Author: J. Paul Guyer, P.E., R.A.
Publisher: Guyer Partners
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 96

View

Book Description
Introductory technical guidance for civil engineers, geotechnical engineers and construction managers interested in excavation for buildings and other structures. Here is what is discussed: 1. INTRODUCTION, 2. FILL, 3. BACKFILL, 4. EARTHWORK: EXCAVATION AND PREPARATION FOR FOUNDATIONS, 5. BACKFILL OPERATIONS.

Author: Chang-Yu Ou
Publisher: CRC Press
ISBN: 1000431258
Category : Technology & Engineering
Languages : en
Pages : 498

View

Book Description
Excavation is an important segment of foundation engineering (e.g., in the construction of the foundations or basements of high-rise buildings, underground oil tanks, or subways). However, the excavation knowledge introduced in most books on foundation engineering is too simple to handle actual excavation analysis and design. Moreover, with economic development and urbanization, excavations go deeper and are larger in scale. These conditions require elaborate analysis, design methods and construction technologies. This book is aimed at both theoretical explication and practical application. From basic to advanced, this book attempts to achieve theoretical rigor and consistency. Each chapter is followed by a problem set so that the book can be readily taught at senior undergraduate and graduate levels. The solution to the problems at the end of the chapters can be found on the website (http://www.ct.ntust.edu.tw/ou/). On the other hand, the analysis methods introduced in the book can be used in actual analysis and design as they contain the most up-to-date knowledge. Therefore, this book is suitable for teachers who teach foundation engineering and/or deep excavation courses and engineers who are engaged in excavation analysis and design.

Author: Chang-Yu Ou
Publisher: CRC Press
ISBN: 148228846X
Category : Technology & Engineering
Languages : en
Pages : 550

View

Book Description
With continued economic development and increasing urbanization, excavations go deeper and become larger in scale, and are sometimes even carried out in difficult soils. These conditions require advanced analysis and design methods and construction technologies. Most books on general foundation engineering introduce the basic analysis and design of excavation, but do not delve into practical considerations. This book examines both theory and practice, from basic to advanced, and discusses the major methods currently in practice around the world. Each chapter also includes problems and their solutions to develop a practical, real-world understanding.

Author: John Endicott
Publisher: CRC Press
ISBN: 1000077039
Category : Technology & Engineering
Languages : en
Pages : 259

View

Book Description
The book describes the theory and current practices for design of earth lateral support for deep excavations in soil. It addresses basic principles of soil mechanics and explains how these principles are embodied in design methods including hand calculations. It then introduces the use of numerical methods including the fundamental “beam on springs” models, and then more sophisticated computer programmes which can model soil as a continuum in two or three dimensions. Constitutive relationships are introduced that are in use for representing the behaviour of soil including a strain hardening model, and a Cam Clay model including groundwater flow and coupled consolidation. These methods are illustrated by reference to practical applications and case histories from the author’s direct experience, and some of the pitfalls that can occur are discussed. Theory and design are strongly tied to construction practice, with emphasis on monitoring the retaining structures and movement of surrounding ground and structures, in the context of safety and the Observational Method. Examples are presented for conventional “Bottom-up” and “Top-down” sequences, along with hybrid sequences giving tips on how to optimise the design and effect economies of cost and time for construction. It is written for practising geotechnical, civil and structural engineers, and especially for senior and MSc students.

Author: Bernhard Wietek
Publisher: Springer Nature
ISBN: 365835853X
Category : Technology & Engineering
Languages : de
Pages : 381

View

Book Description
Böschungen als geneigte Erdoberflächen kommen überall vor. Sie werden bearbeitet und so der Zustand verändert. Damit müssen auch die Auswirkungen dieser Veränderungen betrachten und sich eine Gewissheit über die Sicherheit der Böschungen verschaffen werden. Erst mit dieser Kenntnis sollten Veränderungen durchgeführt werden um so auch deren Auswirkung die Umgebung abschätzen zu können. Baugruben werden immer tiefer und näher an Nachbarbauten gelegt. Es werden Verfahren angewendet, die den Sicherheitserfordernissen entsprechen. Die wirtschaftlichen Anforderungen lassen oft riskante Verfahren in den Blickwinkel kommen. Es sollte jedoch neben der Kosten besonders die Sicherheit für alle Bauwerke im Vordergrund stehen.

Author: J. Paul Guyer, P.E., R.A.
Publisher: Guyer Partners
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 283

View

Book Description
Introductory technical guidance for civil, structural and geotechnical engineers and construction managers interested in design and construction of foundations for buildings and other structures. Here is what is discussed: 1. BACKFILL FOR SUBSURFACE STRUCTURES 2. BEARING CAPACITY ANALYSIS 3. DEEP FOUNDATIONS 4. EARTHWORK FOR FOUNDATIONS 5. ENGINEERING PROPERTIES OF SOIL AND ROCK 6. EXCAVATION FOR STRUCTURES 7. FIELD AND LABORATORY INVESTIGATIONS FOR FOUNDATIONS IN EXPANSIVE SOILS 8. FOUNDATION DESIGN IN COLD REGIONS 9. FOUNDATIONS ON FILL AND BACKFILLING 10. FOUNDATIONS IN AREAS OF SIGNIFICANT FROST PENETRATION.

Author: Corrado Pedelì
Publisher: Getty Publications
ISBN: 1606061585
Category : Art
Languages : en
Pages : 170

View

Book Description
The relationship between archaeology and conservation has long been complex and, at times, challenging. Archaeologists are often seen as interested principally in excavation and research, while conservators are concerned mainly with stabilization and the prevention of deterioration. Yet it is often initial conservation in the field that determines the long-term survival and intelligibility of both moveable artifacts and fixed architectural features. This user-friendly guide to conservation practices on archaeological excavations covers both structures and artifacts, starting from the moment when they are uncovered. Individual chapters discuss excavation and conservation, environmental and soil issues, deterioration, identification and condition assessment, detachment and removal, initial cleaning, coverings and shelters, packing, and documentation. There are also eight appendixes. Geared primarily for professionals engaged in the physical practice of excavation, this book will also interest archaeologists, archaeological conservators, site managers, conservation scientists, museum curators, and students of archaeology and conservation.

Author: Malcolm Puller
Publisher: Thomas Telford
ISBN: 9780727731500
Category : Technology & Engineering
Languages : en
Pages : 590

View

Book Description
&Quot;This book assembles the practical rules and details for the efficient and economical execution of deep excavations. It draws together a wealth of experience of both design and construction from published work and the lifetime practice of the author. This second edition is extensively revised to include changes in design emphasis including those due to Eurocode 7 and descriptions of the latest equipment, construction techniques and geotechnical processes. Additional details include those of the latest piling and diaphragm wall equipment and innovations in top-down construction applied to basements and cut-and-cover works. The section on caissons has been expanded to include design methods."--BOOK JACKET.

Author: Andrew S. Goudie
Publisher: Cambridge University Press
ISBN: 1316785262
Category : Science
Languages : en
Pages : 335

View

Book Description
The Anthropocene is a major new concept in the Earth sciences and this book examines the effects on geomorphology within this period. Drawing examples from many different global environments, this comprehensive volume demonstrates that human impact on landforms and land-forming processes is profound, due to various driving forces, including: use of fire; extinction of fauna; development of agriculture, urbanisation, and globalisation; and new methods of harnessing energy. The book explores the ways in which future climate change due to anthropogenic causes may further magnify effects on geomorphology, with respect to future hazards such as floods and landslides, the state of the cryosphere, and sea level. The book concludes with a consideration of the ways in which landforms are now being managed and protected. Covering all major aspects of geomorphology, this book is ideal for undergraduate and graduate students studying geomorphology, environmental science and physical geography, and for all researchers of geomorphology.

Author: Hans-Georg Kempfert
Publisher: Springer Science & Business Media
ISBN: 3540328955
Category : Technology & Engineering
Languages : en
Pages : 592

View

Book Description
The book reviews recent developments and research results on excavations and foundations found in and on soft soil deposits. It gives an overview of the material properties of soft soils and offers new foundation improvement techniques in road and railways. It also examines different types of foundations and stabilization methods. The book will serve both practicing and research engineers in the field of geotechnical engineering.