Aerodynamic Characteristics of a Rotorcraft Airfoil Designed for the Tip Region of a Main Rotor Blade PDF Download

Author: Kevin W. Noonan
Publisher:
ISBN:
Category : Aerofoils
Languages : en
Pages : 84

View

Book Description

Author: National Aeronautics and Space Administration (NASA)
Publisher: Createspace Independent Publishing Platform
ISBN: 9781722163167
Category :
Languages : en
Pages : 80

View

Book Description
A wind tunnel investigation was conducted to determine the 2-D aerodynamic characteristics of a new rotorcraft airfoil designed for application to the tip region (stations outboard of 85 pct. radius) of a helicopter main rotor blade. The new airfoil, the RC(6)-08, and a baseline airfoil, the RC(3)-08, were investigated in the Langley 6- by 28-inch transonic tunnel at Mach numbers from 0.37 to 0.90. The Reynolds number varied from 5.2 x 10(exp 6) at the lowest Mach number to 9.6 x 10(exp 6) at the highest Mach number. Some comparisons were made of the experimental data for the new airfoil and the predictions of a transonic, viscous analysis code. The results of the investigation indicate that the RC(6)-08 airfoil met the design goals of attaining higher maximum lift coefficients than the baseline airfoil while maintaining drag divergence characteristics at low lift and pitching moment characteristics nearly the same as those of the baseline airfoil. The maximum lift coefficients of the RC(6)-08 varied from 1.07 at M=0.37 to 0.94 at M=0.52 while those of the RC(3)-08 varied from 0.91 to 0.85 over the same Mach number range. At lift coefficients of -0.1 and 0, the drag divergence Mach number of both the RC(6)-08 and the RC(3)-08 was 0.86. The pitching moment coefficients of the RC(6)-08 were less negative than those of the RC(3)-08 for Mach numbers and lift coefficients typical of those that would occur on a main rotor blade tip at high forward speeds on the advancing side of the rotor disk. Noonan, Kevin W. Langley Research Center...

Author: J. Gordon Leishman
Publisher: Cambridge University Press
ISBN: 9780521523967
Category : Medical
Languages : en
Pages : 544

View

Book Description
Helicopters are highly capable and useful rotating-wing aircraft with roles that encompass a variety of civilian and military applications. Their usefulness lies in their unique ability to take off and land vertically, to hover stationary relative to the ground, and to fly forward, backward, or sideways. These unique flying qualities, however, come at a high cost including complex aerodynamic problems, significant vibrations, high levels of noise, and relatively large power requirements compared to fixed-wing aircraft. This book, written by an internationally recognized expert, provides a thorough, modern treatment of the aerodynamic principles of helicopters and other rotating-wing vertical lift aircraft. Every chapter is extensively illustrated and concludes with a bibliography and homework problems. Advanced undergraduate and graduate students, practising engineers, and researchers will welcome this thorough and up-to-date text on rotating-wing aerodynamics.

Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 134

View

Book Description
Data for rotors using unconventional airfoils are of interest to permit an evaluation of this technology's capability to meet the U.S. Army's need for increased helicopter mission effectiveness and improved safety and survivability. Thus, an experimental investigation was conducted in the Langley Transonic Dynamics Tunnel (TDT) to evaluate the effect of using slotted airfoils in the rotor blade tip region (85 to 100 percent radius) on rotor aerodynamic performance and loads. Four rotor configurations were tested in forward flight at advance ratios from 0.15 to 0.45 and in hover in-ground effect. The hover tip Mach number was 0.627, which is representative of a design point of 4000-ft geometric altitude and a temperature of 95 degrees F. The baseline rotor configuration had a conventional single element airfoil in the tip region. A second rotor configuration had a forward-slotted airfoil with a -6 degrees slat, a third configuration had a forward-slotted airfoil with a -10 degrees slat, and a fourth configuration had an aft-slotted airfoil with a 3 degrees flap (trailing edge down). The results of this investigation indicate that the -6 degrees slat configuration offers some performance and loads benefits over the other three configurations.

Author: Gordon J. Leishman
Publisher: Cambridge University Press
ISBN: 9780521858601
Category : Science
Languages : en
Pages : 860

View

Book Description
Written by an internationally recognized teacher and researcher, this book provides a thorough, modern treatment of the aerodynamic principles of helicopters and other rotating-wing vertical lift aircraft such as tilt rotors and autogiros. The text begins with a unique technical history of helicopter flight, and then covers basic methods of rotor aerodynamic analysis, and related issues associated with the performance of the helicopter and its aerodynamic design. It goes on to cover more advanced topics in helicopter aerodynamics, including airfoil flows, unsteady aerodynamics, dynamic stall, and rotor wakes, and rotor-airframe aerodynamic interactions, with final chapters on autogiros and advanced methods of helicopter aerodynamic analysis. Extensively illustrated throughout, each chapter includes a set of homework problems. Advanced undergraduate and graduate students, practising engineers, and researchers will welcome this thoroughly revised and updated text on rotating-wing aerodynamics.

Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 602

View

Book Description
Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Author: Henry L. Kelley
Publisher:
ISBN:
Category : Rotors (Helicopters)
Languages : en
Pages : 16

View

Book Description
The hover performance of a 27-percent-scale model baseline rotor and advanced rotor with a 3:1 tapered tip (TR3) for the AH-64 attack helicopter was investigated in the rotor test cell at the Langley 14- by 22-foot Subsonic Tunnel as part of ongoing efforts to improve rotorcraft efficiency. The hover performance of the baseline rotor was compared with that of the TR3 rotor and with that of a previously tested advanced rotor with 5:1 tapered tip (TR5). Rotor thrust in hover at a rotor height-to-rotor diameter ratio of 1.46 was varied over a range of thrust coefficients for rotor tip Mach numbers of 0.63 and 0.57 respectively. The rotor with the TR3 blades had improved hover performance as compared with the rotor with the TR5 blades, and both the TR3 and TR5 blades were superior to the baseline rotor in terms of figure of merit for the range of thrust coefficients from 0.0020 to 0.0100. The additional margin in performance for the TR3 blades as compared with the TR5 blades was likely due to an increase in blade area and Reynolds number at the blade tip region brought about by the change in taper ratio from 5:1 to 3:1.

Author:
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 1994

View

Book Description

Author: United States. Congress. Senate. Committee on Appropriations. Subcommittee on Department of Defense
Publisher:
ISBN:
Category : United States
Languages : en
Pages : 2322

View

Book Description

Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 188

View

Book Description