Author: Johan Klarbring
Publisher: Linköping University Electronic Press
ISBN: 9179298559
Category :
Languages : en
Pages : 93
Book Description
This thesis is a first-principles theoretical investigation of solid materials with high degrees of anharmonicity. These are systems where the dynamics of the constituent atoms is too complex to be well-described by a set of uncoupled harmonic oscillators. While theoretical studies of such systems pose a significant challenge, they are under increasing demand due to the prevalence of these sytems in next-generation technological applications. Indeed, very anharmonic systems are ubiquitous in envisioned materials for future solid-state batteries and fuel-cells, thermoelectrics and optoelectronics. In some of these cases, the anharmonicity is a “side-effect” that simply has to be dealt with in order to accurately model certain properties, while in other cases the anharmonicity is the origin of the high-performance of the material. There are two main parts to the thesis: The first is on materials with perovskite-related structures. This is a very large class of materials, members of which are typically highly anharmonic, not least in relation to a series of complex phase transformations between different structural modifications. In the thesis, I have studied a specific class of such phase-transformations that relate to tilting of the framework of octahedra that make up the structure. The oxide CaMnO3 and a set of inorganic halide perovskites were taken as model systems. The results shed some light on the experimentally observed differences between the local and average atomic structure in these systems. I have further studied Cs2AgBiBr6, a member of the so-called lead-free halide double perovskites. I rationalized its temperature induced phase transformation and found high degrees of anharmonicity and ultra-low thermal conductivity. Finally, I studied the influence of nuclear quantum effects, which are often ignored in computational modelling, on the structure and bonding in the hybrid organic-inorganic lead-halide perovskite, CH3NH3PbI3. The second part of the thesis deals with theoretical studies of the phase stability of dynamically disordered solids. These are solids which have some sort of time-averaged long-range order, characteristic of a crystalline solid, but where the anharmonicity is so strong that the basic concept of an equilibrium atomic position cannot be statically assigned to all atoms. Examples include certain solids with very fast ionic conduction, so called superionics, and solids with rotating molecular units. This absence of equilibrium atomic positions makes many standard computational techniques to evaluate phase-stability inapplicable. I outline a method to deal with this issue, which is based on a stress-strain thermodynamic integration on a deformation path from an ordered variant to the dynamically disordered phase itself. I apply the method to study the phase stability of the high-temperature ?-phase of Bi2O3, which is the fastest know solid oxide ion conductor, and to Li2C2, whose high temperature cubic phase contains rotating C2 dimers. The thesis exemplifies the need to go beyond many of the standard approximations used in first-principles computational materials science if accurate theoretical predictions are to be made. This is true, in particular, for many emerging material classes in the field of energy materials. I den konventionella teoretiska modellen för ett (kristallint) fast material antags varje atom kunna tillordnas en jämviktsposition. Rörelsen av atomerna runt dessa jämviktspositioner antags sedan ofta vara harmoniskt, d.v.s. hyfsat kunna beskrivs i termer av en samling (kvantmekaniska) fjädrar. Denna avhandling behandlar teori- och beräkningsstudier av material där ett eller båda av dessa antaganden inte är giltiga, så kallade anharmoniska material. En nogrann teoretisk behandling av sådana material är ofta ordentligt utmanande. I takt med en snabb teknologiska utveckling ställs allt mer specifika och stränga krav på de material som behövs för diverse applikationer. Inom flertalet områden dyker då denna typ av komplexa och anharmoniska material upp som potentiella kandidater. Till exempel som fastelektrolyter för batterier och bränsleceller eller som solcellsmaterial. Inom vissa applikationer är denna anharmonicitet en bieffekt som man helt enkelt måste ta hänsyn till för att kunna göra noggranna teoretiska förutsägelser om diverse materialegenskaper, i andra fall är anharmoniciteten själva ursprunget för materialets goda egenskaper. I den första delen av avhandlingen behandlar jag material som har, eller är nära relaterade till, den så kallade perovskitstrukturen. Detta är en väldigt stor klass av material, och strukturen dyker därför upp inom en mängd olika tillämpningar, inte minst i lovande solcellsmaterial. Dessa material är ofta mycket anharmoniska, vilket tar sig uttryck bland annat i en rad komplexa fastransformationer mellan olika typer av perovskitmodifikationer. I perovskitoxiden CaMnO3, samt i en samling halogenperovskiter, har jag har studerat en specifik typ av fastransformationer som tillkommer på grund av rotationer av de oktaedrar som utgör en del av strukturen. Jag har fortsatt studerat den väldigt kraftiga anharmoniciteten i den så kallade blyfria halogendubbelperovskiten Cs2AgBiBr6, och slutligen har jag studerat hur en kvantmekanisk behandling av atomkärnorna, något som oftast inte görs, påverkar materialegenskaper i CH3NH3PbI3, en så kallad hybrid organisk-inorganisk bly-halogenperovskit, som är ett extremt lovande solcellsmaterial. I den andra delen av avhandlingen studerar jag dynamiskt oordnade fasta material. I dessa material är atomernas rörelse för komplex för att varje atom ska kunna tilldellas en statisk jämviktsposition. Material i denna klass är, till exempel, lovande som fastelektrolyter i bränsleceller och batterier. Mer specifikt studerar jag en typ av fasövergång, från en ordnad fas till en fas med dynamisk oordning, som ofta sker när dessa material värms upp. Jag introducerar en beräkningsmetod för att utvärdera deras fasstabilitet. Metoden är baserad på en så kallad termodynamisk integration, utförd mellan en ordnad variant och den dynamiskt oordnade fasen själv. Metoden gör det möjligt att beräkna fastransformationstemperaturer i denna typ av material. Jag applicerar metoden på Bi2O3, som i sin ?-fas är det fasta material med högst känd syrejonledningsförmåga, samt på Li2C2 vars kubiska fas innehåller roterande C2 molekyler. Resultaten stämmer bra överens med kända experimentella mätningar.
A First-Principles Study of Highly Anharmonic and Dynamically Disordered Solids
Author: Johan Klarbring
Publisher: Linköping University Electronic Press
ISBN: 9179298559
Category :
Languages : en
Pages : 93
Book Description
This thesis is a first-principles theoretical investigation of solid materials with high degrees of anharmonicity. These are systems where the dynamics of the constituent atoms is too complex to be well-described by a set of uncoupled harmonic oscillators. While theoretical studies of such systems pose a significant challenge, they are under increasing demand due to the prevalence of these sytems in next-generation technological applications. Indeed, very anharmonic systems are ubiquitous in envisioned materials for future solid-state batteries and fuel-cells, thermoelectrics and optoelectronics. In some of these cases, the anharmonicity is a “side-effect” that simply has to be dealt with in order to accurately model certain properties, while in other cases the anharmonicity is the origin of the high-performance of the material. There are two main parts to the thesis: The first is on materials with perovskite-related structures. This is a very large class of materials, members of which are typically highly anharmonic, not least in relation to a series of complex phase transformations between different structural modifications. In the thesis, I have studied a specific class of such phase-transformations that relate to tilting of the framework of octahedra that make up the structure. The oxide CaMnO3 and a set of inorganic halide perovskites were taken as model systems. The results shed some light on the experimentally observed differences between the local and average atomic structure in these systems. I have further studied Cs2AgBiBr6, a member of the so-called lead-free halide double perovskites. I rationalized its temperature induced phase transformation and found high degrees of anharmonicity and ultra-low thermal conductivity. Finally, I studied the influence of nuclear quantum effects, which are often ignored in computational modelling, on the structure and bonding in the hybrid organic-inorganic lead-halide perovskite, CH3NH3PbI3. The second part of the thesis deals with theoretical studies of the phase stability of dynamically disordered solids. These are solids which have some sort of time-averaged long-range order, characteristic of a crystalline solid, but where the anharmonicity is so strong that the basic concept of an equilibrium atomic position cannot be statically assigned to all atoms. Examples include certain solids with very fast ionic conduction, so called superionics, and solids with rotating molecular units. This absence of equilibrium atomic positions makes many standard computational techniques to evaluate phase-stability inapplicable. I outline a method to deal with this issue, which is based on a stress-strain thermodynamic integration on a deformation path from an ordered variant to the dynamically disordered phase itself. I apply the method to study the phase stability of the high-temperature ?-phase of Bi2O3, which is the fastest know solid oxide ion conductor, and to Li2C2, whose high temperature cubic phase contains rotating C2 dimers. The thesis exemplifies the need to go beyond many of the standard approximations used in first-principles computational materials science if accurate theoretical predictions are to be made. This is true, in particular, for many emerging material classes in the field of energy materials. I den konventionella teoretiska modellen för ett (kristallint) fast material antags varje atom kunna tillordnas en jämviktsposition. Rörelsen av atomerna runt dessa jämviktspositioner antags sedan ofta vara harmoniskt, d.v.s. hyfsat kunna beskrivs i termer av en samling (kvantmekaniska) fjädrar. Denna avhandling behandlar teori- och beräkningsstudier av material där ett eller båda av dessa antaganden inte är giltiga, så kallade anharmoniska material. En nogrann teoretisk behandling av sådana material är ofta ordentligt utmanande. I takt med en snabb teknologiska utveckling ställs allt mer specifika och stränga krav på de material som behövs för diverse applikationer. Inom flertalet områden dyker då denna typ av komplexa och anharmoniska material upp som potentiella kandidater. Till exempel som fastelektrolyter för batterier och bränsleceller eller som solcellsmaterial. Inom vissa applikationer är denna anharmonicitet en bieffekt som man helt enkelt måste ta hänsyn till för att kunna göra noggranna teoretiska förutsägelser om diverse materialegenskaper, i andra fall är anharmoniciteten själva ursprunget för materialets goda egenskaper. I den första delen av avhandlingen behandlar jag material som har, eller är nära relaterade till, den så kallade perovskitstrukturen. Detta är en väldigt stor klass av material, och strukturen dyker därför upp inom en mängd olika tillämpningar, inte minst i lovande solcellsmaterial. Dessa material är ofta mycket anharmoniska, vilket tar sig uttryck bland annat i en rad komplexa fastransformationer mellan olika typer av perovskitmodifikationer. I perovskitoxiden CaMnO3, samt i en samling halogenperovskiter, har jag har studerat en specifik typ av fastransformationer som tillkommer på grund av rotationer av de oktaedrar som utgör en del av strukturen. Jag har fortsatt studerat den väldigt kraftiga anharmoniciteten i den så kallade blyfria halogendubbelperovskiten Cs2AgBiBr6, och slutligen har jag studerat hur en kvantmekanisk behandling av atomkärnorna, något som oftast inte görs, påverkar materialegenskaper i CH3NH3PbI3, en så kallad hybrid organisk-inorganisk bly-halogenperovskit, som är ett extremt lovande solcellsmaterial. I den andra delen av avhandlingen studerar jag dynamiskt oordnade fasta material. I dessa material är atomernas rörelse för komplex för att varje atom ska kunna tilldellas en statisk jämviktsposition. Material i denna klass är, till exempel, lovande som fastelektrolyter i bränsleceller och batterier. Mer specifikt studerar jag en typ av fasövergång, från en ordnad fas till en fas med dynamisk oordning, som ofta sker när dessa material värms upp. Jag introducerar en beräkningsmetod för att utvärdera deras fasstabilitet. Metoden är baserad på en så kallad termodynamisk integration, utförd mellan en ordnad variant och den dynamiskt oordnade fasen själv. Metoden gör det möjligt att beräkna fastransformationstemperaturer i denna typ av material. Jag applicerar metoden på Bi2O3, som i sin ?-fas är det fasta material med högst känd syrejonledningsförmåga, samt på Li2C2 vars kubiska fas innehåller roterande C2 molekyler. Resultaten stämmer bra överens med kända experimentella mätningar.
Publisher: Linköping University Electronic Press
ISBN: 9179298559
Category :
Languages : en
Pages : 93
Book Description
This thesis is a first-principles theoretical investigation of solid materials with high degrees of anharmonicity. These are systems where the dynamics of the constituent atoms is too complex to be well-described by a set of uncoupled harmonic oscillators. While theoretical studies of such systems pose a significant challenge, they are under increasing demand due to the prevalence of these sytems in next-generation technological applications. Indeed, very anharmonic systems are ubiquitous in envisioned materials for future solid-state batteries and fuel-cells, thermoelectrics and optoelectronics. In some of these cases, the anharmonicity is a “side-effect” that simply has to be dealt with in order to accurately model certain properties, while in other cases the anharmonicity is the origin of the high-performance of the material. There are two main parts to the thesis: The first is on materials with perovskite-related structures. This is a very large class of materials, members of which are typically highly anharmonic, not least in relation to a series of complex phase transformations between different structural modifications. In the thesis, I have studied a specific class of such phase-transformations that relate to tilting of the framework of octahedra that make up the structure. The oxide CaMnO3 and a set of inorganic halide perovskites were taken as model systems. The results shed some light on the experimentally observed differences between the local and average atomic structure in these systems. I have further studied Cs2AgBiBr6, a member of the so-called lead-free halide double perovskites. I rationalized its temperature induced phase transformation and found high degrees of anharmonicity and ultra-low thermal conductivity. Finally, I studied the influence of nuclear quantum effects, which are often ignored in computational modelling, on the structure and bonding in the hybrid organic-inorganic lead-halide perovskite, CH3NH3PbI3. The second part of the thesis deals with theoretical studies of the phase stability of dynamically disordered solids. These are solids which have some sort of time-averaged long-range order, characteristic of a crystalline solid, but where the anharmonicity is so strong that the basic concept of an equilibrium atomic position cannot be statically assigned to all atoms. Examples include certain solids with very fast ionic conduction, so called superionics, and solids with rotating molecular units. This absence of equilibrium atomic positions makes many standard computational techniques to evaluate phase-stability inapplicable. I outline a method to deal with this issue, which is based on a stress-strain thermodynamic integration on a deformation path from an ordered variant to the dynamically disordered phase itself. I apply the method to study the phase stability of the high-temperature ?-phase of Bi2O3, which is the fastest know solid oxide ion conductor, and to Li2C2, whose high temperature cubic phase contains rotating C2 dimers. The thesis exemplifies the need to go beyond many of the standard approximations used in first-principles computational materials science if accurate theoretical predictions are to be made. This is true, in particular, for many emerging material classes in the field of energy materials. I den konventionella teoretiska modellen för ett (kristallint) fast material antags varje atom kunna tillordnas en jämviktsposition. Rörelsen av atomerna runt dessa jämviktspositioner antags sedan ofta vara harmoniskt, d.v.s. hyfsat kunna beskrivs i termer av en samling (kvantmekaniska) fjädrar. Denna avhandling behandlar teori- och beräkningsstudier av material där ett eller båda av dessa antaganden inte är giltiga, så kallade anharmoniska material. En nogrann teoretisk behandling av sådana material är ofta ordentligt utmanande. I takt med en snabb teknologiska utveckling ställs allt mer specifika och stränga krav på de material som behövs för diverse applikationer. Inom flertalet områden dyker då denna typ av komplexa och anharmoniska material upp som potentiella kandidater. Till exempel som fastelektrolyter för batterier och bränsleceller eller som solcellsmaterial. Inom vissa applikationer är denna anharmonicitet en bieffekt som man helt enkelt måste ta hänsyn till för att kunna göra noggranna teoretiska förutsägelser om diverse materialegenskaper, i andra fall är anharmoniciteten själva ursprunget för materialets goda egenskaper. I den första delen av avhandlingen behandlar jag material som har, eller är nära relaterade till, den så kallade perovskitstrukturen. Detta är en väldigt stor klass av material, och strukturen dyker därför upp inom en mängd olika tillämpningar, inte minst i lovande solcellsmaterial. Dessa material är ofta mycket anharmoniska, vilket tar sig uttryck bland annat i en rad komplexa fastransformationer mellan olika typer av perovskitmodifikationer. I perovskitoxiden CaMnO3, samt i en samling halogenperovskiter, har jag har studerat en specifik typ av fastransformationer som tillkommer på grund av rotationer av de oktaedrar som utgör en del av strukturen. Jag har fortsatt studerat den väldigt kraftiga anharmoniciteten i den så kallade blyfria halogendubbelperovskiten Cs2AgBiBr6, och slutligen har jag studerat hur en kvantmekanisk behandling av atomkärnorna, något som oftast inte görs, påverkar materialegenskaper i CH3NH3PbI3, en så kallad hybrid organisk-inorganisk bly-halogenperovskit, som är ett extremt lovande solcellsmaterial. I den andra delen av avhandlingen studerar jag dynamiskt oordnade fasta material. I dessa material är atomernas rörelse för komplex för att varje atom ska kunna tilldellas en statisk jämviktsposition. Material i denna klass är, till exempel, lovande som fastelektrolyter i bränsleceller och batterier. Mer specifikt studerar jag en typ av fasövergång, från en ordnad fas till en fas med dynamisk oordning, som ofta sker när dessa material värms upp. Jag introducerar en beräkningsmetod för att utvärdera deras fasstabilitet. Metoden är baserad på en så kallad termodynamisk integration, utförd mellan en ordnad variant och den dynamiskt oordnade fasen själv. Metoden gör det möjligt att beräkna fastransformationstemperaturer i denna typ av material. Jag applicerar metoden på Bi2O3, som i sin ?-fas är det fasta material med högst känd syrejonledningsförmåga, samt på Li2C2 vars kubiska fas innehåller roterande C2 molekyler. Resultaten stämmer bra överens med kända experimentella mätningar.
Physics Briefs
Chemical Abstracts
Science Abstracts
Energy Research Abstracts
Government Reports Announcements & Index
Halide Perovskites
Author: Tze-Chien Sum
Publisher: John Wiley & Sons
ISBN: 3527341110
Category : Technology & Engineering
Languages : en
Pages : 312
Book Description
Real insight from leading experts in the field into the causes of the unique photovoltaic performance of perovskite solar cells, describing the fundamentals of perovskite materials and device architectures. The authors cover materials research and development, device fabrication and engineering methodologies, as well as current knowledge extending beyond perovskite photovoltaics, such as the novel spin physics and multiferroic properties of this family of materials. Aimed at a better and clearer understanding of the latest developments in the hybrid perovskite field, this is a must-have for material scientists, chemists, physicists and engineers entering or already working in this booming field.
Publisher: John Wiley & Sons
ISBN: 3527341110
Category : Technology & Engineering
Languages : en
Pages : 312
Book Description
Real insight from leading experts in the field into the causes of the unique photovoltaic performance of perovskite solar cells, describing the fundamentals of perovskite materials and device architectures. The authors cover materials research and development, device fabrication and engineering methodologies, as well as current knowledge extending beyond perovskite photovoltaics, such as the novel spin physics and multiferroic properties of this family of materials. Aimed at a better and clearer understanding of the latest developments in the hybrid perovskite field, this is a must-have for material scientists, chemists, physicists and engineers entering or already working in this booming field.
Science
Author: John Michels (Journalist)
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 1014
Book Description
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 1014
Book Description
Introduction to Frustrated Magnetism
Author: Claudine Lacroix
Publisher: Springer Science & Business Media
ISBN: 3642105890
Category : Science
Languages : en
Pages : 682
Book Description
The field of highly frustrated magnetism has developed considerably and expanded over the last 15 years. Issuing from canonical geometric frustration of interactions, it now extends over other aspects with many degrees of freedom such as magneto-elastic couplings, orbital degrees of freedom, dilution effects, and electron doping. Its is thus shown here that the concept of frustration impacts on many other fields in physics than magnetism. This book represents a state-of-the-art review aimed at a broad audience with tutorial chapters and more topical ones, encompassing solid-state chemistry, experimental and theoretical physics.
Publisher: Springer Science & Business Media
ISBN: 3642105890
Category : Science
Languages : en
Pages : 682
Book Description
The field of highly frustrated magnetism has developed considerably and expanded over the last 15 years. Issuing from canonical geometric frustration of interactions, it now extends over other aspects with many degrees of freedom such as magneto-elastic couplings, orbital degrees of freedom, dilution effects, and electron doping. Its is thus shown here that the concept of frustration impacts on many other fields in physics than magnetism. This book represents a state-of-the-art review aimed at a broad audience with tutorial chapters and more topical ones, encompassing solid-state chemistry, experimental and theoretical physics.
Density Functional Theory
Author: David S. Sholl
Publisher: John Wiley & Sons
ISBN: 1118211049
Category : Science
Languages : en
Pages : 252
Book Description
Demonstrates how anyone in math, science, and engineering can master DFT calculations Density functional theory (DFT) is one of the most frequently used computational tools for studying and predicting the properties of isolated molecules, bulk solids, and material interfaces, including surfaces. Although the theoretical underpinnings of DFT are quite complicated, this book demonstrates that the basic concepts underlying the calculations are simple enough to be understood by anyone with a background in chemistry, physics, engineering, or mathematics. The authors show how the widespread availability of powerful DFT codes makes it possible for students and researchers to apply this important computational technique to a broad range of fundamental and applied problems. Density Functional Theory: A Practical Introduction offers a concise, easy-to-follow introduction to the key concepts and practical applications of DFT, focusing on plane-wave DFT. The authors have many years of experience introducing DFT to students from a variety of backgrounds. The book therefore offers several features that have proven to be helpful in enabling students to master the subject, including: Problem sets in each chapter that give readers the opportunity to test their knowledge by performing their own calculations Worked examples that demonstrate how DFT calculations are used to solve real-world problems Further readings listed in each chapter enabling readers to investigate specific topics in greater depth This text is written at a level suitable for individuals from a variety of scientific, mathematical, and engineering backgrounds. No previous experience working with DFT calculations is needed.
Publisher: John Wiley & Sons
ISBN: 1118211049
Category : Science
Languages : en
Pages : 252
Book Description
Demonstrates how anyone in math, science, and engineering can master DFT calculations Density functional theory (DFT) is one of the most frequently used computational tools for studying and predicting the properties of isolated molecules, bulk solids, and material interfaces, including surfaces. Although the theoretical underpinnings of DFT are quite complicated, this book demonstrates that the basic concepts underlying the calculations are simple enough to be understood by anyone with a background in chemistry, physics, engineering, or mathematics. The authors show how the widespread availability of powerful DFT codes makes it possible for students and researchers to apply this important computational technique to a broad range of fundamental and applied problems. Density Functional Theory: A Practical Introduction offers a concise, easy-to-follow introduction to the key concepts and practical applications of DFT, focusing on plane-wave DFT. The authors have many years of experience introducing DFT to students from a variety of backgrounds. The book therefore offers several features that have proven to be helpful in enabling students to master the subject, including: Problem sets in each chapter that give readers the opportunity to test their knowledge by performing their own calculations Worked examples that demonstrate how DFT calculations are used to solve real-world problems Further readings listed in each chapter enabling readers to investigate specific topics in greater depth This text is written at a level suitable for individuals from a variety of scientific, mathematical, and engineering backgrounds. No previous experience working with DFT calculations is needed.