Author: Rexford M. Morey
Publisher: Transportation Research Board
ISBN: 9780309061100
Category : Technology & Engineering
Languages : en
Pages : 48
Book Description
This synthesis will be of interest to state Department of Transportation (DOT) geotechnical, bridge, and pavement engineers, engineering geologists, consultants involved with ground penetrating radar (GPR) investigations for state DOTs, and researchers. It describes the current state of the practice of using GPR for evaluating subsurface conditions for transportation facilities. This was accomplished by conducting a literature search and review and an extensive survey of U.S. and Canadian transportation agencies and practitioners, as well as limited international information collection. GPR is a noninvasive nondestructive tool used in transportation applications such as evaluation and characterization of pavement systems, soils, and environmental problems. This report of the Transportation Research Board presents information on the principles, equipment, logistics, applications, and limitations of GPR pertaining to transportation applications. Selected case studies for which ground truth information is available are presented. In addition, an extensive bibliography and glossary are provided as well as appending information about GPR manufacturers from their literature.
Ground Penetrating Radar for Evaluating Subsurface Conditions for Transportation Facilities
Author: Rexford M. Morey
Publisher: Transportation Research Board
ISBN: 9780309061100
Category : Technology & Engineering
Languages : en
Pages : 48
Book Description
This synthesis will be of interest to state Department of Transportation (DOT) geotechnical, bridge, and pavement engineers, engineering geologists, consultants involved with ground penetrating radar (GPR) investigations for state DOTs, and researchers. It describes the current state of the practice of using GPR for evaluating subsurface conditions for transportation facilities. This was accomplished by conducting a literature search and review and an extensive survey of U.S. and Canadian transportation agencies and practitioners, as well as limited international information collection. GPR is a noninvasive nondestructive tool used in transportation applications such as evaluation and characterization of pavement systems, soils, and environmental problems. This report of the Transportation Research Board presents information on the principles, equipment, logistics, applications, and limitations of GPR pertaining to transportation applications. Selected case studies for which ground truth information is available are presented. In addition, an extensive bibliography and glossary are provided as well as appending information about GPR manufacturers from their literature.
Publisher: Transportation Research Board
ISBN: 9780309061100
Category : Technology & Engineering
Languages : en
Pages : 48
Book Description
This synthesis will be of interest to state Department of Transportation (DOT) geotechnical, bridge, and pavement engineers, engineering geologists, consultants involved with ground penetrating radar (GPR) investigations for state DOTs, and researchers. It describes the current state of the practice of using GPR for evaluating subsurface conditions for transportation facilities. This was accomplished by conducting a literature search and review and an extensive survey of U.S. and Canadian transportation agencies and practitioners, as well as limited international information collection. GPR is a noninvasive nondestructive tool used in transportation applications such as evaluation and characterization of pavement systems, soils, and environmental problems. This report of the Transportation Research Board presents information on the principles, equipment, logistics, applications, and limitations of GPR pertaining to transportation applications. Selected case studies for which ground truth information is available are presented. In addition, an extensive bibliography and glossary are provided as well as appending information about GPR manufacturers from their literature.
Masters Theses in the Pure and Applied Sciences
Author: W. H. Shafer
Publisher: Springer Science & Business Media
ISBN: 1468433814
Category : Science
Languages : en
Pages : 319
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 22 (thesis year 1977) a total of 10,658 theses titles from 28 Canadian and 227 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 22 reports theses submitted in 1977, on occasion, certain universities do report theses submitted in previous years but not reported at the time.
Publisher: Springer Science & Business Media
ISBN: 1468433814
Category : Science
Languages : en
Pages : 319
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 22 (thesis year 1977) a total of 10,658 theses titles from 28 Canadian and 227 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 22 reports theses submitted in 1977, on occasion, certain universities do report theses submitted in previous years but not reported at the time.
Integrated Materials and Construction Practices for Concrete Pavement
Author:
Publisher:
ISBN: 9780965231091
Category : Hydration
Languages : en
Pages : 326
Book Description
Manual of integrated material and construction practices for concrete pavements.
Publisher:
ISBN: 9780965231091
Category : Hydration
Languages : en
Pages : 326
Book Description
Manual of integrated material and construction practices for concrete pavements.
Scientific and Technical Aerospace Reports
Technical Reports Awareness Circular : TRAC.
Energy Research Abstracts
Public Roads
Masters Theses in the Pure and Applied Sciences
Author: Wade H. Shafer
Publisher: Springer Science & Business Media
ISBN: 1461524539
Category : Science
Languages : en
Pages : 391
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the though that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemi nation. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 37 (thesis year 1992) a total of 12,549 thesis titles from 25 Canadian and 153 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 37 reports theses submitted in 1992, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Publisher: Springer Science & Business Media
ISBN: 1461524539
Category : Science
Languages : en
Pages : 391
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the though that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemi nation. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 37 (thesis year 1992) a total of 12,549 thesis titles from 25 Canadian and 153 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 37 reports theses submitted in 1992, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.