Author: Tasoglu Savas Publisher: ISBN: 9783038974680 Category : Electronic books Languages : en Pages : 1
Book Description
3D printing has revolutionized the microfabrication prototyping workflow over the past few years. With the recent improvements in 3D printing technologies, highly complex microfluidic devices can be fabricated via single-step, rapid, and cost-effective protocols as a promising alternative to the time consuming, costly and sophisticated traditional cleanroom fabrication. Microfluidic devices have enabled a wide range of biochemical and clinical applications, such as cancer screening, micro-physiological system engineering, high-throughput drug testing, and point-of-care diagnostics. Using 3D printing fabrication technologies, alteration of the design features is significantly easier than traditional fabrication, enabling agile iterative design and facilitating rapid prototyping. This can make microfluidic technology more accessible to researchers in various fields and accelerates innovation in the field of microfluidics. Accordingly, this Special Issue seeks to showcase research papers, short communications, and review articles that focus on novel methodological developments in 3D printing and its use for various biochemical and biomedical applications.
Author: Michael Kohlmann Publisher: Springer ISBN: Category : Mathematics Languages : en Pages : 634
Book Description
Microfluidics for Biological Applications provides researchers and scientists in the biotechnology, pharmaceutical, and life science industries with an introduction to the basics of microfluidics and also discusses how to link these technologies to various biological applications at the industrial and academic level. Readers will gain insight into a wide variety of biological applications for microfluidics. The material presented here is divided into four parts, Part I gives perspective on the history and development of microfluidic technologies, Part II presents overviews on how microfluidic systems have been used to study and manipulate specific classes of components, Part III focuses on specific biological applications of microfluidics: biodefense, diagnostics, high throughput screening, and tissue engineering and finally Part IV concludes with a discussion of emerging trends in the microfluidics field and the current challenges to the growth and continuing success of the field.
Author: Xiujun James Li Publisher: Woodhead Publishing ISBN: 9780857096975 Category : Technology & Engineering Languages : en Pages : 0
Book Description
Microfluidics or lab-on-a-chip (LOC) is an important technology suitable for numerous applications from drug delivery to tissue engineering. Microfluidic devices for biomedical applications discusses the fundamentals of microfluidics and explores in detail a wide range of medical applications. The first part of the book reviews the fundamentals of microfluidic technologies for biomedical applications with chapters focussing on the materials and methods for microfabrication, microfluidic actuation mechanisms and digital microfluidic technologies. Chapters in part two examine applications in drug discovery and controlled-delivery including micro needles. Part three considers applications of microfluidic devices in cellular analysis and manipulation, tissue engineering and their role in developing tissue scaffolds and stem cell engineering. The final part of the book covers the applications of microfluidic devices in diagnostic sensing, including genetic analysis, low-cost bioassays, viral detection, and radio chemical synthesis. Microfluidic devices for biomedical applications is an essential reference for medical device manufacturers, scientists and researchers concerned with microfluidics in the field of biomedical applications and life-science industries.
Author: Madhulika Pradhan Publisher: CRC Press ISBN: 1040131875 Category : Medical Languages : en Pages : 439
Book Description
3D Printing and Microfluidics in Dermatology provides a thorough exploration and applications of three-dimensional (3D) printing and microfluidics within the field of dermatology. It investigates various methods utilized in these fields, such as 3D bioprinting, nano-transporters, microscopic fabrication, and device development. The book not only examines practical applications but also delves into the design principles crucial for implementing these techniques using specific materials tailored to their intended purposes. Additionally, it addresses ethical concerns and regulatory considerations pertinent to these evolving technologies. Key highlights include the following: A detailed insight into the utilization of 3D printing and microfluidic technologies for treating skin disorders. Exploration of design concepts necessary for effective implementation, considering the unique properties of materials involved. Coverage of diverse methodologies, ranging from 3D bioprinting to nano-transporters, microscopic fabrication, and device engineering. In-depth discussion on ethical considerations vital for the sustainable development of the industry. Investigation into advancements in material development, device design, fabrication techniques, and performance evaluation through preclinical and clinical studies. This book targets graduate students and researchers in fields such as 3D printing, dermatology, drug delivery, bioengineering, and pharmaceutical sciences.
Author: Andreas Manz Publisher: Royal Society of Chemistry ISBN: 1782628339 Category : Science Languages : en Pages : 307
Book Description
Responding to the need for an affordable, easy-to-read textbook that introduces microfluidics to undergraduate and postgraduate students, this concise book will provide a broad overview of the important theoretical and practical aspects of microfluidics and lab-on-a-chip, as well as its applications.
Author: Albert Folch Publisher: CRC Press ISBN: 1466509384 Category : Medical Languages : en Pages : 528
Book Description
The entire scope of the BioMEMS field-at your fingertipsHelping to educate the new generation of engineers and biologists, Introduction to BioMEMS explains how certain problems in biology and medicine benefit from and often require the miniaturization of devices. The book covers the whole breadth of this dynamic field, including classical microfabr
Author: Hua Gong Publisher: ISBN: Category : Languages : en Pages : 141
Book Description
With the custom 3D printer, smaller valves and pumps become possible, which led to the invention of a new method of creating large numbers of high density chip-to-chip microfluidic interconnects based on either simple integrated microgaskets (SIMS) or controlled-compression in integrated microgaskets (CCIMs). Since these structures are directly 3D printed as part of a device, they require no additional materials or fabrication steps. As a demonstration of the efficacy of this approach, 121 chip-to-chip interconnects in an 11 x 11 array for both SIMs and CCIMs with an areal density of 53 interconnects per mm2 were demonstrated, and tested up to 50 psi without leaking. Finally, these interconnects were used in the development of 3D printed chips with valves having 30x smaller volume than the valves we previously demonstrated. These valves served as a building block for demonstrating the miniaturization potential of an active fluid mixer using our 3D printing tools, materials, and methods. The mixer provided a set of selectable mixing ratios, and was designed in 2 configurations, a linear dilution mixer-pump (LDMP) and a parallelized dilution mixer-pump (PDMP), which occupy volumes of only 1.5 mm3 and 2.6 mm3, respectively.
Author: Sunpreet Singh Publisher: Springer Nature ISBN: 9811554242 Category : Technology & Engineering Languages : en Pages : 346
Book Description
This book gives a comprehensive overview of the rapidly evolving field of three-dimensional (3D) printing, and its increasing applications in the biomedical domain. 3D printing has distinct advantages like improved quality, cost-effectiveness, and higher efficiency compared to traditional manufacturing processes. Besides these advantages, current challenges and opportunities regarding choice of material, design, and efficiency are addressed in the book. Individual chapters also focus on select areas of applications such as surgical guides, tissue regeneration, artificial scaffolds and implants, and drug delivery and release. This book will be a valuable source of information for researchers and professionals interested in the expanding biomedical applications of 3D printing.
Author: Anming Hu Publisher: Springer Nature ISBN: 3030593134 Category : Science Languages : en Pages : 360
Book Description
This book provides a comprehensive overview of the latest advances in laser techniques for micro-nano-manufacturing and an in-depth analysis of applications, such as 3D printing and nanojoining. Lasers have gained increasing significance as a precise tool for advanced manufacturing. Written by world leading scientists, the first part of the book presents the fundamentals of laser interaction with materials at the micro- and nanoscale, including multiphoton excitation and nonthermal melting, and allows readers to better understand advanced processing. In the second part, the authors focus on various advanced fabrications, such as laser peening, surface nanoengineering, and plasmonic heating. Finally, case studies are devoted to special applications, such as 3D printing, microfluidics devices, energy devices, and plasmonic and photonic waveguides. This book integrates both theoretical and experimental analysis. The combination of tutorial chapters and concentrated case studies will be critically attractive to undergraduate and graduate students, researchers, and engineers in the relevant fields. Readers will grasp the full picture of the application of laser for micro-nanomanufacturing and 3D printing.
Author: Savas Tasoglu
Author: Tasoglu Savas
Author: Michael Kohlmann
Author: Xiujun James Li
Author: Madhulika Pradhan
Author: Andreas Manz
Author: Albert Folch
Author: Hua Gong
Author: Sunpreet Singh
Author: Anming Hu