Author: Joseph M. BayerPublisher:
ISBN:
Category :
Languages : en
Pages : 370
Book Description
Zero-dimensional Direct-injection Spray and Particulate Emission Modeling
Author: Joseph M. BayerDevelopment of an Integrated Diesel Engine, Emissions, and Aftertreatment System Level Model
Author: Stephen B. EnglandDevelopment of an Integrated Diesel Engine, Emissions, and Aftertreatment System Level Model
Author: Nawateja SiṅghaModelling Diesel Combustion
Author: P. A. LakshminarayananPublisher: Springer Nature
ISBN: 981166742X
Category : Technology & Engineering
Languages : en
Pages : 419
Book Description
This book comprehensively discusses diesel combustion phenomena like ignition delay, fuel-air mixing, rate of heat release, and emissions of smoke, particulate and nitric oxide. It enables quantitative evaluation of these important phenomena and parameters. Most importantly, it attempts to model them with constants that are independent of engine types and hence they could be applied by the engineers and researchers for a general engine. This book emphasizes the importance of the spray at the wall in precisely describing the heat release and emissions for most of the engines on and off-road. It gives models for heat release and emissions. Every model is thoroughly validated by detailed experiments using a broad range of engines. The book describes an elegant quasi-one-dimensional model for heat release in diesel engines with single as well as multiple injections. The book describes how the two aspects, namely, fuel injection rate and the diameter of the combustion bowl in the piston, have enabled meeting advanced emission, noise, and performance standards. The book also discusses the topics of computational fluid dynamics encompassing RANS and LES models of turbulence. Given the contents, this book will be useful for students, researchers and professionals working in the area of vehicle engineering and engine technology. This book will also be a good professional book for practising engineers in the field of combustion engines and automotive engineering.
Development of a Kinetic/phenomenological CO Emission Model for Conventional and LTC Diesel Combustion
Author: Nilesh L. BagalThermal Studies of Diesel Engine Exhaust Systems
Author: David J. KapparosTransformational Science And Technology For The Current And Future Force (With Cd-rom) - Proceedings Of The 24th Us Army Science Conference
Author: A M RajendranPublisher: World Scientific
ISBN: 9814476684
Category : Technology & Engineering
Languages : en
Pages : 601
Book Description
This book provides the reader with a unique opportunity to understand the basic and applied research and technology areas that support applications to enable Transformational capabilities for US Soldiers. The research papers are in line with the theme of the 24th Army Science Conference: “Transformational Science and Technology for the Current and Future Force,” emphasizing the critical role of Science and Technology in addressing the significant challenges posed by Global War On Terrorism while simultaneously developing Transformational capabilities for the Future Force.
Modelling Diesel Combustion
Author: P. A. LakshminarayananPublisher: Springer Science & Business Media
ISBN: 904813885X
Category : Technology & Engineering
Languages : en
Pages : 313
Book Description
Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.
Engine Exhaust Particulates
Author: Avinash Kumar AgarwalPublisher: Springer
ISBN: 9811332991
Category : Technology & Engineering
Languages : en
Pages : 269
Book Description
This book provides a comparative analysis of both diesel and gasoline engine particulates, and also of the emissions resulting from the use of alternative fuels. Written by respected experts, it offers comprehensive insights into motor vehicle particulates, their formation, composition, location, measurement, characterisation and toxicology. It also addresses exhaust-gas treatment and legal, measurement-related and technological advancements concerning emissions. The book will serve as a valuable resource for academic researchers and professional automotive engineers alike.
Biofueled Reciprocating Internal Combustion Engines
Author: K.A. SubramanianPublisher: CRC Press
ISBN: 1138033197
Category : Technology & Engineering
Languages : en
Pages : 262
Book Description
Biofuels such as ethanol, butanol, and biodiesel have more desirable physico-chemical properties than base petroleum fuels (diesel and gasoline), making them more suitable for use in internal combustion engines. The book begins with a comprehensive review of biofuels and their utilization processes and culminates in an analysis of biofuel quality and impact on engine performance and emissions characteristics, while discussing relevant engine types, combustion aspects and effect on greenhouse gases. It will facilitate scattered information on biofuels and its utilization has to be integrated as a single information source. The information provided in this book would help readers to update their basic knowledge in the area of "biofuels and its utilization in internal combustion engines and its impact Environment and Ecology". It will serve as a reference source for UG/PG/Ph.D. Doctoral Scholars for their projects / research works and can provide valuable information to Researchers from Academic Universities and Industries. Key Features: • Compiles exhaustive information of biofuels and their utilization in internal combustion engines. • Explains engine performance of biofuels • Studies impact of biofuels on greenhouse gases and ecology highlighting integrated bio-energy system. • Discusses fuel quality of different biofuels and their suitability for internal combustion engines. • Details effects of biofuels on combustion and emissions characteristics.