Wind Tunnel Evaluation of a Model Helicopter Main-Rotor Blade With Slotted Airfoils at the Tip PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Wind Tunnel Evaluation of a Model Helicopter Main-Rotor Blade With Slotted Airfoils at the Tip PDF full book. Access full book title Wind Tunnel Evaluation of a Model Helicopter Main-Rotor Blade With Slotted Airfoils at the Tip by . Download full books in PDF and EPUB format.
Author: Publisher: ISBN: Category : Languages : en Pages : 134
Book Description
Data for rotors using unconventional airfoils are of interest to permit an evaluation of this technology's capability to meet the U.S. Army's need for increased helicopter mission effectiveness and improved safety and survivability. Thus, an experimental investigation was conducted in the Langley Transonic Dynamics Tunnel (TDT) to evaluate the effect of using slotted airfoils in the rotor blade tip region (85 to 100 percent radius) on rotor aerodynamic performance and loads. Four rotor configurations were tested in forward flight at advance ratios from 0.15 to 0.45 and in hover in-ground effect. The hover tip Mach number was 0.627, which is representative of a design point of 4000-ft geometric altitude and a temperature of 95 degrees F. The baseline rotor configuration had a conventional single element airfoil in the tip region. A second rotor configuration had a forward-slotted airfoil with a -6 degrees slat, a third configuration had a forward-slotted airfoil with a -10 degrees slat, and a fourth configuration had an aft-slotted airfoil with a 3 degrees flap (trailing edge down). The results of this investigation indicate that the -6 degrees slat configuration offers some performance and loads benefits over the other three configurations.
Author: Publisher: ISBN: Category : Languages : en Pages : 134
Book Description
Data for rotors using unconventional airfoils are of interest to permit an evaluation of this technology's capability to meet the U.S. Army's need for increased helicopter mission effectiveness and improved safety and survivability. Thus, an experimental investigation was conducted in the Langley Transonic Dynamics Tunnel (TDT) to evaluate the effect of using slotted airfoils in the rotor blade tip region (85 to 100 percent radius) on rotor aerodynamic performance and loads. Four rotor configurations were tested in forward flight at advance ratios from 0.15 to 0.45 and in hover in-ground effect. The hover tip Mach number was 0.627, which is representative of a design point of 4000-ft geometric altitude and a temperature of 95 degrees F. The baseline rotor configuration had a conventional single element airfoil in the tip region. A second rotor configuration had a forward-slotted airfoil with a -6 degrees slat, a third configuration had a forward-slotted airfoil with a -10 degrees slat, and a fourth configuration had an aft-slotted airfoil with a 3 degrees flap (trailing edge down). The results of this investigation indicate that the -6 degrees slat configuration offers some performance and loads benefits over the other three configurations.
Author: National Aeronautics and Space Administration (NASA) Publisher: Createspace Independent Publishing Platform ISBN: 9781721101931 Category : Languages : en Pages : 132
Book Description
Data for rotors using unconventional airfoils are of interest to permit an evaluation of this technology's capability to meet the U.S. Army's need for increased helicopter mission effectiveness and improved safety and survivability. Thus, an experimental investigation was conducted in the Langley Transonic Dynamics Tunnel (TDT) to evaluate the effect of using slotted airfoils in the rotor blade tip region (85 to 100 percent radius) on rotor aerodynamic performance and loads. Four rotor configurations were tested in forward flight at advance ratios from 0.15 to 0.45 and in hover in-ground effect. The hover tip Mach number was 0.627, which is representative of a design point of 4000-ft geometric altitude and a temperature of 95 F. The baseline rotor configuration had a conventional single-element airfoil in the tip region. A second rotor configuration had a forward-slotted airfoil with a -6 deg slat, a third configuration had a forward-slotted airfoil with a -10 slat, and a fourth configuration had an aft-slotted airfoil with a 3 deg flap (trailing edge down). The results of this investigation indicate that the -6 deg slat configuration offers some performance and loads benefits over the other three configurations. Noonan, Kevin W. and Yeager, William T., Jr. and Singleton, Jeffrey D. and Wilbur, Matthew L. and Mirick, Paul H. Langley Research Center RTOP 581-10-11-01
Author: 
Author: 
Author: National Aeronautics and Space Administration (NASA)
Author: 
Author: Kevin W. Noonan
Author: 
Author: 
Author: 
Author: 
Author: 
Author: