Author: Fred Kerr
Publisher: Pen and Sword Transport
ISBN: 1399013408
Category : Transportation
Languages : en
Pages : 130
Book Description
When British Railways initiated its Modernisation Plan in 1955, its Western Region elected to trial locomotive designs with hydraulic transmission whilst BR encouraged designs with electric transmission. The Western Region felt that the lighter weight of 78 tons for a diesel hydraulic locomotive producing 2000 hp, compared to an equivalent weight of 132 tons for a diesel electric locomotive producing 2000 hp, would better meet BR’s requirement for a modern locomotive. BR’s failure to follow up with its declared policy of having all freight vehicles fitted with brakes saw operators preferring the heavier diesel electric designs which proved more able to operate trains without through brakes at higher speed. The greatest concern was with operating costs whereby the Western Region policy of replacing components at the depot then transferring them to Swindon for repair incurred heavy costs that were reflected in the maintenance cost per locomotive. Given the smaller number of diesel hydraulic locomotives and the larger number of diesel electric locomotives it was little surprise that by the mid-1960s a cost comparison showed that the build and operation of diesel electric locomotives was increasingly cheaper over the long term. Furthermore the increased availability of diesel electric locomotives released by a combination of factors provided an opportunity to replace the diesel hydraulic fleet, which was withdrawn from service during the 1970s. The preservation of redundant locomotives was slow but once it was confirmed, by the preservation of ‘Hymek’ Class 35 D7017 in 1975, that public appeals could quickly fund the preservation of withdrawn examples further public appeals followed. In a short space of time 31 locomotives from a mixed fleet of 358 locomotives entered preservation to remind both enthusiasts and the public of a concept (i.e. hydraulic transmission) that had had much to offer but had been dismissed on questionable financial grounds.
Western Diesel Hydraulic Locomotives in Preservation
Author: Fred Kerr
Publisher: Pen and Sword Transport
ISBN: 1399013408
Category : Transportation
Languages : en
Pages : 130
Book Description
When British Railways initiated its Modernisation Plan in 1955, its Western Region elected to trial locomotive designs with hydraulic transmission whilst BR encouraged designs with electric transmission. The Western Region felt that the lighter weight of 78 tons for a diesel hydraulic locomotive producing 2000 hp, compared to an equivalent weight of 132 tons for a diesel electric locomotive producing 2000 hp, would better meet BR’s requirement for a modern locomotive. BR’s failure to follow up with its declared policy of having all freight vehicles fitted with brakes saw operators preferring the heavier diesel electric designs which proved more able to operate trains without through brakes at higher speed. The greatest concern was with operating costs whereby the Western Region policy of replacing components at the depot then transferring them to Swindon for repair incurred heavy costs that were reflected in the maintenance cost per locomotive. Given the smaller number of diesel hydraulic locomotives and the larger number of diesel electric locomotives it was little surprise that by the mid-1960s a cost comparison showed that the build and operation of diesel electric locomotives was increasingly cheaper over the long term. Furthermore the increased availability of diesel electric locomotives released by a combination of factors provided an opportunity to replace the diesel hydraulic fleet, which was withdrawn from service during the 1970s. The preservation of redundant locomotives was slow but once it was confirmed, by the preservation of ‘Hymek’ Class 35 D7017 in 1975, that public appeals could quickly fund the preservation of withdrawn examples further public appeals followed. In a short space of time 31 locomotives from a mixed fleet of 358 locomotives entered preservation to remind both enthusiasts and the public of a concept (i.e. hydraulic transmission) that had had much to offer but had been dismissed on questionable financial grounds.
Publisher: Pen and Sword Transport
ISBN: 1399013408
Category : Transportation
Languages : en
Pages : 130
Book Description
When British Railways initiated its Modernisation Plan in 1955, its Western Region elected to trial locomotive designs with hydraulic transmission whilst BR encouraged designs with electric transmission. The Western Region felt that the lighter weight of 78 tons for a diesel hydraulic locomotive producing 2000 hp, compared to an equivalent weight of 132 tons for a diesel electric locomotive producing 2000 hp, would better meet BR’s requirement for a modern locomotive. BR’s failure to follow up with its declared policy of having all freight vehicles fitted with brakes saw operators preferring the heavier diesel electric designs which proved more able to operate trains without through brakes at higher speed. The greatest concern was with operating costs whereby the Western Region policy of replacing components at the depot then transferring them to Swindon for repair incurred heavy costs that were reflected in the maintenance cost per locomotive. Given the smaller number of diesel hydraulic locomotives and the larger number of diesel electric locomotives it was little surprise that by the mid-1960s a cost comparison showed that the build and operation of diesel electric locomotives was increasingly cheaper over the long term. Furthermore the increased availability of diesel electric locomotives released by a combination of factors provided an opportunity to replace the diesel hydraulic fleet, which was withdrawn from service during the 1970s. The preservation of redundant locomotives was slow but once it was confirmed, by the preservation of ‘Hymek’ Class 35 D7017 in 1975, that public appeals could quickly fund the preservation of withdrawn examples further public appeals followed. In a short space of time 31 locomotives from a mixed fleet of 358 locomotives entered preservation to remind both enthusiasts and the public of a concept (i.e. hydraulic transmission) that had had much to offer but had been dismissed on questionable financial grounds.
The Railway Preservation Revolution
Author: Jonathan Brown
Publisher: Casemate Publishers
ISBN: 1473891191
Category : Transportation
Languages : en
Pages : 239
Book Description
A ride on a steam train is a popular family outing. More than 100 heritage railways cater for that demand, capturing the spirit of nostalgia while preserving the engines and equipment of past days of rail travel. Their interests even extend to the modern era of 1960's - 70's diesels.Those heritage railways themselves have a long pedigree, back to 1951, when a group of enthusiasts saved the Talyllyn Railway in mid-Wales from closure. They ran this railway as volunteers, out of their love of the little trains and a desire to keep it going. Their example was followed by many more preservation societies who preserved and restored branch lines, country lines and industrial lines for our enjoyment now.Six decades have passed, and we are now beginning to realize what an impressive history the heritage railway movement has. This book traces that history, from the humble beginnings the hopes and ambitions of the pioneers on the different railway projects. There were times of failure and frustration, as some fell by the wayside, but others have made it through times of adversity to become the major heritage businesses of today.
Publisher: Casemate Publishers
ISBN: 1473891191
Category : Transportation
Languages : en
Pages : 239
Book Description
A ride on a steam train is a popular family outing. More than 100 heritage railways cater for that demand, capturing the spirit of nostalgia while preserving the engines and equipment of past days of rail travel. Their interests even extend to the modern era of 1960's - 70's diesels.Those heritage railways themselves have a long pedigree, back to 1951, when a group of enthusiasts saved the Talyllyn Railway in mid-Wales from closure. They ran this railway as volunteers, out of their love of the little trains and a desire to keep it going. Their example was followed by many more preservation societies who preserved and restored branch lines, country lines and industrial lines for our enjoyment now.Six decades have passed, and we are now beginning to realize what an impressive history the heritage railway movement has. This book traces that history, from the humble beginnings the hopes and ambitions of the pioneers on the different railway projects. There were times of failure and frustration, as some fell by the wayside, but others have made it through times of adversity to become the major heritage businesses of today.
Great Western, 0-6-0 Tender Goods Locomotive Classes
Author: David Maidment
Publisher: Pen and Sword Transport
ISBN: 1399054708
Category : Transportation
Languages : en
Pages : 271
Book Description
This book is a comprehensive history of all the 0-6-0 tender locomotives built by the Great Western Railway or by railways absorbed by the GWR from the very earliest broad gauge engines designed by Daniel Gooch to the Collett 2251 class of the 1930s some of which were still under construction at nationalisation. It includes the Joseph Armstrong ‘Standard Goods’ and the famous Dean Goods, many of which served overseas in the two world wars. The text of 40,000 words describes the design, construction and operation of eight GW and five ‘Absorbed’ broad gauge classes, and thirteen GW and thirteen ‘Absorbed’ standard gauge classes. The book has over 250 black and white and 30 color photos, weight diagrams and drawings.
Publisher: Pen and Sword Transport
ISBN: 1399054708
Category : Transportation
Languages : en
Pages : 271
Book Description
This book is a comprehensive history of all the 0-6-0 tender locomotives built by the Great Western Railway or by railways absorbed by the GWR from the very earliest broad gauge engines designed by Daniel Gooch to the Collett 2251 class of the 1930s some of which were still under construction at nationalisation. It includes the Joseph Armstrong ‘Standard Goods’ and the famous Dean Goods, many of which served overseas in the two world wars. The text of 40,000 words describes the design, construction and operation of eight GW and five ‘Absorbed’ broad gauge classes, and thirteen GW and thirteen ‘Absorbed’ standard gauge classes. The book has over 250 black and white and 30 color photos, weight diagrams and drawings.
London's Railways 1967-1977
Author: Jim Blake
Publisher: Wharncliffe
ISBN: 1473833841
Category : Transportation
Languages : en
Pages : 176
Book Description
This pictorial book covers London's railways from 1967 to 1977, showing the transition from steam to diesel and electric traction. This volume has a very readable narrative, telling tales of the authors adventures during his many trips around the London railway network. The volume encapsulates a period of time in Britain, during which a great deal of change was taking place, not only with railways and transport, but also socially and economically. Jim Blake, describes all of these changes, while also looking at the capitals transport scene of the period.
Publisher: Wharncliffe
ISBN: 1473833841
Category : Transportation
Languages : en
Pages : 176
Book Description
This pictorial book covers London's railways from 1967 to 1977, showing the transition from steam to diesel and electric traction. This volume has a very readable narrative, telling tales of the authors adventures during his many trips around the London railway network. The volume encapsulates a period of time in Britain, during which a great deal of change was taking place, not only with railways and transport, but also socially and economically. Jim Blake, describes all of these changes, while also looking at the capitals transport scene of the period.
BR Swindon Type 1
Author: Anthony P. Sayer
Publisher: Pen and Sword Transport
ISBN: 1526792389
Category : Transportation
Languages : en
Pages : 412
Book Description
In 1957 the Western Region of BR identified a need for 400 Type 1 diesel locomotives for short-haul freight duties but it was 1964 before the first was introduced. General-purpose Type 1s were being delivered elsewhere but WR management regarded these as too expensive for their requirements. After completion of design work on the ‘Western’ locomotives, Swindon turned to creating a cheap ‘no-frills’ Type 1. At 65% of the cost of the Bo-Bo alternative, the Swindon 0-6-0 represented a better ‘fit’ for the trip-freight niche. Since 1957 the privatised road-haulage industry had decimated BR’s wagon-load sector; whilst the 1962 Transport Act released BR from its financially-debilitating public-service obligations, the damage had been done, and the 1963 Beeching Plan focused on closing unprofitable routes and associated services. By 1963 the original requirement for 400 Type 1s had been massively reduced. Fifty-six locomotives were constructed in 1964/65. Continuing traffic losses resulted in the whole class becoming redundant by 1969. Fortuitously, a demand for high-powered diesels on the larger industrial railway systems saw the bulk of the locomotives finding useful employment for a further twenty years. This book covers the life of these locomotives on British Railways; a companion volume will provide an extensive appraisal of "Their Life in Industry" for the forty-eight locomotives which made the successful transition after withdrawal from BR
Publisher: Pen and Sword Transport
ISBN: 1526792389
Category : Transportation
Languages : en
Pages : 412
Book Description
In 1957 the Western Region of BR identified a need for 400 Type 1 diesel locomotives for short-haul freight duties but it was 1964 before the first was introduced. General-purpose Type 1s were being delivered elsewhere but WR management regarded these as too expensive for their requirements. After completion of design work on the ‘Western’ locomotives, Swindon turned to creating a cheap ‘no-frills’ Type 1. At 65% of the cost of the Bo-Bo alternative, the Swindon 0-6-0 represented a better ‘fit’ for the trip-freight niche. Since 1957 the privatised road-haulage industry had decimated BR’s wagon-load sector; whilst the 1962 Transport Act released BR from its financially-debilitating public-service obligations, the damage had been done, and the 1963 Beeching Plan focused on closing unprofitable routes and associated services. By 1963 the original requirement for 400 Type 1s had been massively reduced. Fifty-six locomotives were constructed in 1964/65. Continuing traffic losses resulted in the whole class becoming redundant by 1969. Fortuitously, a demand for high-powered diesels on the larger industrial railway systems saw the bulk of the locomotives finding useful employment for a further twenty years. This book covers the life of these locomotives on British Railways; a companion volume will provide an extensive appraisal of "Their Life in Industry" for the forty-eight locomotives which made the successful transition after withdrawal from BR
BR Swindon Type 1 0-6-0 Diesel-Hydraulic Locomotives—Class 14
Author: Anthony P. Sayer
Publisher: Pen and Sword Transport
ISBN: 1399019201
Category : Transportation
Languages : en
Pages : 298
Book Description
A pictorial survey of the Class 14 locomotive’s twenty-year history in British industry. In 1957 the Western Region of British Railways identified a need for 400 Type 1 diesel locomotives for short-haul freight duties, but it was 1964 before the first was introduced. General-purpose Type 1s were being delivered elsewhere but WR management regarded these as too expensive for their requirements. After completion of design work on the ‘Western’ locomotives, Swindon turned to creating a cheap ‘no-frills’ Type 1. At 65% of the cost of the Bo-Bo alternative, the Swindon 0-6-0 represented a better ‘fit’ for the trip-freight niche. Since 1957 the privatised road-haulage industry had decimated BR’s wagon-load sector; whilst the 1962 Transport Act released BR from its financially-debilitating public-service obligations, the damage had been done, and the 1963 Beeching Plan focused on closing unprofitable routes and associated services. By 1963 the original requirement for 400 Type 1s had been massively reduced. Fifty-six locomotives were constructed in 1964/65. Continuing traffic losses resulted in the whole class becoming redundant by 1969. Fortuitously, a demand for high-powered diesels on the larger industrial railway systems saw the bulk of the locomotives finding useful employment for a further twenty years. This companion book to “Their Life on British Railways” provides an extensive appraisal of “Their Life in Industry” for the forty-eight locomotives which made the successful transition after withdrawal from BR in 1968/69. “Inside is the most extensive published work on Class 14s in industry with illustrations, tabulated data, complete dates and records, plus information and maps about the coal and steel sites at which they worked. Comprehensive.” —Trackside magazine “The amount of detail and level of research is impressive, and this series of books is invaluable for anyone interested in modern traction history.” —Railways Illustrated
Publisher: Pen and Sword Transport
ISBN: 1399019201
Category : Transportation
Languages : en
Pages : 298
Book Description
A pictorial survey of the Class 14 locomotive’s twenty-year history in British industry. In 1957 the Western Region of British Railways identified a need for 400 Type 1 diesel locomotives for short-haul freight duties, but it was 1964 before the first was introduced. General-purpose Type 1s were being delivered elsewhere but WR management regarded these as too expensive for their requirements. After completion of design work on the ‘Western’ locomotives, Swindon turned to creating a cheap ‘no-frills’ Type 1. At 65% of the cost of the Bo-Bo alternative, the Swindon 0-6-0 represented a better ‘fit’ for the trip-freight niche. Since 1957 the privatised road-haulage industry had decimated BR’s wagon-load sector; whilst the 1962 Transport Act released BR from its financially-debilitating public-service obligations, the damage had been done, and the 1963 Beeching Plan focused on closing unprofitable routes and associated services. By 1963 the original requirement for 400 Type 1s had been massively reduced. Fifty-six locomotives were constructed in 1964/65. Continuing traffic losses resulted in the whole class becoming redundant by 1969. Fortuitously, a demand for high-powered diesels on the larger industrial railway systems saw the bulk of the locomotives finding useful employment for a further twenty years. This companion book to “Their Life on British Railways” provides an extensive appraisal of “Their Life in Industry” for the forty-eight locomotives which made the successful transition after withdrawal from BR in 1968/69. “Inside is the most extensive published work on Class 14s in industry with illustrations, tabulated data, complete dates and records, plus information and maps about the coal and steel sites at which they worked. Comprehensive.” —Trackside magazine “The amount of detail and level of research is impressive, and this series of books is invaluable for anyone interested in modern traction history.” —Railways Illustrated
The Metropolitan-Vickers Type 2 Co-Bo Diesel-Electric Locomotives
Author: Anthony P. Sayer
Publisher: Pen and Sword Transport
ISBN: 1526742829
Category : Transportation
Languages : en
Pages : 553
Book Description
A thorough history of the Metropolitan-Vickers locomotive, also known as “Class 28,” featuring 160 color and black & white photos. This book provides an in-depth history of the Metropolitan-Vickers diesel-electric Type 2 locomotives, more frequently known collectively as the “Co-Bo’s” due to their unusual wheel arrangement. Twenty locomotives were constructed during the late-1950s for use on the London Midland Region of British Railways. The fleet was fraught with difficulties from the start, most notably due to problems with their Crossley engines, this necessitating the need for extensive rehabilitation work during the early-1960s. Matters barely improved and the option to completely re-engine the locomotives with English Electric units was debated at length, but a downturn in traffic levels ultimately resulted in their demise by the end of 1968 prior to any further major rebuilding work being carried out. Significant quantities of new archive and personal sighting information, supported by over 180 photographs and diagrams, have been brought together to allow dramatic new insights into this enigmatic class of locomotives, including the whole debate surrounding potential re-engining, their works histories, the extended periods in storage, together with in-depth reviews of the various detail differences and liveries.
Publisher: Pen and Sword Transport
ISBN: 1526742829
Category : Transportation
Languages : en
Pages : 553
Book Description
A thorough history of the Metropolitan-Vickers locomotive, also known as “Class 28,” featuring 160 color and black & white photos. This book provides an in-depth history of the Metropolitan-Vickers diesel-electric Type 2 locomotives, more frequently known collectively as the “Co-Bo’s” due to their unusual wheel arrangement. Twenty locomotives were constructed during the late-1950s for use on the London Midland Region of British Railways. The fleet was fraught with difficulties from the start, most notably due to problems with their Crossley engines, this necessitating the need for extensive rehabilitation work during the early-1960s. Matters barely improved and the option to completely re-engine the locomotives with English Electric units was debated at length, but a downturn in traffic levels ultimately resulted in their demise by the end of 1968 prior to any further major rebuilding work being carried out. Significant quantities of new archive and personal sighting information, supported by over 180 photographs and diagrams, have been brought together to allow dramatic new insights into this enigmatic class of locomotives, including the whole debate surrounding potential re-engining, their works histories, the extended periods in storage, together with in-depth reviews of the various detail differences and liveries.
The Railway Magazine
British Rail in the 1980s and 1990s: Diesel Locomotives and DMUs
Author: Kenny Barclay
Publisher: Amberley Publishing Limited
ISBN: 1445670062
Category : Transportation
Languages : en
Pages : 199
Book Description
Kenny Barclay documents the diesel locomotives and DMUs in the closing decades of the British Rail era.
Publisher: Amberley Publishing Limited
ISBN: 1445670062
Category : Transportation
Languages : en
Pages : 199
Book Description
Kenny Barclay documents the diesel locomotives and DMUs in the closing decades of the British Rail era.
British Locomotives of the 20th Century
Author: Oswald Stevens Nock
Publisher:
ISBN:
Category : Transportation
Languages : en
Pages : 264
Book Description
Publisher:
ISBN:
Category : Transportation
Languages : en
Pages : 264
Book Description