Author: Herbert W. MishlerPublisher:
ISBN:
Category : Steel
Languages : en
Pages : 106
Book Description
Welding of High-strength Steels for Aircraft and Missile Applications
Author: Herbert W. MishlerPublisher:
ISBN:
Category : Steel
Languages : en
Pages : 106
Book Description
Welding High-strength Steels
Author: P. A. KammerPublisher:
ISBN:
Category : Martensitic stainless steel
Languages : en
Pages : 68
Book Description
Recent studies of the developments in welding steels with yield strengths greater than 150 ksi have included low-alloy martensitic steels, medium-alloy martensitic steels, nickel maraging steels, and bainitic steels. Only weldments from medium-alloy martensitic steels and nickel maraging steels have mechanical properties approaching those of the base plate without a complete postweld heat treatment. The most serious problem with the other steel is low toughness in the weld fusion zone. Adequate weld metal toughness under conditions of elastic strain can be obtarined over the entire 150 to 225 ksi yield-strength range only if the tungsten-arc welding process is used. Processes with higher deposition rates can produce comparable weld deposits only in the lower portion of the range. Above a yield strength of 200 ksi, 18Ni maraging steel weldments have the best combination of strength and toughness. Below 200 ksi, the HP 9-4-25 medium-alloy martensitic steel and 12Ni maraging steel weldments have nearly equal properties.
High-strength-steel Forgings
Author: H. J. HenningPublisher:
ISBN:
Category : Blacksmithing
Languages : en
Pages : 68
Book Description
THIS REPORT IS MAINLY CONCERNED WITH FORGINGS MADE FROM MARTENSITIC STEELS HEAT TREATED TO STRENGTHS RANGING FROM 240,000 TO 300,000 PSI. FORGING CHARACTERISTICS, DESIGN LIMITATIONS, DIMENSIONAL TOLERANCES, AND QUALITY-CONTROL PROBLEMS ARE DISCUSSED. A CONSIDERABLE AMOUNT OF DATA ON MECHANICAL PROPERTIES IS ALSO PRESENTED. IN ADDITION, THE REPORT SUMMARIZES THE AVAILABLE INFORMATION ON FORGED, SEMIAUSTENITIAL STEELS. THIS COMPILATION IS BASED ON PUBLISHED ARTICLES, GOVERNMENT REPORTS, AND INTERVIEWS WITH PRODUCERS AND USERS OF STEEL FORGINGS.
Availability and Mechanical Properties of High-strength Steel Extrusions
Author: Robert John FiorentinoPublisher:
ISBN:
Category : Steel
Languages : en
Pages : 66
Book Description
Control of Dimensions in High-strength Heat-treated Steel Parts
Author: A. R. ElseaPublisher:
ISBN:
Category : Steel
Languages : en
Pages : 52
Book Description
THE ACHIEVEMENT AND MAINTENANCE OF DESIRED DIMENSIONS IN COMPLEX, PRECISION-BUILT STRUCTURES, SUCH AS ROCKET-MOTOR CASES, ARE CRITICAL AND TECHNICALLY INVOLVED PROBLEMS. Their proper functioning demands close dimensional tolerances. Dimensional stability is extremely difficult toACHIEVE IN STEELS AT ULTRAHIGH STRENGTH LEVELS. The problem stems from interacting metallurgical factors which manifest themselves in volumetric and shape changes. The principal sources of size change are the changes in specific volume accompanying the phase transformations which occur in hardening and tempering. Distortion occurs when a part deforms in response to stress. The problem of dimensional instability is analyzed, the factors involved are discussed, and recommendations are made regarding the control of these factors. (Author).
Cracking in High-strength Steel Weldments
Author: P. A. KammerPublisher:
ISBN:
Category : Steel
Languages : en
Pages : 132
Book Description
Weldment cracking is a broad complex field. Even if one considers only cracking of steel weldments, the problems range from cracking at temperatures near the solidus during welding to cracking at room temperature days, weeks, or months after welding is completed. Numerous reports of investigations in this field are contained in the published and unpublished literature. However, most of these reports cover only a particular problem in a specific area of the broad field of weldment cracking. This review attempts to cover the major aspects of the entire field of weldment cracking. Necessarily, the review is for the most part general, only being specific in a few instances to illustrate a point. (Author).
The Engineering Properties of Columbium and Columbium Alloys
Author: F. F. SchmidtPublisher:
ISBN:
Category : Niobium
Languages : en
Pages : 264
Book Description
The results of a state-of-the-art survey covering niobium and 18 of its most promising alloys are presented. All data are given in tabular and graphical form covering some of the more important physical, mechanical, and metallurgical properties for each material. References are given at the conclusion of each material section.
A Guide to the Literature on High-velocity Metalworking
Author: D. E. StroheckerPublisher:
ISBN:
Category : Explosive hardening
Languages : en
Pages : 260
Book Description
This report is a guide to the literature on high-velocity metalworking. It consists primarily of abstracts of articles, reports, books, and current research projects on and related to high-velocity metalworking arranged according to technical subject. It covers a survey of the reported work in the field up to about October of 1962. Abstracts of over 700 references have been arranged by subject matter, with cross indexing between subjects. There is also an author index. The eleven major subjects and categories covered in the report are: (1) Energy Sources, (2) Energy Transfer Mediums, (3) Facility Requirements, (4) Tooling Requirements, (5) Equipment Requirements, (6) Forming, (7) Hardening, (8) Explosive Welding, (9) Powder Compaction, (10) Metal Removal, and (11) Material Behavior.
Summary of the Seventh Meeting of the Refractory Composites Working Group
Author: W. A. GibeautPublisher:
ISBN:
Category : Heat resistant alloys
Languages : en
Pages : 72
Book Description
This report summarizes information on refractory composites for use above 2500 F, as presented at the Seventh Meeting of the Refractory Composites Working Group, held March 12-14, 1963. Reports presented at the meeting were concerned with pro tective coatings, insulating ceramics, materials for rocket thrust chambers, dispersion strength ening of metals, joining of refractory materials, and testing techniques. Emphasis in the field of coatings for refractory metals has shifted from the rudiments of developing oxidation-resistant coatings to improvement and advanced evaluation of coatings to predict their utility for re-entry vehicles. (Author).
U.S. Government Metalworking Processes and Equipment Program
Author: F. C. HoldenPublisher:
ISBN:
Category : Alloys
Languages : en
Pages : 102
Book Description
A summary is given of the status of the various contracts involved in the U.S. Government's Metalworking Processes and Equipment Program. (Author).