Author: William C. FeistPublisher:
ISBN:
Category : Weathering
Languages : en
Pages : 24
Book Description
Weathering of Wood in Structural Uses
Author: William C. FeistPublisher:
ISBN:
Category : Weathering
Languages : en
Pages : 24
Book Description
Structural Design in Wood
Author: Judith StalnakerPublisher: Springer Science & Business Media
ISBN: 1461540828
Category : Technology & Engineering
Languages : en
Pages : 480
Book Description
The prime purpose of this book is to serve as a design is of considerable value in helping the classroom text for the engineering or architec student make the transition from the often sim ture student. It will, however, also be useful to plistic classroom exercises to problems of the designers who are already familiar with design real world. Problems for solution by the student in other materials (steel, concrete, masonry) but follow the same idea. The first problems in each need to strengthen, refresh, or update their capa subject are the usual textbook-type problems, bility to do structural design in wood. Design but in most chapters these are followed by prob principles for various structural materials are lems requiring the student to make structural similar, but there are significant differences. planning decisions as well. The student may be This book shows what they are. required, given a load source, to find the magni The book has features that the authors believe tude of the applied loads and decide upon a set it apart from other books on wood structural grade of wood. Given a floor plan, the student design. One of these is an abundance of solved may be required to determine a layout of struc examples. Another is its treatment of loads. This tural members. The authors have used most of book will show how actual member loads are the problems in their classes, so the problems computed. The authors have found that students, have been tested.
Structural Use of Wood in Adverse Environments
Author: Robert W. MeyerPublisher: Van Nostrand Reinhold Company
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 536
Book Description
Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Timber Decay in Buildings
Author: Brian RidoutPublisher: Taylor & Francis
ISBN: 1136739963
Category : Architecture
Languages : en
Pages : 272
Book Description
This is the first book to tackle all the issues relating to timber decay. It presents the facts and explores timber decay problems through case studies. These are illustrated with clear self-explanatory photographs for the reader to use as a diagnostic aid. Section 1 discusses timber as a living material, Section 2 deals with decay organisms and their habitat requirements. Section 3 moves on to the building as an environment for timber and discusses the ways in which wood responds to moisture change. Section 4 ends with an approach to timber decay which integrates knowledge on the decay organism, its requirements and natural predators with appropriate and targeted chemical treatments.
Handbook of Wood Chemistry and Wood Composites
Author: Roger M. RowellPublisher: CRC Press
ISBN: 1439853819
Category : Science
Languages : en
Pages : 703
Book Description
Wood has played a major role throughout human history. Strong and versatile, the earliest humans used wood to make shelters, cook food, construct tools, build boats, and make weapons. Recently, scientists, politicians, and economists have renewed their interest in wood because of its unique properties, aesthetics, availability, abundance, and perha
Coatings Materials and Surface Coatings
Author: Arthur A. TractonPublisher: CRC Press
ISBN: 1420044052
Category : Mathematics
Languages : en
Pages : 532
Book Description
Drawing from the third edition of The Coatings Technology Handbook, this text provides a detailed analysis of the raw materials used in the coatings, adhesives, paints, and inks industries. Coatings Materials and Surface Coatings contains chapters covering the latest polymers, carbon resins, and high-temperature materials used for coatings, adhesiv
Wood Properties and Processing
Author: Miha HumarPublisher: MDPI
ISBN: 3039288210
Category : Technology & Engineering
Languages : en
Pages : 350
Book Description
Wood-based materials are CO2-neutral, renewable, and considered to be environmentally friendly. The huge variety of wood species and wood-based composites allows a wide scope of creative and esthetic alternatives to materials with higher environmental impacts during production, use and disposal. Quality of wood is influenced by the genetic and environmental factors. One of the emerging uses of wood are building and construction applications. Modern building and construction practices would not be possible without use of wood or wood-based composites. The use of composites enables using wood of lower quality for the production of materials with engineered properties for specific target applications. Even more, the utilization of such reinforcing particles as carbon nanotubes and nanocellulose enables development of a new generation of composites with even better properties. The positive aspect of decomposability of waste wood can turn into the opposite when wood or wood-based materials are exposed to weathering, moisture oscillations, different discolorations, and degrading organisms. Protective measures are therefore unavoidable for many outdoor applications. Resistance of wood against different aging factors is always a combined effect of toxic or inhibiting ingredients on the one hand, and of structural, anatomical, or chemical ways of excluding moisture on the other.
Evaluation, Maintenance and Upgrading of Wood Structures
Author: Alan D'Yarmett FreasPublisher: ASCE Publications
ISBN: 9780784475768
Category : Technology & Engineering
Languages : en
Pages : 444
Book Description
Prepared by the Subcommittee on Evaluation, Maintenance, and Upgrading of Timber Structures of the Committee on Wood of the Structural Division of ASCE. This report presents information on technical aspects of inspection, evaluation, reinforcement, repair, and rehabilitation of timber structures. Any structure, regardless of the material from which it is made, may be subject to a review of its ability to perform a specific function or functions. This report reviews factors that influence the serviceability of wood structures, including loadings, duration of loads, temperature, moisture and weathering. Effects of chemicals and fire, as well as insects, fungi, and other organisms that attack wood are also covered. Designing to avoid problems caused by these factors is discussed. Inspection techniques and equipment are described, along with guidelines on where to look and what to look for. A section of evaluation of wood structures includes criteria such as structural analysis, determination of loads, and estimating load carrying capacity.
Guide for Use of Wood Preservatives in Historic Structures
Author: Stan LeBowPublisher: Government Printing Office
ISBN: 9780160915178
Category : Architecture
Languages : en
Pages : 68
Book Description
NOTE: NO FURTHER DISCOUNT FOR THIS PRINT PRODUCT-- OVERSTOCK SALE -- Significantly reduced list price Wood preservatives are generally grouped into two categories: preservatives used for in-place field (remedial)treatment and preservatives used for pressure treatments.A limitation of in-place treatments is that they cannot beforced deeply into the wood under pressure. However, theycan be applied into the center of large wooden membersvia treatment holes. These preservatives may be availableas liquids, rods, or pastes. Pressure-treated wood has muchdeeper and more uniform preservative penetration thanwood treated with other methods. The type of pressuretreated wood is often dependent on the requirements of thespecific application. To guide selection of pressure-treatedwood, the American Wood Protection Association developedUse Category System standards. Other preservative characteristics, such as color, odor, and surface oiliness may alsobe relevant. Guidelines for selection and application of fieldtreatments and for selection and specification of pressure-treated wood are provided in this document. Related Products: Nondestructive Evaluation of Wood is available here: https: //bookstore.gpo.gov/products/sku/001-001-00704-8 New Exterior Additions to Historic Buildings: Preservation Concerns is available here: https: //bookstore.gpo.gov/products/sku/024-005-01280-0 Guide for In-Place Treatment of Wood in Historic Covered and Modern Bridges is available here: https: //bookstore.gpo.gov/products/sku/001-001-00695-5 Preserving Historic Wood Porches is available here: https: //bookstore.gpo.gov/products/sku/024-005-01240-1 Preservation Briefs: Recognizing and Resolving Common Preservation Problems, 1-14 is available here: https: //bookstore.gpo.gov/products/sku/024-005-01026-2 Preservation Briefs: 15-23 (2007) is avaiable here: https: //bookstore.gpo.gov/products/sku/024-005-01256-7 Preservation Briefs 24-34: Recognizing and Resolving Common Preservation and Repair Problems Prior to Working on Historic Buildings is available here: https: //bookstore.gpo.gov/products/sku/024-005-01147-1 Preservation Briefs 35-42: Recognizing and Resolving Common Preservation and Repair Problems Prior to Working on Historic Buildings is available here: https: //bookstore.gpo.gov/products/sku/024-005-01219-2 Renovation & Historic Preservation resources collection can be found here: https: //bookstore.gpo.gov/catalog/science-technology/construction-archit"
Author: