A Surface Performance-graded (SPG) Specification for Surface Treatment Binders PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download A Surface Performance-graded (SPG) Specification for Surface Treatment Binders PDF full book. Access full book title A Surface Performance-graded (SPG) Specification for Surface Treatment Binders by Lubinda F. Walubita. Download full books in PDF and EPUB format.
Author: Lubinda F. Walubita Publisher: ISBN: Category : Binders (Materials) Languages : en Pages : 138
Book Description
Presently, surface treatment design and material selection is based on traditional specifications and experience, which are not performance-based and sometimes result in inadequate performance of the surface treatment. In 2000 the first phase of a Texas Department of Transportation (TxDOT) research project developed a surface performance-graded (SPG) specification for the selection of surface treatment binders (Research Report 1710-1). The SPG specification is performance-based and utilizes binder properties directly related to surface treatment performance and associated distress. The specification takes into account environmental conditions, aging effects of the binder, visco-elastic behavior, and reliability. The objective of this second phase of the project was to investigate and establish the validity and applicability of the proposed SPG specification, make modifications where necessary, and, finally, recommend the SPG specification for practical implementation. The research methodology involved highway section identification, laboratory testing including SPG grading, performance monitoring, and comparison of the SPG binder grades to actual field performance. Factors included in the experimental design were binder type and suppliers, environment, aggregates, and traffic. Analyses of the results showed that there is generally a good correlation between the proposed SPG specification and actual field performance. Overall, the results are indicative that the SPG specification is functional and if properly applied, the specification promises to be a relatively cost-effective method for selecting binders to ensure adequate surface treatment performance. However, further validation is recommended, possibly with controlled test sections to fully investigate the effects of design, construction, and quality control processes and address some of the deficiencies of the specification.
Author: Lubinda F. Walubita Publisher: ISBN: Category : Binders (Materials) Languages : en Pages : 138
Book Description
Presently, surface treatment design and material selection is based on traditional specifications and experience, which are not performance-based and sometimes result in inadequate performance of the surface treatment. In 2000 the first phase of a Texas Department of Transportation (TxDOT) research project developed a surface performance-graded (SPG) specification for the selection of surface treatment binders (Research Report 1710-1). The SPG specification is performance-based and utilizes binder properties directly related to surface treatment performance and associated distress. The specification takes into account environmental conditions, aging effects of the binder, visco-elastic behavior, and reliability. The objective of this second phase of the project was to investigate and establish the validity and applicability of the proposed SPG specification, make modifications where necessary, and, finally, recommend the SPG specification for practical implementation. The research methodology involved highway section identification, laboratory testing including SPG grading, performance monitoring, and comparison of the SPG binder grades to actual field performance. Factors included in the experimental design were binder type and suppliers, environment, aggregates, and traffic. Analyses of the results showed that there is generally a good correlation between the proposed SPG specification and actual field performance. Overall, the results are indicative that the SPG specification is functional and if properly applied, the specification promises to be a relatively cost-effective method for selecting binders to ensure adequate surface treatment performance. However, further validation is recommended, possibly with controlled test sections to fully investigate the effects of design, construction, and quality control processes and address some of the deficiencies of the specification.
Author: Aishwarya Vijaykumar Publisher: ISBN: Category : Languages : en Pages :
Book Description
The design and selection of surface treatment binders in service is currently based on specifications that only account for the penetration and ductility of emulsion residues or the penetration and viscosity of hot-applied asphalt cements. These specifications consider neither the entire range of temperatures that the binders may be subjected to during production and in service, nor long-term aging behavior. A surface performance-graded (SPG) specification for the selection of surface treatment binders was developed as part of previous Texas Department of Transportation (TxDOT) and National Cooperative Highway Research Program (NCHRP) projects. The work performed under the TxDOT Project 0-6616 was the basis for this thesis. In this project, the SPG specification, which is performance-based and takes into account the physical properties of the binder at the temperature ranges in which the material will be used, was further validated. This was accomplished by standardizing the emulsion residue recovery method through the evaluation of two warm oven methods, exploring the exclusive use of the dynamic shear rheometer (DSR) for determining performance-based properties, and further field validating the thresholds for these properties. The laboratory and field results were used to revise the SPG specification for surface treatment binders in service. Binder samples collected from chip seal projects constructed on selected highway sections in Texas in summer 2011 were tested and graded according to the existing SPG specification developed in previous research projects. Two warm oven emulsion residue recovery methods were used and compared. New DSR tests, including the multiple stress creep recovery (MSCR) test and the frequency sweep test were evaluated for developing additional criteria in the SPG specification. The SPG grades of the surface binder samples evaluated from laboratory tests were compared with the actual field performance of the highway sections one year after construction. The SPG specification was found to be functional in terms of enabling the selection of binders to ensure adequate surface treatment performance. Moreover, the results obtained from the MSCR and DSR frequency sweep tests were compared with field performance to develop additional criteria in the specification. Further validation is recommended to investigate the effects of construction and quality control processes, as this study is limited to producing a revised SPG specification for properties that address stiffness and aggregate retention in service.
Author: Scott Shuler Publisher: Transportation Research Board ISBN: 0309155398 Category : Technology & Engineering Languages : en Pages : 111
Book Description
TRB's National Cooperative Highway Research Program (NCHRP) Report 680: Manual for Emulsion-Based Chip Seals for Pavement Preservation examines factors affecting chip performance, highlights design and construction considerations, and explores procedures for selecting the appropriate chip seal materials. The report also contains suggested test methods for use in the design and quality control of chip seals. Appendices A to J of NCHRP Report 680 provide further elaboration on the work performed in this project--
Author: Publisher: ISBN: Category : Bridges Languages : en Pages : 126
Book Description
"TRB's Transportation Research Record: Journal of the Transportation Research Board, No. 2360 contains 10 papers that study holistic approaches to maintenance and preservation of transportation infrastructure; guidelines for thermographic inspection of concrete bridge components in shaded conditions; bridge preservation by action type; fatigue testing and structural health monitoring of retrofitted web stiffeners on steel highway bridges; and, vulnerability of bridges exposed to scour. This issue also examines performance measures for bridge preservation; risk modeling of advanced deterioration in bridge management systems; modeling hurricane hazards and damage on Florida bridges; developing bridge management components that facilitate decision making; and, a method to assess bonding characteristics of membrane layers in wearing course on orthotropic steel bridge decks."--Pub. online blurb.
Author: Aishwarya Vijaykumar Publisher: ISBN: Category : Pavements Languages : en Pages : 112
Book Description
The design and selection of surface treatment binders in service is currently based on specifications that include tests of emulsion residues or hot-applied asphalt cements at standard temperatures that do not cover the entire range of in service temperatures, measure properties that are not performance-related, and do not consider representative aging conditions for the critical first year. Current specifications for these binders consider properties of the material during both construction and in service, and a wide range of materials can be utilized to meet the current specified properties. A surface performance-graded (SPG) specification for the evaluation and selection of chip seal binders which addressed these shortcomings was developed as part of previous Texas Department of Transportation (TxDOT) and National Cooperative Highway Research Program (NCHRP) research projects. In the current study, the SPG specification was revised and further validated. This was accomplished by standardizing the emulsion residue recovery method through the evaluation of two warm oven methods, exploring the exclusive use of the dynamic shear rheometer (DSR) for determining performance-related properties, and further field validating the thresholds for these properties. The laboratory and field results were used to revise the SPG specification for surface treatment binders in service. Moreover, the results obtained from the multiple stress creep recovery and DSR frequency sweep tests were compared with field performance to evaluate additional criteria for the specification. This study is limited to producing a revised SPG specification for performance-related properties that address aggregate retention and bleeding in service. The effects of construction and quality control processes are beyond the scope of this study sponsored by TxDOT, and additional specifications are needed for use in conjunction with the SPG specification to address these issues and ensure adequate performance.
Author: Robert L. Lytton Publisher: Strategic Highway Research Program (Shrp) ISBN: 9780309056175 Category : Asphalt concrete Languages : en Pages : 500
Book Description
A result of the Strategic Highway Research Program's asphalt research is the development of performance-based specifications for asphalt binders and mixtures to control 3 distress modes: rutting; fatigue cracking; and thermal cracking. The SHRP A-005 project developed detailed pavement performance models to support these binder and mixture specifications and performance-based mixture designs. This report documents the findings of this extensive research effort and provides supporting data for the performance-based specifications and mixture design procedure called SUPERPAVE. The A-005 contract developed and used a sophisticated, mechanistic-based pavement performance model to define the relationships between asphalt binder and mixture properties and pavement distress. A comprehensive pavement performance model was developed that predicts the amount of fatigue cracking, thermal cracking and rutting in asphalt concrete pavements with time, using results from the accelerated laboratory tests. The pavement performance models for each distress were also used to confirm the relevant binder and mixture properties established by other SHRP contractors. The model has 3 parts: a mixture evaluation model; a pavement response model; and a pavement distress model.
Author: Xueyan Liu Publisher: CRC Press ISBN: 1000533360 Category : Technology & Engineering Languages : en Pages : 1727
Book Description
Green and Intelligent Technologies for Sustainable and Smart Asphalt Pavements contains 124 papers from 14 different countries which were presented at the 5th International Symposium on Frontiers of Road and Airport Engineering (IFRAE 2021, Delft, the Netherlands, 12-14 July 2021). The contributions focus on research in the areas of "Circular, Sustainable and Smart Airport and Highway Pavement" and collects the state-of-the-art and state-of-practice areas of long-life and circular materials for sustainable, cost-effective smart airport and highway pavement design and construction. The main areas covered by the book include: • Green and sustainable pavement materials • Recycling technology • Warm & cold mix asphalt materials • Functional pavement design • Self-healing pavement materials • Eco-efficiency pavement materials • Pavement preservation, maintenance and rehabilitation • Smart pavement materials and structures • Safety technology for smart roads • Pavement monitoring and big data analysis • Role of transportation engineering in future pavements Green and Intelligent Technologies for Sustainable and Smart Asphalt Pavements aims at researchers, practitioners, and administrators interested in new materials and innovative technologies for achieving sustainable and renewable pavement materials and design methods, and for those involved or working in the broader field of pavement engineering.
Author: Lubinda F. Walubita
Author: Lubinda F. Walubita
Author: Aishwarya Vijaykumar
Author: 
Author: Scott Shuler
Author: 
Author: Aishwarya Vijaykumar
Author: Ramon Bonaquist
Author: 
Author: Robert L. Lytton
Author: Xueyan Liu