Using Exhaust Gas Recirculation (EGR) in Spark-ignition Engines to Lower NOx Emissions and Improve Fuel Consumption PDF Download

Author: Patrick Glenn Szymkowicz
Publisher:
ISBN:
Category : Automobiles
Languages : en
Pages : 150

View

Book Description

Author: Rajeshkumar Ghanshyambhai Shyani
Publisher:
ISBN:
Category :
Languages : en
Pages :

View

Book Description
The exhaust gas recirculation (EGR) system has been widely used to reduce nitrogen oxide (NOx) emission, improve fuel economy and suppress knock by using the characteristics of charge dilution. However, previous studies have shown that as the EGR rate at a given engine operating condition increases, the combustion instability increases. The combustion instability increases cyclic variations resulting in the deterioration of engine performance and increasing hydrocarbon emissions. Therefore, the optimum EGR rate should be carefully determined in order to obtain the better engine performance and emissions. A thermodynamic cycle simulation of the four-stroke spark-ignition engine was used to determine the effects of EGR on engine performance, emission characteristics and second law parameters, considering combustion instability issues as EGR level increases. A parameter, called 'Fuel Fraction Burned, ' was introduced as a function of the EGR percentage and used in the simulation to incorporate the combustion instability effects. A comprehensive parametric investigation was conducted to examine the effects of variations in EGR, load and speed for a 5.7 liter spark-ignition automotive engine. Variations in the thermal efficiencies, brake specific NOx emissions, average combustion temperature, mean exhaust temperature, maximum temperature and relative heat transfer as functions of exhaust gas recycle were determined for both cooled and adiabatic EGR configurations. Also effects of variations in the load and speed on thermal efficiencies, relative heat transfers and destruction of availability due to combustion were determined for 0% EGR and 20% EGR cases with both cooled and adiabatic configurations. For both EGR configurations, thermal efficiencies first increase, reach a maximum at about 16% EGR and then decrease as the EGR level increases. Thermal efficiencies are slightly higher for cooled EGR configuration than that for adiabatic configuration. Concentration of nitric oxide emissions decreases from about 2950 ppm to 200 ppm as EGR level increases from 0% to 20% for cooled EGR configuration. The cooled EGR configuration results in lower nitric oxide emissions relative to the adiabatic EGR configuration. Also second law parameters show the expected trends as functions of EGR. Brake thermal efficiency is higher for the 20% EGR case than that for the no EGR case over the range of load (0 to WOT) and speed (600 rpm to 6000 rpm). Predictions made from the simulation were compared with some of the available experimental results. Predicted thermal efficiencies showed a similar trend when compared to the available experimental data. Also, percentage of unused fuel availability increases as the EGR level increases, and it can be seen as one of the effects of deteriorating combustion quality as the EGR level increases.

Author: B. Ashok
Publisher: Elsevier
ISBN: 0128242280
Category : Technology & Engineering
Languages : en
Pages : 488

View

Book Description
NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines: Approaches Toward NOx Free Automobiles presents the fundamental theory of emission formation, particularly the oxides of nitrogen (NOx) and its chemical reactions and control techniques. The book provides a simplified framework for technical literature on NOx reduction strategies in IC engines, highlighting thermodynamics, combustion science, automotive emissions and environmental pollution control. Sections cover the toxicity and roots of emissions for both SI and CI engines and the formation of various emissions such as CO, SO2, HC, NOx, soot, and PM from internal combustion engines, along with various methods of NOx formation. Topics cover the combustion process, engine design parameters, and the application of exhaust gas recirculation for NOx reduction, making this book ideal for researchers and students in automotive, mechanical, mechatronics and chemical engineering students working in the field of emission control techniques. Covers advanced and recent technologies and emerging new trends in NOx reduction for emission control Highlights the effects of exhaust gas recirculation (EGR) on engine performance parameters Discusses emission norms such as EURO VI and Bharat stage VI in reducing global air pollution due to engine emissions

Author: Fred Schäfer
Publisher: Springer Science & Business Media
ISBN: 370913806X
Category : Technology & Engineering
Languages : en
Pages : 205

View

Book Description
Over the last several years, there has been much discussion on the interrelation of CO2 emissions with the global warming phenomenon. This in turn has increased pressure to develop and produce more fuel efficient engines and vehicles. This is the central topic of this book. It covers the underlying processes which cause pollutant emissions and the possibilities of reducing them, as well as the fuel consumption of gasoline and diesel engines, including direct injection diesel engines. As well as the engine-related causes of pollution, which is found in the raw exhaust, there is also a description of systems and methods for exhaust post treatment. The significant influence of fuels and lubricants (both conventional and alternative fuels) on emission behavior is also covered. In addition to the conventional gasoline and diesel engines, lean-burn and direct injection gasoline engines and two-stroke gasoline and diesel engines are included. The potential for reducing fuel consumption and pollution is described as well as the related reduction of CO2 emissions. Finally, a detailed summary of the most important laws and regulations pertaining to pollutant emissions and consumption limits is presented. This book is intended for practising engineers involved in research and applied sciences as well as for interested engineering students.

Author: Donald A. Hurter
Publisher:
ISBN:
Category : Automobiles
Languages : en
Pages : 242

View

Book Description

Author: Arthur D. Little, Inc
Publisher:
ISBN:
Category : Automobiles
Languages : en
Pages : 248

View

Book Description

Author: Donald A. Hurter
Publisher:
ISBN:
Category : Automobiles
Languages : en
Pages : 774

View

Book Description

Author: Zainal Ambri Abdul Karim
Publisher: Springer
ISBN: 9811077541
Category : Technology & Engineering
Languages : en
Pages : 88

View

Book Description
This book examines the development and utilization of alternative fuels in order to reduce or control the environmental impact of internal combustion engine exhaust gases. Discussing alternative fuels such as dual fuel techniques, rubber seed/palm oil biodiesel, syngas dual-fuelling, water-in-diesel emulsions and gasification of date palm seeds, it is a valuable resource for researchers in the field of engine development and on alternative fuels.

Author: Janusz Przastek
Publisher:
ISBN:
Category : Automobiles
Languages : en
Pages : 16

View

Book Description
"This paper presents electronically controlled ignition system with exhaust gas recirculation (EGR) in two-cylinder, four-stroke SI research engine. Exhaust gas recirculation was achieved by the special spark plugs enabling flow of exhaust gases between cylinders." -- Abstract.

Author: United States. Congress. Senate. Committee on Commerce. Special Subcommittee on Science, Technology, and Commerce
Publisher:
ISBN:
Category : Automobile industry and trade
Languages : en
Pages : 184

View

Book Description