Author: American Society of Mechanical Engineers. Winter Annual MeetingPublisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 118
Book Description
Thermal Modeling and Design of Electronic Systems and Devices
Author: American Society of Mechanical Engineers. Winter Annual MeetingPublisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 118
Book Description
Thermal Modeling and Design of Electronic Systems and Devices
Author: American Society of Mechanical Engineers. Winter MeetingPublisher:
ISBN: 9780791805862
Category : Electronic apparatus and appliances
Languages : en
Pages : 101
Book Description
Advances in Thermal Modeling of Electronic Components and Systems
Author: Advances in Thermal Modeling of Electronic Components and Systems
Author: Avram Bar CohenPublisher: Advances in Thermal Modeling o
ISBN: 9780791800652
Category : Technology & Engineering
Languages : en
Pages : 459
Book Description
This volume of the series focuses on air cooling technology. Begins with a review of techniques used in thermal analysis of natural convection electronic systems, and continues with the presentation of a methodology for thermal modeling of air cooled components mounted on printed circuit boards. Gov
Thermal Design of Electronic Equipment
Author: Ralph RemsburgPublisher: CRC Press
ISBN: 142004236X
Category : Technology & Engineering
Languages : en
Pages : 395
Book Description
In a field where change and growth is inevitable, new electronic packaging problems continually arise. Smaller, more powerful devices are prone to overheating, causing intermittent system failures, corrupted signals, lower MTBF, and outright system failure. Since convection cooling is the heat transfer path most engineers take to deal with thermal problems, it is appropriate to gain as much understanding about the underlying mechanisms of fluid motion as possible. Thermal Design of Electronic Equipment is the only book that specifically targets the formulas used by electronic packaging and thermal engineers. It presents heat transfer equations dealing with polyalphaolephin (PAO), silicone oils, perfluorocarbons, and silicate ester-based liquids. Instead of relying on theoretical expressions and text explanations, the author presents empirical formulas and practical techniques that allow you to quickly solve nearly any thermal engineering problem in electronic packaging.
Design and Analysis of Heat Sinks
Author: Allan D. KrausPublisher: Wiley-Interscience
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 432
Book Description
A powerful methodology for producing superior thermal performance at low cost with minimum added mass . . . Here is the only available comprehensive treatment of the design and analysis of heat sinks. It provides all the theoretical and practical information necessary to successfully design and/or select cost-effective heat sinks for electronic equipment. The presentation includes detailed explanations of the governing heat transfer phenomena, complete coverage of thermal modeling tools for geometrically complex fin structures, and extensive discussion on recognizing thermal optimization opportunities. Other topics covered include: Fundamentals of heat transfer Thermal modeling of electronic packages Mathematical tools for heat-sink analysis and design Prevailing thermal transport processes Models for a variety of fin geometries Simple "transfer function" relations for single fin, cascaded fin, and fin array heat sinks Thermal characterization and optimization of plate-fin heat sinks Completely self-contained and filled with valuable information not available from any other single source, Design and Analysis of Heat Sinks is both a superior reference for accomplished thermal specialists and an excellent textbook for graduate courses in advanced thermal applications for mechanical engineering students. This book can also serve as a text in thermal science for students of electrical engineering.
Transient Electro-Thermal Modeling on Power Semiconductor Devices
Author: Tanya Kirilova GachovskaPublisher: Springer Nature
ISBN: 3031025067
Category : Technology & Engineering
Languages : en
Pages : 68
Book Description
This book presents physics-based electro-thermal models of bipolar power semiconductor devices including their packages, and describes their implementation in MATLAB and Simulink. It is a continuation of our first book Modeling of Bipolar Power Semiconductor Devices. The device electrical models are developed by subdividing the devices into different regions and the operations in each region, along with the interactions at the interfaces, are analyzed using the basic semiconductor physics equations that govern device behavior. The Fourier series solution is used to solve the ambipolar diffusion equation in the lightly doped drift region of the devices. In addition to the external electrical characteristics, internal physical and electrical information, such as junction voltages and carrier distribution in different regions of the device, can be obtained using the models. The instantaneous dissipated power, calculated using the electrical device models, serves as input to the thermal model (RC network with constant and nonconstant thermal resistance and thermal heat capacity, or Fourier thermal model) of the entire module or package, which computes the junction temperature of the device. Once an updated junction temperature is calculated, the temperature-dependent semiconductor material parameters are re-calculated and used with the device electrical model in the next time-step of the simulation. The physics-based electro-thermal models can be used for optimizing device and package design and also for validating extracted parameters of the devices. The thermal model can be used alone for monitoring the junction temperature of a power semiconductor device, and the resulting simulation results used as an indicator of the health and reliability of the semiconductor power device.
Thermal Management of Electronic Systems II
Author: E. BeynePublisher: Springer Science & Business Media
ISBN: 9401155062
Category : Technology & Engineering
Languages : en
Pages : 358
Book Description
For the second time, the Eurotherm Committee has chosen Thermal Managment of Electronic Systems as the subject for its 45th Seminar, held at IMEC in Leuven, Belgium, from 20 to 22 September 1995. After the successfui first edition of this seminar in Delft, June 14-16, 1993, it was decided to repeat this event on a two year basis. This volume constitutes the edited proceedings of the Seminar. Thermal management of electronic systems is gaining importance. Whereas a few years ago papers on this subject where mainly devoted to applications in high end markets, such as mainframes and telecommunication switching equipment, we see a growing importance in the "lower" end applications. This may be understood from the growing impact of electronics on every day life, from car electronics, GSM phones, personal computers to electronic games. These applications add new requirements to the thermal design. The thermal problem and the applicable cooling strategies are quite different from those in high end products. In this seminar the latest developments in many of the different aspects of the thermal design of electronic systems were discussed. Particular attention was given to thermal modelling, experimental characterisation and the impact of thermal design on the reliability of electronic systems.
Thermal and Electro-Thermal System Simulation
Author: Márta RenczPublisher: MDPI
ISBN: 3039217364
Category : Technology & Engineering
Languages : en
Pages : 222
Book Description
With increasing power levels and power densities in electronics systems, thermal issues are becoming more and more critical. The elevated temperatures result in changing electrical system parameters, changing the operation of devices, and sometimes even the destruction of devices. To prevent this, the thermal behavior has to be considered in the design phase. This can be done with thermal end electro-thermal design and simulation tools. This Special Issue of Energies, edited by two well-known experts of the field, Prof. Marta Rencz, Budapest University of Technology and Economics, and by Prof. Lorenzo Codecasa, Politecnico di Milano, collects twelve papers carefully selected for the representation of the latest results in thermal and electro-thermal system simulation. These contributions present a good survey of the latest results in one of the most topical areas in the field of electronics: The thermal and electro-thermal simulation of electronic components and systems. Several papers of this issue are extended versions of papers presented at the THERMINIC 2018 Workshop, held in Stockholm in the fall of 2018. The papers presented here deal with modeling and simulation of state-of-the-art applications that are highly critical from the thermal point of view, and around which there is great research activity in both industry and academia. Contributions covered the thermal simulation of electronic packages, electro-thermal advanced modeling in power electronics, multi-physics modeling and simulation of LEDs, and the characterization of interface materials, among other subjects.
Thermal Management for Opto-electronics Packaging and Applications
Author: Xiaobing LuoPublisher: John Wiley & Sons
ISBN: 1119179270
Category : Technology & Engineering
Languages : en
Pages : 373
Book Description
Thermal Management for Opto-electronics Packaging and Applications A systematic guide to the theory, applications, and design of thermal management for LED packaging In Thermal Management for Opto-electronics Packaging and Applications, a team of distinguished engineers and researchers deliver an authoritative discussion of the fundamental theory and practical design required for LED product development. Readers will get a solid grounding in thermal management strategies and find up-to-date coverage of heat transfer fundamentals, thermal modeling, and thermal simulation and design. The authors explain cooling technologies and testing techniques that will help the reader evaluate device performance and accelerate the design and manufacturing cycle. In this all-inclusive guide to LED package thermal management, the book provides the latest advances in thermal engineering design and opto-electronic devices and systems. The book also includes: A thorough introduction to thermal conduction and solutions, including discussions of thermal resistance and high thermal conductivity materials Comprehensive explorations of thermal radiation and solutions, including angular- and spectra-regulation radiative cooling Practical discussions of thermally enhanced thermal interfacial materials (TIMs) Complete treatments of hybrid thermal management in downhole devices Perfect for engineers, researchers, and industry professionals in the fields of LED packaging and heat transfer, Thermal Management for Opto-electronics Packaging and Applications will also benefit advanced students focusing on the design of LED product design.