Thermal Gradients in Southwestern United States and the Effect on Bridge Bearing Loads PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Thermal Gradients in Southwestern United States and the Effect on Bridge Bearing Loads PDF full book. Access full book title Thermal Gradients in Southwestern United States and the Effect on Bridge Bearing Loads by Leanne White. Download full books in PDF and EPUB format.
Author: Leanne White Publisher: ISBN: Category : Concrete Languages : en Pages : 110
Book Description
"Thermal gradients became a component of bridge design after soffit cracking in prestressed concrete bridges was attributed to nonlinear temperature distribution through the depth of the bridge. While the effect of thermal gradient on stress distributions has been previously investigated in concrete bridges, less research has been done investigating the effect on bearing loads. The climate condition of the southwestern portion of the United States may cause larger thermal gradients than recommended by AASHTO LRFD Bridge Design Specifications. The main objective of this study was to evaluate the effect of thermal gradients in the southwestern region of the United States on bearing design. This study consisted of two parts, heat flow analysis using long-term meteorological data and two case study bridges in Nevada analyzed for bearing loadings including several variations of thermal gradient loading. One bridge was a two-span concrete posttensioned box girder bridge in Las Vegas, the second bridge was a two-span composite steel girder bridge in Reno. [...] Variation of constant temperature through the steel girder influenced both longitudinal and transverse loading. Reducing the temperature through the girder maximized bending moment and support reactions, while unaltered temperature through the girder maximized individual bearing loads. Thus, it is uncertain whether constant temperature through girder should be included."--Abstract
Author: Leanne White Publisher: ISBN: Category : Concrete Languages : en Pages : 110
Book Description
"Thermal gradients became a component of bridge design after soffit cracking in prestressed concrete bridges was attributed to nonlinear temperature distribution through the depth of the bridge. While the effect of thermal gradient on stress distributions has been previously investigated in concrete bridges, less research has been done investigating the effect on bearing loads. The climate condition of the southwestern portion of the United States may cause larger thermal gradients than recommended by AASHTO LRFD Bridge Design Specifications. The main objective of this study was to evaluate the effect of thermal gradients in the southwestern region of the United States on bearing design. This study consisted of two parts, heat flow analysis using long-term meteorological data and two case study bridges in Nevada analyzed for bearing loadings including several variations of thermal gradient loading. One bridge was a two-span concrete posttensioned box girder bridge in Las Vegas, the second bridge was a two-span composite steel girder bridge in Reno. [...] Variation of constant temperature through the steel girder influenced both longitudinal and transverse loading. Reducing the temperature through the girder maximized bending moment and support reactions, while unaltered temperature through the girder maximized individual bearing loads. Thus, it is uncertain whether constant temperature through girder should be included."--Abstract
Author: Quan Chen Publisher: ISBN: Category : Iron and steel bridges Languages : en Pages : 758
Book Description
The effects of thermal loads on steel bridges are not well understood. Although thermal effects are discussed in the AASHTO specifications, the appropriateness of the recommended thermal gradients is questionable. Thermal effects on the bridges can impact the design of the steel superstructure, the support bearings, and even the bridge piers. Previous field monitoring of steel trapezoidal box girder bridges has shown that thermal stresses on the order of "5 ksi were not uncommon under regular daily thermal cycles. Stresses induced during annual thermal cycles may be potentially larger than those during daily thermal cycles. Recent data has shown that the bearings that are to allow the girders to expand and contract freely due to thermal movements are not frictionless. Because of the bearing friction, the supporting piers must flex to accommodate the bridge movements. In curved girder applications, questions have been raised by designers and contractors regarding the proper orientation of guided bearings. This research study includes field measurements, laboratory tests and finite element parametric analyses. The bearings of nine bridges in the Houston area have been instrumented and monitored for more than a year to measure bearing movements due to changes in temperature. Instrumentation of the steel girders on one of the Houston bridges was made utilizing thermocouples and vibrating wire strain gages to measure temperature distribution and thermal stresses. In addition, strain gages and thermal couples were applied to the steel girders and concrete bridge deck on a simple twin box girder bridge located at the Ferguson Structural Engineering Laboratory in Austin, Texas. The data from the field monitoring and laboratory tests were used to validate a finite element model. Based on this model, a detailed parametric study was conducted to investigate the effects of bridge configuration. It is found that under the given weather conditions, the most critical thermal loads are achieved under the following bridge configurations: N-S bridge orientation, shorter lengths of the concrete deck overhang, deeper steel girder webs, thinner concrete decks, and larger spacing between two box girders. To evaluate the effect of environmental conditions and obtain extreme thermal loads for design purposes, the most critical configuration of bridge sections was modeled for thermal analysis with Texas weather data from 1961 to 2005 as the input environmental conditions. Four cities were considered to bound Texas weather conditions. Based on the thermal analyses, a 45-year sample data of thermal parameters were used to describe the temperature field over a section. Extreme value analyses of the sample data were performed to obtain the relationship between thermal loads and return periods. The thermal loads with 100-year return period were compared to the ones suggested by AASHTO. The thermal loads with 100-year return period were used to investigate structural response. The effect of bearing orientation and the point of fixity were studied. A rigid body model was proposed to estimate thermal movements at the ends, which matched those obtained from field monitoring and finite element analysis. The maximum possible thermal stresses were also evaluated. Design suggestions are put forward based on the analysis.
Author: Ryan Michael Hagedorn Publisher: ISBN: Category : Bridges Languages : en Pages : 152
Book Description
Climate change and its effect on weather in the United States is a well-documented phenomenon. In particular, extreme heat waves have become more intense, more frequent, and longer lasting, especially in the southern United States. As with much of America's transportation infrastructure, prestressed concrete bridge girders experience the effects of these heat waves. Uneven heating of optimized bridge girder sections results in large non-linear temperature gradients. In this study, temperature was monitored in three different AASHTO I-girders to determine the vertical and transverse temperature gradients in a pre-deck placement condition. It was determined that the current design standard, which uses a non-linear vertical thermal gradient, was inaccurate in both shape and magnitude for girders Type IV and smaller in this condition. Transverse gradients were also recommended as none are included in design standards. Using three dimensional modeling, this study also sought to understand the response of the girders to non-linear temperature gradients and if they should be accounted for in girder design.
Author: Joseph Paul Leidy Publisher: ISBN: Category : Traffic flow Languages : en Pages : 108
Book Description
Axle load and gross-vehicle weight characteristics of Mexican-origin commercial trucks processed through the U.S. Customs yard in the city of Laredo, Texas, are described in this report. Investigation of these characteristics particular to Mexican-origin trucks is directed by a Texas Department of Transportation (TxDOT)-sponsored study entitled "Multi-Modal Planning and the U.S.-Mexico Free Trade Agreement" as a prerequisite to evaluating the potential damage to Texas highways posed by international trade traffic. Justifiable concern exists not just with the increasing volume of trade-related truck traffic, but also with the loads carried by Mexican-origin trucks. This study is facilitated by the installation of a weigh-in-motion (WIM) system at the preeminent Southwestern commercial truck port-of-entry (Laredo). Load summaries are presented on five basic truck classes (by axle count) and are based on the original Association of American State Highway and Transportation Officials (AASHTO) pavement damage relationships.
Author: Hyun-Moo Koh Publisher: CRC Press ISBN: 1439828431 Category : Technology & Engineering Languages : en Pages : 780
Book Description
Collection of 550 revised, state-of-the art contributions on most recent advances in bridge maintenance, safety, management and life-cycle performance from leading experts in this area.
Author: Rishi Gupta Publisher: Springer Nature ISBN: 3031341597 Category : Technology & Engineering Languages : en Pages : 1180
Book Description
This book comprises the proceedings of the Annual Conference of the Canadian Society of Civil Engineering 2022. The contents of this volume focus on specialty conferences in construction, environmental, hydrotechnical, materials, structures, transportation engineering, etc. This volume will prove a valuable resource for those in academia and industry.
Author: Leanne White
Author: Leanne White
Author: Quan Chen
Author: Ryan Michael Hagedorn
Author: Joseph Paul Leidy
Author: Hyun-Moo Koh
Author: Rishi Gupta
Author: Dennis Wade Watson
Author: John F. Stanton
Author: National Research Council (U.S.). Transportation Research Board
Author: