Thermal Design and Thermal Behaviour of Radio Telescopes and their Enclosures PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Thermal Design and Thermal Behaviour of Radio Telescopes and their Enclosures PDF full book. Access full book title Thermal Design and Thermal Behaviour of Radio Telescopes and their Enclosures by Albert Greve. Download full books in PDF and EPUB format.
Author: Albert Greve Publisher: Springer Science & Business Media ISBN: 3642038670 Category : Science Languages : en Pages : 409
Book Description
Radio telescopes as well as communication antennas operate under the influence of gravity, temperature and wind. Among those, temperature influences may degrade the performance of a radio telescope through transient changes of the focus, pointing, path length and sensitivity, often in an unpredictable way. Thermal Design and Thermal Behaviour of Radio Telescopes and their Enclosures reviews the design and construction principles of radio telescopes in view of thermal aspects and heat transfer with the variable thermal environment; it explains supporting thermal model calculations and the application and efficiency of thermal protection and temperature control; it presents many measurements illustrating the thermal behaviour of telescopes in the environment of their observatory sites. The book benefits scientists and radio/communication engineers, telescope designers and construction firms as well as telescope operators, observatory staff, but also the observing astronomer who is directly confronted with the thermal behaviour of a telescope.
Author: Albert Greve Publisher: Springer Science & Business Media ISBN: 3642038670 Category : Science Languages : en Pages : 409
Book Description
Radio telescopes as well as communication antennas operate under the influence of gravity, temperature and wind. Among those, temperature influences may degrade the performance of a radio telescope through transient changes of the focus, pointing, path length and sensitivity, often in an unpredictable way. Thermal Design and Thermal Behaviour of Radio Telescopes and their Enclosures reviews the design and construction principles of radio telescopes in view of thermal aspects and heat transfer with the variable thermal environment; it explains supporting thermal model calculations and the application and efficiency of thermal protection and temperature control; it presents many measurements illustrating the thermal behaviour of telescopes in the environment of their observatory sites. The book benefits scientists and radio/communication engineers, telescope designers and construction firms as well as telescope operators, observatory staff, but also the observing astronomer who is directly confronted with the thermal behaviour of a telescope.
Author: Baoyan Duan Publisher: Springer Nature ISBN: 9811913099 Category : Technology & Engineering Languages : en Pages : 2195
Book Description
The book presents high-quality papers from the Eighth Asia International Symposium on Mechatronics (AISM 2021). It discusses the latest technological trends and advances in electromechanical coupling and environmental adaptability design of electronic equipment, sensing and measurement, mechatronics in manufacturing and automations, energy harvesting & storage, robotics, automation and control systems. It includes papers based on original theoretical, practical and experimental simulations, development, applications, measurements, and testing. The applications and solutions discussed in the book provide excellent reference material for future product development.
Author: Jacob W.M. Baars Publisher: Springer ISBN: 331965148X Category : Science Languages : en Pages : 282
Book Description
This book demonstrates how progress in radio astronomy is intimately linked to the development of reflector antennas of increasing size and precision. The authors describe the design and construction of major radio telescopes as those in Dwingeloo, Jodrell Bank, Parkes, Effelsberg and Green Bank since 1950 up to the present as well as millimeter wavelength telescopes as the 30m MRT of IRAM in Spain, the 50m LMT in Mexico and the ALMA submillimeter instrument. The advances in methods of structural design and coping with environmental influences (wind, temperature, gravity) as well as application of new materials are explained in a non-mathematical, descriptive and graphical way along with the story of the telescopes. Emphasis is placed on the interplay between astronomical and electromagnetic requirements and structural, mechanical and control solutions. A chapter on management aspects of large telescope projects closes the book. The authors address a readership with interest in the progress of engineering solutions applied to the development of radio telescope reflectors and ground station antennas for satellite communication and space research. The book will also be of interest to historians of science and engineering with an inclination to astronomy.
Author: Lehlohonolo Philemon Tsele Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
The Hartebeesthoek Radio Astronomy Observatory (HartRAO) of South Africa is currently developing a Lunar Laser Ranger (LLR) system based on a 1-metre aperture telescope in collaboration with the National Aeronautics and Space Administration (NASA) and the Observatoire de la CA̳℗þte d'Azur (OCA). This LLR will be an addition to a small number of operating LLR stations globally and it is expected to achieve sub-centimetre range precision to the Moon. Key to this achievement, requires thermal analysis of the composite telescope structure, based on thermal properties of the telescope component materials and their interaction with the environment through conventional heat transfer mechanisms. This analysis includes a thermal monitoring system that will feed temperature measurements to a model that will assist the steering and pointing software of the telescope in order to minimize tracking errors. In particular, no study has been reported previously on the thermal behaviour and related structural changes coupled with displacements of the HartRAO LLR composite structure with respect to ambient air temperature at the observatory site. Furthermore, a prototype pointing and steering software package developed for the HartRAO LLR, has so far only been tested on a 125 mm dual refractor testbed telescope (under room temperature conditions) and achieved root mean squared error values at the 0.5 arcsecond level. The extent of variation of the achieved error values is currently not known, particularly when the pointing model will be tested on the actual LLR telescope, which will be exposed to the varying thermal environment during operation. Therefore, in this study the thermal behaviour and related distortion dynamics of the HartRAO LLR telescope composite structure were modelled for possible adverse impact on pointing. Key findings of this research study were that the thermal response time varies per LLR telescope material component, primarily due to their respective thermal properties. The spider assembly and outer tube surface had the largest range of thermal variations, and thus were identified as the main areas on the telescope where most thermal variations can be expected. However, the primary mirror surface including its mount as well as the fork assembly had the lowest range of thermal variations. The total deformations of the tube assembly were found to be in the range 2.9 I̲℗ơm to 40.7 I̲℗ơm from night (00h00) until approximately midday (11h30). The primary mirror had virtually zero localised deformations due to its resistance against temperature change. The LLR thermal dynamic model was proposed and several test results of the proposed model were presented which covered the placement of RTD sensors on thermally-important areas of the tube structure; measurement and interpolation of the optical tube temperatures; and tube displacements due to assumed thermal deformations were reported using a laser distance-measurement system. In particular, the smallest variations in relative displacements of the tube were found to be 0.418 mm (east), 0.512 mm (north) and 0.670 mm (height) whereas, the largest variations were 0.523 mm (east), 0.691 mm (north) and 0.751 mm (height) during the time period considered. This period was characterized by ambient temperatures that varied between 11.20 A̲℗ʻC and 29.90 A̲℗ʻC and corresponding tube temperatures that varied between 13.75 A̲℗ʻC and 33.84 A̲℗ʻC. This information constitutes an important input for guiding the efforts to determine the amount of correction needed to be fed into the LLR telescope pointing model to counteract expected thermally-induced pointing offsets. Overall these results are a step towards the development of a real-time thermal monitoring system for the HartRAO LLR telescope, which is imperative in maximizing the pointing accuracy of the telescope, thereby increasing the chance of being on-target with the retroreflectors located on the lunar surface. Efforts to maximize pointing accuracy for the HartRAO LLR would support the global effort of high-accuracy laser ranging, which currently provides millimetre precision. Lastly, these findings have significant implications in exploring strategies and options for developing thermal dynamic models and monitoring systems for current and future LLR optical telescopes.
Author: Susan Redmond Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
Balloon-borne experiments present unique thermal design challenges. Radiation and conduction are the predominant heat transfer mechanisms, with convection effects being difficult to characterize at an altitude of 35-40 km. This greatly constrains the thermal design options and makes predicting flight thermal behaviour difficult. SuperBIT aims to study weak gravitational lensing using a 0.5 m modified Dall-Kirkham visible-to-near-UV telescope capable of achieving 0.02" stability. To achieve the theoretical resolution of 0.25", mirror deformation gradients must be less than 15 nm and the thermal environment must be stable on hour-long time scales. The 2018 test flight served to collect data for post-flight characterization and to test the newly-developed heater control process. The post-flight characterization algorithm developed allows for parameter optimization, such as physical properties or applied heat loads, based on the temperature profile. An overview of the in-flight heater control performance, and extensive simulation results for the parameter-optimization-based thermal design are presented here.
Author: Pierre Bely Publisher: Springer Science & Business Media ISBN: 0387226060 Category : Science Languages : en Pages : 527
Book Description
There is no dearth of books on telescope optics and, indeed, optics is clearly a keyelementinthedesignandconstructionoftelescopes.Butitisbynomeans the only important element. As telescopes become larger and more costly, other aspects such as structures, pointing, wavefront control, enclosures, and project management become just as critical. Although most of the technical knowledge required for all these ?elds is available in various specialized books, journal articles, and technical reports, they are not necessarily written with application to telescopes in mind. This bookisa?rstattemptatassemblinginasingletextthebasicastronomicaland engineering principles used in the design and construction of large telescopes. Itsaimistobroadlycoverallmajoraspectsofthe?eld,fromthefundamentals ofastronomicalobservationto optics, controlsystems,structural,mechanical, andthermalengineering,aswellasspecializedtopicssuchassiteselectionand program management. This subject is so vast that an in-depth treatment is obviously imprac- cal. Our intent is therefore only to provide a comprehensive introduction to the essential aspects of telescope design and construction. This book will not replace specialized scienti?c and technical texts. But we hope that it will be useful for astronomers, managers, and systems engineers who seek a basic understanding of the underlying principles of telescope making, and for s- cialists who wish to acquaint themselves with the fundamental requirements and approaches of their colleagues in other disciplines.
Author: Kenneth J. Button Publisher: Elsevier ISBN: 0323153992 Category : Technology & Engineering Languages : en Pages : 363
Book Description
Infrared and Millimeter Waves, Volume 9: Millimeter Components and Techniques, Part I compiles the work of several authors while focusing on certain aspects of infrared and millimeter waves, such as sources of radiation, instrumentation, and millimeter systems. This volume deals with millimeter components and techniques. Chapter 1 covers millimeter wave communications, and then the succeeding chapter discusses a comparative study of millimeter waves and transmission lines. This book then tackles dielectric waveguide electrooptic devices, as well as millimeter-wave propagation and remote sensing of the atmosphere, which are covered in Chapter 4. The fifth chapter presents the technology of large radio telescopes for millimeter and submillimeter. The next chapter explains a gyrotron study program, and the last chapter discusses multimode analysis of quasi-optical gyrotrons and gyroklystrons. This book will be of great use for researchers or professionals whose work involves infrared and millimeter waves.
Author: Albert Greve
Author: Albert Greve
Author: Baoyan Duan
Author: Jacob W.M. Baars
Author: Lehlohonolo Philemon Tsele
Author: Susan Redmond
Author: Pierre Bely
Author: Li Jihui
Author: National Radio Astronomy Observatory (U.S.)
Author: 
Author: Kenneth J. Button