Maternidad no deseada! PDF Download

Author:
Publisher:
ISBN:
Category : Spanish language materials
Languages : en
Pages :

View

Book Description

Author: Tanja Huber
Publisher:
ISBN:
Category :
Languages : en
Pages : 0

View

Book Description

Author: International Atomic Energy Agency
Publisher:
ISBN: 9789201157201
Category : Technology & Engineering
Languages : en
Pages : 144

View

Book Description
This publication presents the material properties of all unirradiated Uranium-Molybdenum (U-Mo) fuel constituents that are essential for fuel designers and reactor operators to evaluate the fuel's performance and safety for research reactors. Many significant advances in the understanding and development of low enriched uranium U-Mo fuels have been made since 2004, stimulated by the need to understand irradiation behavior and early fuel failures during testing. The publication presents a comprehensive overview of mechanical and physical property data from U-Mo fuel research

Author: John V. Miller
Publisher:
ISBN:
Category : Ceramic materials
Languages : en
Pages : 34

View

Book Description

Author: Roy W. Endebrock
Publisher:
ISBN:
Category : Gas cooled reactors
Languages : en
Pages : 224

View

Book Description

Author: M. P. Johnson
Publisher:
ISBN:
Category : Molybdenum alloys
Languages : en
Pages : 38

View

Book Description
A series of experiments was designed to assess the suitability of uranium-molybdenum alloys as high-temperature, high-burnup fuels for advanced sodium cooled reactors. Specimens with molybdenum contents between 3 and 10% were subjected to capsule irradiation tests in the Materials Testing Reactor, to burnups up to 10,000 Mwd/MTU at temperatures between 800 and 1500 deg F. The results indicated that molybdenum has a considerable effect in reducing the swelling due to irradiation. For example. 3% molybdemum reduces the swelling from 25%, for pure uranium. to 7% at approximates 3,000 Mwd/MTU at 1270 deg F. Further swelling resistance can be gained by increasing the molybdenum content, but the amount gained becomes successively smaller. At higher irradiation levels, the amount of swelling rapidly becomes greater, and larger amounts of molybdenum are required to provide similar resistance. A limit of 7% swelling, at 900 deg F and an irradiation of 7,230 Mwd/ MTU, requires the use of 10% Nonemolybdenum in the alloy. The burnup rates were in the range of 2.0 to 4.0 x 10p13s fissiom/cc-sec. Small ternary additions of silicon and aluminum were shown to have a noticeable effect in reducing swelling when added to a U-3% Mo alloy base. Under the conditions of the present experiment, 0.26% silicon or 0.38% aluminum were equivalent to 1 to 1 1/2% molybdenum. The Advanced Sodium Cooled Reactor requires a fuel capable of being irradiated to 20,000 Mwd/MTU at temperatures up to 1500 deg C in metal fuel, or equivalent in ceramic fuel. It is concluded that even the highest molybdenum contents considered did not produce a fuel capable of operating satisfactorily under these conditions. The alloys would be useful, however, for less exacting conditions. The U-3% Mo alloy is capable of use up to 3,000 Mwd/MTU at temperatures of 1300 deg F before swelling becomes excessive. The addition of silicon and aluminum would increase this limit to at least 3,000 Mwd/MTU, and possibly more if the

Author: International Atomic Energy Agency
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 84

View

Book Description

Author: National Research Council
Publisher: National Academies Press
ISBN: 0309130395
Category : Medical
Languages : en
Pages : 220

View

Book Description
This book is the product of a congressionally mandated study to examine the feasibility of eliminating the use of highly enriched uranium (HEU2) in reactor fuel, reactor targets, and medical isotope production facilities. The book focuses primarily on the use of HEU for the production of the medical isotope molybdenum-99 (Mo-99), whose decay product, technetium-99m3 (Tc-99m), is used in the majority of medical diagnostic imaging procedures in the United States, and secondarily on the use of HEU for research and test reactor fuel. The supply of Mo-99 in the U.S. is likely to be unreliable until newer production sources come online. The reliability of the current supply system is an important medical isotope concern; this book concludes that achieving a cost difference of less than 10 percent in facilities that will need to convert from HEU- to LEU-based Mo-99 production is much less important than is reliability of supply.

Author: International Atomic Energy Agency
Publisher:
ISBN: 9789201203205
Category : Technology & Engineering
Languages : en
Pages : 84

View

Book Description
Research reactor fuel technology continues to evolve, driven in part by international efforts to develop high density fuels to enable the conversion of more reactors from highly enriched uranium (HEU) to low enriched uranium (LEU) fuels. These high density fuels may offer economic benefits for research reactors, despite being more expensive initially, because they offer the prospect of higher per-assembly burnup, thus reducing the number of assemblies that must be procured, and more flexibility in terms of spent fuel management compared to the currently qualified and commercially available LEU silicide fuels. Additionally, these new fuels may offer better performance characteristics. This publication provides a preliminary evaluation of the impacts on research reactor performance and fuel costs from using high density fuel. Several case studies are presented and compared to illustrate these impacts.

Author: J. Belle
Publisher:
ISBN:
Category : Nuclear fuels
Languages : en
Pages : 146

View

Book Description