Author: Mark CasarellaPublisher:
ISBN:
Category :
Languages : en
Pages : 300
Book Description
The Effects of Spray Characteristics on Combustion and Emission Performance of a Two-stroke Direct-injection Engine
Author: Mark CasarellaSpray Combustion and Emissions in a Direct-injection Two Stroke Engine with Wall-stabilization of an Air-assisted Spray
Author: Mark V. CasarellaPublisher:
ISBN:
Category : Spark ignition engines
Languages : en
Pages : 10
Book Description
Combustion and Emissions Potential in a Direct-injection Two-stroke Engine
Author: Brian McGuireTime-resolved Exhaust Measurements of a Two-stroke Direct-injection Engine
Author: Eric HudakEffect of Spray Characteristics on Combustion in a Direct Injection Spark Ignition Engine
Author: T. ShiraishiPublisher:
ISBN:
Category : Automobiles
Languages : en
Pages : 9
Book Description
Emission Control and Fuel Economy
Author: John H JohnsonPublisher: SAE International
ISBN: 1468602098
Category : Technology & Engineering
Languages : en
Pages : 700
Book Description
Emission and fuel economy regulations and standards are compelling manufacturers to build ultra-low emission vehicles. As a result, engineers must develop spark-ignition engines with integrated emission control systems that use reformulated low-sulfur fuel. Emission Control and Fuel Economy for Port and Direct Injected SI Engines is a collection of SAE technical papers that covers the fundamentals of gasoline direct injection (DI) engine emissions and fuel economy, design variable effects on HC emissions, and advanced emission control technology and modeling approaches. All papers contained in this book were selected by an accomplished expert as the best in the field; reprinted in their entirety, they present a pathway to integrated emission control systems that meet 2004-2009 EPA standards for light-duty vehicles.
Fundamentals of Fuel Injection and Emission in Two-stroke Engines
Author: Wadysaw MitianiecPublisher: Nova Science Publishers
ISBN: 9781536124729
Category : Two-stroke cycle engines
Languages : en
Pages : 0
Book Description
The main goal of the book is the presentation of the last theoretical and experimental works concerning fuel injection systems, mainly in small power two-stroke engines as well as in marine engines. This book includes thirteen chapters devoted to the processes of fuel injection and the combustion that takes place in a stratified charge within the cylinders of two-stroke engines. In the first two chapters, the division into different injection systems in two-stroke engines and each injection system is briefly described. Various theoretical and practical solutions of fueling system designs are described. In Chapter Three, mathematical models, the spatial movement of gas in the cylinder and the combustion chamber are introduced, taking into account the turbulence of the charge. Chapter Four relates to the behavior of fuel injected into the gaseous medium, including evaporation processes, disintegration and processes occurring while the fuel drops connect with the wall. The next section describes the zero-dimensional model of fuel injection in two-stroke engines along with examples of numerical calculations. The sixth chapter is devoted to CFD multi-dimensional models of movement and evaporation of the fuel in a closed gaseous medium, occurring also in other engine types. Chapter Seven describes a two-zone model of the combustion process and the effect of the geometry of the combustion chamber on the flame propagation with a simplified verification model of combustion. Chapter Eight compares the propagation phase of gas and liquid fuels concerning direct fuel injection as well as the direct fuel injection from the cylinder head and the thermodynamic parameters of the charge. The formation of the components during the combustion process in the direct fuel injection two-stroke engine was obtained by numerical calculations and results are discussed in Chapter Nine. Chapter Ten describes the parameters of the two-stroke engine with a direct fuel injection carried out at the Cracow University of Technology. Additionally, the chapter presents CFD simulations of fuel propagation and combustion processes, taking into account the formation of toxic components and exhaust gas emission. The processes of two direct rich mixture injection systems FAST and RMIS developed in CUT are presented in Chapter Eleven. Miscellaneous problems of direct fuel injection, such as characteristics of fuel injectors, problems of direct gaseous fuel injection, and the application of fuelling systems in outboard engines and snowmobile vehicles are presented in Chapter Twelve. A comparison of working parameters in two- and four stroke engines is also mapped out. The last chapters contain the final conclusions and remarks concerning fuel injection and emission of exhaust gases in small two-stroke engines. This book is a comprehensive monograph on fuel injection. The author presents a series of theoretical and design information from his own experience and on the basis of the works of other authors. The main text intends to direct fuel injection with respect to gas motion in the combustion chamber and influence the injection parameters for exhaust emission. The book presents its own theoretical work and experimental tests concerning a two-stroke gasoline engine with electrically controlled direct fuel injection. The book describes the processes of a general nature also occurring in other types of engines and presents a comparison of different injection systems on working parameters and gas emission. The book contains 294 images, 290 equations and 16 tables obtained from the CFD simulation and experimental works.
Direct Injection Systems
Author: Cornel C StanPublisher: SAE International
ISBN: 0768030498
Category : Technology & Engineering
Languages : en
Pages : 126
Book Description
Direct Injection Systems: The Next Decade in Engine Technology explores potentials that have been recognized and successfully applied, including fuel direct injection, fully variable valve control, downsizing, operation within hybrid scenarios, and use of alternative fuels.
Proceedings of the FISITA 2012 World Automotive Congress
Author: SAE-ChinaPublisher: Springer Science & Business Media
ISBN: 3642337775
Category : Technology & Engineering
Languages : en
Pages : 704
Book Description
Proceedings of the FISITA 2012 World Automotive Congress are selected from nearly 2,000 papers submitted to the 34th FISITA World Automotive Congress, which is held by Society of Automotive Engineers of China (SAE-China ) and the International Federation of Automotive Engineering Societies (FISITA). This proceedings focus on solutions for sustainable mobility in all areas of passenger car, truck and bus transportation. Volume 3: Future Automotive Powertrains (I) focuses on: •Alternative Fuel and New Engine •Advanced Hybrid Electric Vehicle •Plug-in Electric Vehicle Above all researchers, professional engineers and graduates in fields of automotive engineering, mechanical engineering and electronic engineering will benefit from this book. SAE-China is a national academic organization composed of enterprises and professionals who focus on research, design and education in the fields of automotive and related industries. FISITA is the umbrella organization for the national automotive societies in 37 countries around the world. It was founded in Paris in 1948 with the purpose of bringing engineers from around the world together in a spirit of cooperation to share ideas and advance the technological development of the automobile.
CHARACTERIZATION OF THE POST INJECTION BEHAVIOR OF GASOLINE DIRECT INJECTION FUEL INJECTORS
Author: Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Abstract : The characteristics of gasoline sprayed directly into combustion chambers are of critical importance to engine out emissions and combustion system development. The optimization of the spray characteristics to match the in-cylinder flow field, chamber geometry, and spark location are vital tasks during the development of an engine combustion strategy. Furthermore, the presence of liquid fuel during combustion in Spark-Ignition (SI) engines causes increased hydrocarbon (HC) emissions [1]. Euro 6, LEVIII, and US Tier 3 emissions regulations reduce the allowable particulate mass significantly from the previous standards. LEVIII standards reduce the acceptable particulate emission to 1 mg/mile [2]. A good Direct Injection Spark Ignited (DISI) strategy vaporizes the correct amount of fuel at the proper point in the engine cycle with the proper in-cylinder air flow for optimal power output with minimal emissions. The opening and closing phases of DISI injectors is crucial to this task as the spray produces larger droplets during both theses phases. This work focuses on the results from a novel method to investigate fuel behavior upon closing of the fuel injector. A Design of Experiments (DOE) was used to determine the effect of pressure, temperature, and pulse-width of the fuel spray after the closing event. Experiments determined that the primary source of controlling the droplet size and the mass post injector closing for a given injector was the temperature. It was found that the end of injection behavior is a highly dynamic, complex event including, but not limited to, effects from the injector design, deposit concentration, and fuel type.