The Effects of Aerodynamic Heating and Heat Transfer on the Surface Temperature of a Body of Revolution in Steady Supersonic Flight PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download The Effects of Aerodynamic Heating and Heat Transfer on the Surface Temperature of a Body of Revolution in Steady Supersonic Flight PDF full book. Access full book title The Effects of Aerodynamic Heating and Heat Transfer on the Surface Temperature of a Body of Revolution in Steady Supersonic Flight by Richard Scherrer. Download full books in PDF and EPUB format.
Author: Richard Scherrer Publisher: ISBN: Category : Aerodynamic heating Languages : en Pages : 542
Book Description
An approximate method for determining the convective cooling requirement in the laminar-boundary-layer region of a body of revolution in high-speed flight was developed and applied to an example body. The cooling requirement for the example body was determined as a function of Mach number, altitude, size, and a surface-temperature parameter. The maximum value of Mach number considered was 3.0 and the altitudes considered were those within the lower constant-temperature region of the atmosphere (40,000 to 120,000 ft). The extent of the laminar boundary layer was determined approximately at each condition as a function of the variables considered.
Author: Richard Scherrer Publisher: ISBN: Category : Aerodynamic heating Languages : en Pages : 542
Book Description
An approximate method for determining the convective cooling requirement in the laminar-boundary-layer region of a body of revolution in high-speed flight was developed and applied to an example body. The cooling requirement for the example body was determined as a function of Mach number, altitude, size, and a surface-temperature parameter. The maximum value of Mach number considered was 3.0 and the altitudes considered were those within the lower constant-temperature region of the atmosphere (40,000 to 120,000 ft). The extent of the laminar boundary layer was determined approximately at each condition as a function of the variables considered.
Author: Kenneth Margolis Publisher: ISBN: Category : Aerodynamics, Supersonic Languages : en Pages : 724
Book Description
Wave drag equations are derived for rhombic-profile tapered wings with maximum-thickness line swept less than the Mach line. Variations in drag with taper ratio, aspect ratio, sweepback, and Mach number are determined. Calculations are presented for representative plan forms and for a family of wings having equal root bending stress.
Author: Elmer A. Horton Publisher: ISBN: Category : Airplanes Languages : en Pages : 678
Book Description
An investigation was made to determine the effects of boundary-layer control on the landing performance characteristics of a liaison type of airplane having a payload of 1500 pounds and a flight duration of 5 hours. The aspect ratio was varied from 5 to 15, the wing span from 30 to 100 feet, and the brake horsepower from 300 to 1200. The use of boundary-layer control caused reduction in total landing distance (25 to 40 percent), ground-run distance, gliding speed, and stalling speed whereas sinking speed was increased only slightly.
Author: Richard Scherrer
Author: Richard Scherrer
Author: United States. National Advisory Committee for Aeronautics
Author: United States. National Advisory Committee for Aeronautics
Author: United States. National Advisory Committee for Aeronautics
Author: Kenneth Margolis
Author: United States. National Advisory Committee for Aeronautics
Author: 
Author: Elmer A. Horton
Author: 
Author: United States. National Advisory Committee for Aeronautics