Author: Don Good
Publisher:
ISBN: 9781895102130
Category :
Languages : en
Pages : 175
Book Description
The primary objective of the Vehicle Weights and Dimensions Study was to improve uniformity in size and weight regulations in interprovincial trucking in Canada. Once this was achieved, it became evident that there remained a range of related issues which were in need of investigation but which were not directly addressed by this research program. The interaction of trucks with other elements of the traffic stream is such an issue. In 1989, under the sponsorship of TAC's Research and Development Council, work was carried out by a Project Advisory Committee to develop a plan for research which would address the effect of vehicle length on traffic on two-lane, two-way roads in Canada. In January, 1990, a workshop was held to review the state of research and understanding of the preceeding issues, and to identify those which remained as relevant, viable areas for investigation. Consequently, in the spring of 1990 TAC initiated Phase I of this study under the sponsorship of the Research and Development Council and the Council of Deputy Ministers Responsible for Transportation and Highway Safety with the overall goal to : Evaluate the safety and level of service effects of vehicle length on traffic on two-lane, two-way roads in Canada. In January, 1991, the Research and Development Council agreed to sponsor a working session with the project's advisory committee and selected experts in the field. The objective of this session was to decide if the project should continue with a Phase II and if so, prepare the workplan and proposal for this additional work. The following report presents : (i) a summary of the findings contained in the Technical Report; (ii) the results of the working session in light of the objectives outlined above; (iii) implications of the work performed for this project to other TAC committees; and (iv) recommendations from this project's advisory committee to TAC's Research and Development Council. As such, it should be viewed as a supplement to the 1991 Technical Report and read in conjunction with the Technical Report.
The Effect of Vehicle Length on Traffic on Canadian Two-lane, Two-way Roads
Author: Don Good
Publisher:
ISBN: 9781895102130
Category :
Languages : en
Pages : 175
Book Description
The primary objective of the Vehicle Weights and Dimensions Study was to improve uniformity in size and weight regulations in interprovincial trucking in Canada. Once this was achieved, it became evident that there remained a range of related issues which were in need of investigation but which were not directly addressed by this research program. The interaction of trucks with other elements of the traffic stream is such an issue. In 1989, under the sponsorship of TAC's Research and Development Council, work was carried out by a Project Advisory Committee to develop a plan for research which would address the effect of vehicle length on traffic on two-lane, two-way roads in Canada. In January, 1990, a workshop was held to review the state of research and understanding of the preceeding issues, and to identify those which remained as relevant, viable areas for investigation. Consequently, in the spring of 1990 TAC initiated Phase I of this study under the sponsorship of the Research and Development Council and the Council of Deputy Ministers Responsible for Transportation and Highway Safety with the overall goal to : Evaluate the safety and level of service effects of vehicle length on traffic on two-lane, two-way roads in Canada. In January, 1991, the Research and Development Council agreed to sponsor a working session with the project's advisory committee and selected experts in the field. The objective of this session was to decide if the project should continue with a Phase II and if so, prepare the workplan and proposal for this additional work. The following report presents : (i) a summary of the findings contained in the Technical Report; (ii) the results of the working session in light of the objectives outlined above; (iii) implications of the work performed for this project to other TAC committees; and (iv) recommendations from this project's advisory committee to TAC's Research and Development Council. As such, it should be viewed as a supplement to the 1991 Technical Report and read in conjunction with the Technical Report.
Publisher:
ISBN: 9781895102130
Category :
Languages : en
Pages : 175
Book Description
The primary objective of the Vehicle Weights and Dimensions Study was to improve uniformity in size and weight regulations in interprovincial trucking in Canada. Once this was achieved, it became evident that there remained a range of related issues which were in need of investigation but which were not directly addressed by this research program. The interaction of trucks with other elements of the traffic stream is such an issue. In 1989, under the sponsorship of TAC's Research and Development Council, work was carried out by a Project Advisory Committee to develop a plan for research which would address the effect of vehicle length on traffic on two-lane, two-way roads in Canada. In January, 1990, a workshop was held to review the state of research and understanding of the preceeding issues, and to identify those which remained as relevant, viable areas for investigation. Consequently, in the spring of 1990 TAC initiated Phase I of this study under the sponsorship of the Research and Development Council and the Council of Deputy Ministers Responsible for Transportation and Highway Safety with the overall goal to : Evaluate the safety and level of service effects of vehicle length on traffic on two-lane, two-way roads in Canada. In January, 1991, the Research and Development Council agreed to sponsor a working session with the project's advisory committee and selected experts in the field. The objective of this session was to decide if the project should continue with a Phase II and if so, prepare the workplan and proposal for this additional work. The following report presents : (i) a summary of the findings contained in the Technical Report; (ii) the results of the working session in light of the objectives outlined above; (iii) implications of the work performed for this project to other TAC committees; and (iv) recommendations from this project's advisory committee to TAC's Research and Development Council. As such, it should be viewed as a supplement to the 1991 Technical Report and read in conjunction with the Technical Report.
The Effect of Vehicle Length on Traffic on Canadian Two-lane, Two-way Roads
Author: D. Good
Publisher:
ISBN: 9781895102130
Category : Highway capacity
Languages : en
Pages : 155
Book Description
The primary objective of the Vehicle Weights and Dimensions Study was to improve uniformity in size and weight regulations in interprovincial trucking in Canada. Once this was achieved, it became evident that there remained a range of related issues which were in need of investigation but which were not directly addressed by this research program. The interaction of trucks with other elements of the traffic stream is such an issue. In 1989, under the sponsorship of TAC's Research and Development Council, work was carried out by a Project Advisory Committee to develop a plan for research which would address the effect of vehicle length on traffic on two-lane, two-way roads in Canada. In January, 1990, a workshop was held to review the state of research and understanding of the preceeding issues, and to identify those which remained as relevant, viable areas for investigation. Consequently, in the spring of 1990 TAC initiated Phase I of this study under the sponsorship of the Research and Development Council and the Council of Deputy Ministers Responsible for Transportation and Highway Safety with the overall goal to : Evaluate the safety and level of service effects of vehicle length on traffic on two-lane, two-way roads in Canada. In January, 1991, the Research and Development Council agreed to sponsor a working session with the project's advisory committee and selected experts in the field. The objective of this session was to decide if the project should continue with a Phase II and if so, prepare the workplan and proposal for this additional work. The following report presents : (i) a summary of the findings contained in the Technical Report; (ii) the results of the working session in light of the objectives outlined above; (iii) implications of the work performed for this project to other TAC committees; and (iv) recommendations from this project's advisory committee to TAC's Research and Development Council. As such, it should be viewed as a supplement to the 1991 Technical Report and read in conjunction with the Technical Report.
Publisher:
ISBN: 9781895102130
Category : Highway capacity
Languages : en
Pages : 155
Book Description
The primary objective of the Vehicle Weights and Dimensions Study was to improve uniformity in size and weight regulations in interprovincial trucking in Canada. Once this was achieved, it became evident that there remained a range of related issues which were in need of investigation but which were not directly addressed by this research program. The interaction of trucks with other elements of the traffic stream is such an issue. In 1989, under the sponsorship of TAC's Research and Development Council, work was carried out by a Project Advisory Committee to develop a plan for research which would address the effect of vehicle length on traffic on two-lane, two-way roads in Canada. In January, 1990, a workshop was held to review the state of research and understanding of the preceeding issues, and to identify those which remained as relevant, viable areas for investigation. Consequently, in the spring of 1990 TAC initiated Phase I of this study under the sponsorship of the Research and Development Council and the Council of Deputy Ministers Responsible for Transportation and Highway Safety with the overall goal to : Evaluate the safety and level of service effects of vehicle length on traffic on two-lane, two-way roads in Canada. In January, 1991, the Research and Development Council agreed to sponsor a working session with the project's advisory committee and selected experts in the field. The objective of this session was to decide if the project should continue with a Phase II and if so, prepare the workplan and proposal for this additional work. The following report presents : (i) a summary of the findings contained in the Technical Report; (ii) the results of the working session in light of the objectives outlined above; (iii) implications of the work performed for this project to other TAC committees; and (iv) recommendations from this project's advisory committee to TAC's Research and Development Council. As such, it should be viewed as a supplement to the 1991 Technical Report and read in conjunction with the Technical Report.
The Effect of Vehicle Length on Traffic on Canadian Two-lane Two-way Rural Highways
Author: Roads and Transportation Association of Canada
Publisher:
ISBN:
Category : Highway capacity
Languages : en
Pages :
Book Description
Publisher:
ISBN:
Category : Highway capacity
Languages : en
Pages :
Book Description
Review of Canadian Experience with the Regulation of Large Commercial Motor Vehicles
Author: John H. F. Woodrooffe
Publisher: Transportation Research Board
ISBN: 0309155185
Category : Business & Economics
Languages : en
Pages : 137
Book Description
TRB's National Cooperative Highway Research Program (NCHRP) Report 671: Review of Canadian Experience with the Regulation of Large Commercial Motor Vehicles examines the process used in Canada to harmonize heavy truck size and weight regulations across the country. The report provides insights on how lessons learned from the Canadian experience might be applied in the United States.
Publisher: Transportation Research Board
ISBN: 0309155185
Category : Business & Economics
Languages : en
Pages : 137
Book Description
TRB's National Cooperative Highway Research Program (NCHRP) Report 671: Review of Canadian Experience with the Regulation of Large Commercial Motor Vehicles examines the process used in Canada to harmonize heavy truck size and weight regulations across the country. The report provides insights on how lessons learned from the Canadian experience might be applied in the United States.
Passing Sight Distance Criteria
Author: Douglas W. Harwood
Publisher: Transportation Research Board
ISBN: 0309099277
Category : Automobile driving
Languages : en
Pages : 95
Book Description
At head of title: National Cooperative Highway Research Program.
Publisher: Transportation Research Board
ISBN: 0309099277
Category : Automobile driving
Languages : en
Pages : 95
Book Description
At head of title: National Cooperative Highway Research Program.
The U.S. Department of Transportation's Comprehensive Truck Size and Weight Study. Volume IV: Guide to Documentation
Manual of Geometric Design Standards for Canadian Roads
Author: Roads and Transportation Association of Canada
Publisher:
ISBN:
Category : Highway engineering
Languages : en
Pages : 502
Book Description
Publisher:
ISBN:
Category : Highway engineering
Languages : en
Pages : 502
Book Description
Overtaking Lane Practice in Canada and Australia
Author: Christopher J. Hoban
Publisher:
ISBN:
Category : Transportation
Languages : en
Pages : 60
Book Description
Publisher:
ISBN:
Category : Transportation
Languages : en
Pages : 60
Book Description
Low-cost Methods for Improving Traffic Operations on Two-lane Roads
Author: Ramey O. Rogness
Publisher:
ISBN:
Category : Rural roads
Languages : en
Pages : 406
Book Description
Publisher:
ISBN:
Category : Rural roads
Languages : en
Pages : 406
Book Description
A Simulation Study of Traffic Flow Phenomena on Two-lane, Two-way Highways
Author: William Anthony Stock
Publisher:
ISBN:
Category : Traffic flow
Languages : en
Pages : 622
Book Description
Publisher:
ISBN:
Category : Traffic flow
Languages : en
Pages : 622
Book Description