Author:
Publisher:
ISBN: 9780898677393
Category : Carbon, Activated
Languages : en
Pages : 183
Book Description
The Effect of Metals on Thermal Regeneration of Granular Activated Carbon
Author:
Publisher:
ISBN: 9780898677393
Category : Carbon, Activated
Languages : en
Pages : 183
Book Description
Publisher:
ISBN: 9780898677393
Category : Carbon, Activated
Languages : en
Pages : 183
Book Description
The Effects of Metals on Thermal Regeneration of Granular Activated Carbon
Author: Frederick Scott Cannon
Publisher:
ISBN:
Category : Carbon, Activated
Languages : en
Pages : 432
Book Description
Publisher:
ISBN:
Category : Carbon, Activated
Languages : en
Pages : 432
Book Description
Thermal Regeneration of Granular Activated Carbon
Activated Carbon Adsorption
Author: Roop Chand Bansal
Publisher: CRC Press
ISBN: 1420028812
Category : Science
Languages : en
Pages : 498
Book Description
High surface area, a microporous structure, and a high degree of surface reactivity make activated carbons versatile adsorbents, particularly effective in the adsorption of organic and inorganic pollutants from aqueous solutions. Activated Carbon Adsorption introduces the parameters and mechanisms involved in the activated carbon adsorption
Publisher: CRC Press
ISBN: 1420028812
Category : Science
Languages : en
Pages : 498
Book Description
High surface area, a microporous structure, and a high degree of surface reactivity make activated carbons versatile adsorbents, particularly effective in the adsorption of organic and inorganic pollutants from aqueous solutions. Activated Carbon Adsorption introduces the parameters and mechanisms involved in the activated carbon adsorption
Thermal Regeneration of Activated Carbon for the Treatment of Drinking Water
Author: Mark Alan Waer
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Granular activated carbon (GAC) has been specified as the best available technology (BAT) for the removal of synthetic organic compounds from drinking water. Drinking water utilities which use GAC must either replace or regenerate the carbon periodically. Thermal regeneration is one option for handling spent carbon. The effect of several parameters on volume losses and on the recovery of adsorption capacity of granular activated carbon (GAC) during thermal regeneration has been studied. Parameters investigated during this study include the temperature of the regeneration step, the time of regeneration, the type of oxidant, and the oxidant flow rate. The apparent (bulk) density was found to be a good parameter for monitoring thermal regeneration. Other carbon properties followed during regeneration include the surface area (determined by nitrogen isotherm), the micropore volume and the mesopore volume. Optimum regeneration conditions were found to be dependant on the type of GAC being regenerated. The effect of multiple regenerations on carbon properties is discussed.
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Granular activated carbon (GAC) has been specified as the best available technology (BAT) for the removal of synthetic organic compounds from drinking water. Drinking water utilities which use GAC must either replace or regenerate the carbon periodically. Thermal regeneration is one option for handling spent carbon. The effect of several parameters on volume losses and on the recovery of adsorption capacity of granular activated carbon (GAC) during thermal regeneration has been studied. Parameters investigated during this study include the temperature of the regeneration step, the time of regeneration, the type of oxidant, and the oxidant flow rate. The apparent (bulk) density was found to be a good parameter for monitoring thermal regeneration. Other carbon properties followed during regeneration include the surface area (determined by nitrogen isotherm), the micropore volume and the mesopore volume. Optimum regeneration conditions were found to be dependant on the type of GAC being regenerated. The effect of multiple regenerations on carbon properties is discussed.
The regeneration of granular activated carbon using hydrothermal technology
Author: Michael David Sufnarski
Publisher:
ISBN:
Category :
Languages : en
Pages : 184
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 184
Book Description
Thermal Regeneration of Activated Carbon
Author: Louis Hemphill
Publisher:
ISBN:
Category : Carbon, Activated
Languages : en
Pages : 120
Book Description
Publisher:
ISBN:
Category : Carbon, Activated
Languages : en
Pages : 120
Book Description
Improving the Thermal Regeneration of Granular Activated Carbon at the Upper Occoquan Sewage Authority
Author: Enio Guelfo Sebastiani
Publisher:
ISBN:
Category :
Languages : en
Pages : 200
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 200
Book Description
Environmental Modeling
Author: Vijay P. Singh
Publisher: Water Resources Publication
ISBN: 9781887201230
Category : Science
Languages : en
Pages : 464
Book Description
Publisher: Water Resources Publication
ISBN: 9781887201230
Category : Science
Languages : en
Pages : 464
Book Description
In-Situ Regeneration of Granular Activated Carbon (GAC) Using Fenton's Reagents
Author: Carla De Las Casas
Publisher:
ISBN:
Category :
Languages : en
Pages : 430
Book Description
Fenton-dependent recovery of carbon initially saturated with one of several chlorinated aliphatic contaminants was studied in batch and continuous-flow reactors. A specialty carbon, URV-MOD 1 (Calgon) was employed to minimize non-productive H2O2 demand - that which does not yield hydroxyl or superoxide radicals. Enhancement of PCE degradation kinetics by ferric iron addition is limited by iron solubility, even at relatively low pH. Quinone addition increased the pseudo-first-order rate constant for PCE loss temporarily. Only copper addition sustainably enhanced the specific rate of PCE loss. For copper-to-iron molar ratios of 0.25 to 5, the pseudo-first-order rate constant for PCE transformation was increased by a factor of 3.5. It is apparent that the effect of copper addition on Fenton-dependent reaction rates is complex, and involves a shift in chemical mechanism, as indicated by the differing slopes in the Arrhenius plot (with and without copper).A mathematical model was developed to evaluate the effect of operational parameters ([Fe(III)]T:[H2O2]o ratio and pH) on degradation kinetics and optimize the PCE degradation process in homogeneous reaction mixtures. The model simulated experimental degradation of the organic target in a homogeneous Fenton-reaction system. The model requires further refinement to simulate Fenton's systems in which ions in solution (such as sulfate and chloride) play significant roles. In continuous-flow reactors, Fenton's reagents were cycled through spent GAC in columns to degrade one of seven chlorinated compounds tested. The contaminant with the weakest adsorption characteristics, methylene chloride, was 99% lost from the carbon surface during a 14-hour regeneration period. At the field site, the GAC was saturated with gases containing TCE and PCE from a soil vapor extraction (SVE) system. In the field, up to 95% of the sorbed TCE was removed from GAC during regeneration periods of 50-60 hours. Recovery of PCE-loaded GAC was significantly slower. Column experiments show that there is minimal loss of carbon adsorption capacity during Fenton treatment and that the rate of GAC regeneration is compound specific. Scoping-level cost estimates indicated that field use of Fenton regeneration is not cost effective without optimization and/or iron surface amendments, except in the case of the most soluble VOCs.
Publisher:
ISBN:
Category :
Languages : en
Pages : 430
Book Description
Fenton-dependent recovery of carbon initially saturated with one of several chlorinated aliphatic contaminants was studied in batch and continuous-flow reactors. A specialty carbon, URV-MOD 1 (Calgon) was employed to minimize non-productive H2O2 demand - that which does not yield hydroxyl or superoxide radicals. Enhancement of PCE degradation kinetics by ferric iron addition is limited by iron solubility, even at relatively low pH. Quinone addition increased the pseudo-first-order rate constant for PCE loss temporarily. Only copper addition sustainably enhanced the specific rate of PCE loss. For copper-to-iron molar ratios of 0.25 to 5, the pseudo-first-order rate constant for PCE transformation was increased by a factor of 3.5. It is apparent that the effect of copper addition on Fenton-dependent reaction rates is complex, and involves a shift in chemical mechanism, as indicated by the differing slopes in the Arrhenius plot (with and without copper).A mathematical model was developed to evaluate the effect of operational parameters ([Fe(III)]T:[H2O2]o ratio and pH) on degradation kinetics and optimize the PCE degradation process in homogeneous reaction mixtures. The model simulated experimental degradation of the organic target in a homogeneous Fenton-reaction system. The model requires further refinement to simulate Fenton's systems in which ions in solution (such as sulfate and chloride) play significant roles. In continuous-flow reactors, Fenton's reagents were cycled through spent GAC in columns to degrade one of seven chlorinated compounds tested. The contaminant with the weakest adsorption characteristics, methylene chloride, was 99% lost from the carbon surface during a 14-hour regeneration period. At the field site, the GAC was saturated with gases containing TCE and PCE from a soil vapor extraction (SVE) system. In the field, up to 95% of the sorbed TCE was removed from GAC during regeneration periods of 50-60 hours. Recovery of PCE-loaded GAC was significantly slower. Column experiments show that there is minimal loss of carbon adsorption capacity during Fenton treatment and that the rate of GAC regeneration is compound specific. Scoping-level cost estimates indicated that field use of Fenton regeneration is not cost effective without optimization and/or iron surface amendments, except in the case of the most soluble VOCs.