The Effect of Grain Size and Stability on Ambient Temperature Tensile and Creep Deformation Behavior of Metastable Beta Titanium Alloys PDF Download

Author: Durgalakshmi Doraiswamy
Publisher:
ISBN:
Category :
Languages : en
Pages : 244

View

Book Description

Author: Anand Ramesh
Publisher:
ISBN:
Category :
Languages : en
Pages : 310

View

Book Description

Author: Charles Arthur Greene
Publisher:
ISBN:
Category : Titanium alloys
Languages : en
Pages : 392

View

Book Description
Systematic studies were undertaken to determine the ambient temperature tensile and creep deformation behavior, including mechanisms, of alpha Ti-Mn, and alpha-beta and beta Ti-Mn and Ti-V alloys. In regard to the a Ti-Mn alloy, it was found that when creep tested at 95% of the 0.2% Yield Stress (YS) the creep strain of the coarse grained (500 microns) material was significantly higher than the fine grained (45 microns) material. This effect was found to be due to the scientifically interesting phenomenon of time dependent twinning in coarse grained alpha phase. Such a phenomenon has never been reported before. Based on optical and scanning electron microscopic observations of displacements of the grid lines obtained by electron lithography and transmission electron microscopic observations, it was found that there are strong slip/twin, twin/slip and twin/twin interactions during creep deformation. The tensile deformation of beta titanium alloys depended on the alloying elements. In the beta Ti-Mn alloy the tensile deformation mechanisms were found to be coarse and wavy slip whereas in the beta Ti-V alloy the deformation mechanisms were found to be coarse and wavy slip as well as twinning. This difference was attributed to the difference in stability of the beta phase. In contrast to the a Ti-Mn alloy the creep deformation in the beta Ti-Mn alloy was found to be negligibly small at a stress level of 95% YS. With respect to alpha-beta titanium alloys, for similar volume percent and morphology of phases, the tensile and creep deformation mechanisms were also found to depend on the alloying elements. In regard to the alpha-beta Ti-Mn alloy, the deformation mechanisms were found to be predominately fine slip in alpha and beta phases and occasional interface sliding.

Author: Charles Arthur Greene
Publisher:
ISBN:
Category : Titanium alloys
Languages : en
Pages : 0

View

Book Description
Systematic studies were undertaken to determine the ambient temperature tensile and creep deformation behavior, including mechanisms, of alpha Ti-Mn, and alpha-beta and beta Ti-Mn and Ti-V alloys. In regard to the a Ti-Mn alloy, it was found that when creep tested at 95% of the 0.2% Yield Stress (YS) the creep strain of the coarse grained (500 microns) material was significantly higher than the fine grained (45 microns) material. This effect was found to be due to the scientifically interesting phenomenon of time dependent twinning in coarse grained alpha phase. Such a phenomenon has never been reported before. Based on optical and scanning electron microscopic observations of displacements of the grid lines obtained by electron lithography and transmission electron microscopic observations, it was found that there are strong slip/twin, twin/slip and twin/twin interactions during creep deformation. The tensile deformation of beta titanium alloys depended on the alloying elements. In the beta Ti-Mn alloy the tensile deformation mechanisms were found to be coarse and wavy slip whereas in the beta Ti-V alloy the deformation mechanisms were found to be coarse and wavy slip as well as twinning. This difference was attributed to the difference in stability of the beta phase. In contrast to the a Ti-Mn alloy the creep deformation in the beta Ti-Mn alloy was found to be negligibly small at a stress level of 95% YS. With respect to alpha-beta titanium alloys, for similar volume percent and morphology of phases, the tensile and creep deformation mechanisms were also found to depend on the alloying elements. In regard to the alpha-beta Ti-Mn alloy, the deformation mechanisms were found to be predominately fine slip in alpha and beta phases and occasional interface sliding.

Author: Jeremy V. Gluck, James W. Freeman
Publisher:
ISBN:
Category :
Languages : en
Pages : 115

View

Book Description

Author: Swee Leong Sing
Publisher: Springer
ISBN: 9811327246
Category : Technology & Engineering
Languages : en
Pages : 110

View

Book Description
This book investigates the microstructural and mechanical properties of titanium-tantalum (TiTa) alloy formed using selective laser melting (SLM). TiTa has potential orthopaedic biomedical applications thanks to its high strength to modulus ratio. However, because it is difficult to obtain, it is still not widely used. The book describes how SLM is utilized to form this alloy, and provides a better understanding of the SLM process in porous lattice structure fabrication and its control through statistical modelling.

Author: J. V. Gluck
Publisher:
ISBN:
Category :
Languages : en
Pages : 12

View

Book Description

Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 456

View

Book Description
Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Author: J.V. Gluck
Publisher:
ISBN:
Category :
Languages : en
Pages : 15

View

Book Description

Author: Frank Charles Holden
Publisher:
ISBN:
Category : Titanium
Languages : en
Pages : 156

View

Book Description