The Design of Resilient Heat Exchanger Networks and Their Control Structures PDF Download

Author: Daniel F. Marselle
Publisher:
ISBN:
Category : Heat exchangers
Languages : en
Pages : 472

View

Book Description

Author: W. H. Shafer
Publisher: Springer Science & Business Media
ISBN: 1468442295
Category : Science
Languages : en
Pages : 311

View

Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing. house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 25 (thesis year 1980) a total of 10,308 theses titles from 27 Canadian and 214 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 25 reports theses submitted in 1980, on occasion, certain universities do report theses submitted in previous years but not reported at the time.

Author: Wilfried Roetzel
Publisher: Academic Press
ISBN: 0128178957
Category : Technology & Engineering
Languages : en
Pages : 598

View

Book Description
Design and Operation of heat Exchangers and Their Networks presents a comprehensive and detailed analysis on the thermal design methods for the most common types of heat exchangers, with a focus on their networks, simulation procedures for their operations, and measurement of their thermal performances. The book addresses the fundamental theories and principles of heat transfer performance of heat exchangers and their applications and then applies them to the use of modern computing technology. Topics discussed include cell methods for condensers and evaporators, dispersion models for heat exchangers, experimental methods for the evaluation of heat exchanger performance, and thermal calculation algorithms for multi-stream heat exchangers and heat exchanger networks. - Includes MATLAB codes to illustrate how the technologies and methods discussed can be easily applied and developed - Analyses a range of different models, applications, and case studies in order to reveal more advanced solutions for industrial applications - Maintains a strong focus on the fundamental theories and principles of the heat transfer performance of heat exchangers and their applications for complex flow arrangement

Author: Institution of Chemical Engineers (Great Britain)
Publisher:
ISBN:
Category : Chemical engineering
Languages : en
Pages : 712

View

Book Description

Author:
Publisher:
ISBN:
Category : Power resources
Languages : en
Pages : 660

View

Book Description

Author: Jeffrey J. Siirola
Publisher: Elsevier Publishing Company
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 584

View

Book Description
Improved process engineering in general, and better process design specifically, hold the key to technology advancement in the chemical as well as biological, electronic, and other processing industries. This volume contains the proceedings of the Third International Conference on Foundations of Computer-Aided Process Design, which brought together engineers, scientists and graduate student researchers from a number of industrial, academic and government institutions throughout the world to assess and discuss the current status and future directions of computer aided process engineering. The specific objectives of the conference were to provide a forum for an in-depth review of the current state-of-the-art in chemical process design as well as an introduction to process and product design in other disciplines, an evaluation of current and future needs in process design, a formulation of new research directions in computer-aided process design and an examination of educational needs in chemical engineering design.

Author: Baris Burnak
Publisher: Springer Nature
ISBN: 3031020898
Category : Technology & Engineering
Languages : en
Pages : 242

View

Book Description
This book presents a comprehensive optimization-based theory and framework that exploits the synergistic interactions and tradeoffs between process design and operational decisions that span different time scales. Conventional methods in the process industry often isolate decision making mechanisms with a hierarchical information flow to achieve tractable problems, risking suboptimal, even infeasible operations. In this book, foundations of a systematic model-based strategy for simultaneous process design, scheduling, and control optimization is detailed to achieve reduced cost and improved energy consumption in process systems. The material covered in this book is well suited for the use of industrial practitioners, academics, and researchers. In Chapter 1, a historical perspective on the milestones in model-based design optimization techniques is presented along with an overview of the state-of-the-art mathematical tools to solve the resulting complex problems. Chapters 2 and 3 discuss two fundamental concepts that are essential for the reader. These concepts are (i) mixed integer dynamic optimization problems and two algorithms to solve this class of optimization problems, and (ii) developing a model based multiparametric programming model predictive control. These tools are used to systematically evaluate the tradeoffs between different time-scale decisions based on a single high-fidelity model, as demonstrated on (i) design and control, (ii) scheduling and control, and (iii) design, scheduling, and control problems. We present illustrative examples on chemical processing units, including continuous stirred tank reactors, distillation columns, and combined heat and power regeneration units, along with discussions of other relevant work in the literature for each class of problems.

Author: J.D. Perkins
Publisher: Elsevier
ISBN: 148329790X
Category : Technology & Engineering
Languages : en
Pages : 251

View

Book Description
The volume provides the systems engineer working in process control, with state-of-the-art research papers and practical applications, which will be a valuable reference source.

Author: Jiří Jaromír Klemeš
Publisher: MDPI
ISBN: 3039281348
Category : Science
Languages : en
Pages : 494

View

Book Description
The depletion of natural energy resources provides evidential adverse impacts on world economy functionality. The strong requirement of a sustainable energy supply has escalated intensive research and the discovery of cleaner energy sources, as well as efficient energy management practices. In the context of a circular economy, this research not only targets the optimisation of resources utilisation at different stages but also emphasises the eco-design of products to extend production life spans. Based on this concept, this book discusses the roles of process integration approaches, renewable energy sources utilisation and design modifications in addressing the process energy and exergy efficiency improvement. The primary focus is to enhance the economic and environmental performance through process analysis, modelling and optimisation. The articles mainly show the contribution of each aspect: (a) design and numerical study for innovative energy-efficient technologies, (b) process integration—heat and power, (c) process energy efficiency or emission analysis, and (d) optimisation of renewable energy resources’ supply chain. The articles are based on the latest contribution of this journal’s Special Issues in the 21st conference entitled “Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES)”. This book is complemented with an editorial review to highlight the broader state-of-the-art development.

Author: Wade H. Shafer
Publisher: Springer
ISBN: 9780306423857
Category : Science
Languages : en
Pages : 424

View

Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 29 (thesis year 1984) a total of 12,637 theses titles from 23 Canadian and 202 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 29 reports theses submitted in 1984, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.