Author: Publisher:
ISBN:
Category : Brass founding
Languages : en
Pages : 506
Book Description
Platers' Guide
Author: The Brass World and Platers Guide
Author: The Brass World and Platers Guide
Author: The Brass World and Platers's Guide, Vol. 11 (Classic Reprint)
Author: Publisher: Forgotten Books
ISBN: 9780331605136
Category : Technology & Engineering
Languages : en
Pages : 542
Book Description
Excerpt from The Brass World and Platers's Guide, Vol. 11 Glue for use in the plating room should be well boiled, and the wheels, after cleaning off the Old glue and emery, must be sized with a thin mixture of glue and hot water and after drying, coated with the regular glue or rolled in emery. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
The Brass World and Platers' Guide, 1910, Vol. 6
Author: Erwin S. SperryPublisher: Forgotten Books
ISBN: 9780484156462
Category : Technology & Engineering
Languages : en
Pages : 468
Book Description
Excerpt from The Brass World and Platers' Guide, 1910, Vol. 6: A Monthly Journal In Fig. 2 is shown the method of heating an evaporating dish by means of a sand-bath. The sand - bath itself is simply a shallow dish of sheet iron. An old tin pan or enameled iron dish may be used as long as it is not soldered together. It is filled with sand and the dish set down into it evenly so that the sand comes in contact with the bottom. The whole is heated by a gas stove or any other desired means at hand. The object of the sand is to allow a gradual and uniform heat ing. If a naked flame. Is applied to the dish. The heat is too fierce and uneven. And under such circumstances the dish is apt to crack. 4\ water-bath can also be used but it is not as convenient as the sand. The best porcelain dishes are glazed on the inside so that they are readily kept clean. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
The Brass World and Platers' Guide, 1913, Vol. 9
Author: Erwin S. SperryPublisher: Forgotten Books
ISBN: 9781333258344
Category : Technology & Engineering
Languages : en
Pages : 472
Book Description
Excerpt from The Brass World and Platers' Guide, 1913, Vol. 9: A Journal Devoted to the Art of Refining, Alloying, Casting, Rolling, Founding, and Electroplating of All the Non-Ferrous Metals That a gold plating solution should be run hot whenever possible as the deposit has a better color. And covers more thoroughly and more rapidly. That nickel solutions become alkaline by the introduction of potash or soda from the clean ing kettle and not from other causes. The tendency 6f a nickel solution is to become acid rather than alkaline unless an alkali is actually introduced. That a silver solution should be kept free from sediment or it will settle on the work and cause pits. That boracic acid is an excellent ingredient of nickel plating solutions as it produces a white deposit and prevents pitting. That sal-ammoniac in a nickel solution ih creases the conductivity and causes the anodes to dissolve more freely. That the amount of any metal deposited is dependent upon the number of amperes passing through the solution. Twice the number of amperes will give twice the weight of deposit in a given time. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Platers' Guide
Author: Platers' Guide, with Which Is Incorporated Brass World
Author: HardpressPublisher: Hardpress Publishing
ISBN: 9781314261547
Category :
Languages : en
Pages : 474
Book Description
Unlike some other reproductions of classic texts (1) We have not used OCR(Optical Character Recognition), as this leads to bad quality books with introduced typos. (2) In books where there are images such as portraits, maps, sketches etc We have endeavoured to keep the quality of these images, so they represent accurately the original artefact. Although occasionally there may be certain imperfections with these old texts, we feel they deserve to be made available for future generations to enjoy.
Platers' Guide, with Which Is Incorporated Brass World
Author: HardpressPublisher: Hardpress Publishing
ISBN: 9781314261561
Category :
Languages : en
Pages : 530
Book Description
Unlike some other reproductions of classic texts (1) We have not used OCR(Optical Character Recognition), as this leads to bad quality books with introduced typos. (2) In books where there are images such as portraits, maps, sketches etc We have endeavoured to keep the quality of these images, so they represent accurately the original artefact. Although occasionally there may be certain imperfections with these old texts, we feel they deserve to be made available for future generations to enjoy.
Platers' Guide, with Which Is Incorporated Brass World
Author: HardpressPublisher: Hardpress Publishing
ISBN: 9781314261554
Category :
Languages : en
Pages : 476
Book Description
Unlike some other reproductions of classic texts (1) We have not used OCR(Optical Character Recognition), as this leads to bad quality books with introduced typos. (2) In books where there are images such as portraits, maps, sketches etc We have endeavoured to keep the quality of these images, so they represent accurately the original artefact. Although occasionally there may be certain imperfections with these old texts, we feel they deserve to be made available for future generations to enjoy.