The Behavior of Thin Walled Structures: Beams, Plates, and Shells PDF Download

Author: Jack R. Vinson
Publisher: Springer Science & Business Media
ISBN: 9400927746
Category : Science
Languages : en
Pages : 194

View

Book Description
This book is intended primarily as a teaching text, as well as a reference for individual study in the behavior of thin walled structural components. Such structures are widely used in the engineering profession for spacecraft, missiles, aircraft, land-based vehicles, ground structures, ocean craft, underwater vessels and structures, pressure vessels, piping, chemical processing equipment, modern housing, etc. It presupposes that the reader has already completed one basic course in the mechanics or strength of materials. It can be used for both undergraduate and graduate courses. Since beams (columns, rods), plates and shells comprise components of so many of these modern structures, it is necessary for engineers to have a working knowledge of their behavior when these structures are subjected to static, dynamic (vibration and shock) and environmental loads. Since this text is intended for both teaching and self-study, it stresses fundamental behavior and techniques of solution. It is not an encyclopedia of all research or design data, but provides the reader the wherewithal to read and study the voluminous literature. Chapter 1 introduces the three-dimensional equations oflinear elasticity, deriving them to the extent necessary to treat the following material. Chapter 2 presents, in a concise way, the basic assumptions and derives the governing equations for classical Bernoulli-Euler beams and plates in a manner that is clearly understood.

Author: Haim Abramovich
Publisher: Woodhead Publishing
ISBN: 008100429X
Category : Technology & Engineering
Languages : en
Pages : 772

View

Book Description
Stability and Vibrations of Thin-Walled Composite Structures presents engineering and academic knowledge on the stability (buckling and post buckling) and vibrations of thin walled composite structures like columns, plates, and stringer stiffened plates and shells, which form the basic structures of the aeronautical and space sectors. Currently, this knowledge is dispersed in several books and manuscripts, covering all aspects of composite materials. The book enables both engineers and academics to locate valuable, up-to-date knowledge on buckling and vibrations, be it analytical or experimental, and use it for calculations or comparisons. The book is also useful as a textbook for advanced-level graduate courses. - Presents a unified, systematic, detailed and comprehensive overview of the topic - Contains contributions from leading experts in the field - Includes a dedicated section on testing and experimental results

Author: Ansel C. Ugural
Publisher: CRC Press
ISBN: 1439882525
Category : Science
Languages : en
Pages : 598

View

Book Description
Noted for its practical, student-friendly approach to graduate-level mechanics, this volume is considered one of the top references—for students or professioals—on the subject of elasticity and stress in construction. The author presents many examples and applications to review and support several foundational concepts. The more advanced concepts in elasticity and stress are analyzed and introduced gradually, accompanied by even more examples and engineering applications in addition to numerous illustrations.Chapter problems are carefully arranged from the basic to the more challenging. The author covers computer methods, including FEA and computational/equation-solving software, and, in many cases, classical and numerical/computer approaches.

Author: Jack R. Vinson
Publisher: Springer Science & Business Media
ISBN: 9780792321132
Category : Science
Languages : en
Pages : 584

View

Book Description
Shell structures are used in all phases of structures, from space vehicles to deep submergence hulls, from nuclear reactors to domes on sport arenas and civic buildings. With new materials and manufacturing methods, curved thin walled structures are being used increasingly. This text is a graduate course in the theory of shells. It covers shells of isotropic materials, such as metal alloys and plastics, and shells of composite materials, such as fibre reinforced polymer, metal or ceramic matrix materials. It provides the essential information for an understanding of the underlying theory, and solution of some of the basic problems. It also provides a basis to study the voluminous shell literature. Beyond being primarily a textbook, it is intended also for self study by practising engineers who would like to learn more about the behaviour of shells. The book has two parts: Part I deals with shells of isotropic materials. In this part the mathematical formulations are introduced involving curvilinear coordinates. The techniques of solutions and resulting behavior is compared to planar thin walled isotropic structures such as plates and beams. Part II then treats the behavior of shells, involving anisotropic composite materials, so widely used today. The analysis involves the complications due to the many elastic constants, effects of transverse shear deformation, thermal thickening and offer effects arising from the properties of composite materials.

Author: Haim Abramovich
Publisher: World Scientific
ISBN: 9811214263
Category : Technology & Engineering
Languages : en
Pages : 419

View

Book Description
This unique compendium presents some new topics related to thin-walled structures, like beams, plates and shells used in aerospace structures. It highlights their dynamic behaviors and also the correlation between compressive loading and natural frequency to enable a correlation between the two, yielding a valuable non-destructive tool, to predict buckling for thin-walled structures.This useful reference text combines valuable data on metal materials and composite materials together with new adaptive and smart materials like piezoelectricity, shape memory alloys and optic fibers, which form the present state of the art in thin-walled structure domain.

Author: JackR. Vinson
Publisher: Routledge
ISBN: 1351411314
Category : Technology & Engineering
Languages : en
Pages : 398

View

Book Description
The Behavior of Sandwich Structures of Isotropic and Composite Materials presents the mathematics, descriptions, and analytical techniques in the growing field of sandwich structures. From a background in sandwich structures to thermoelastic problems of sandwich structures and sandwich shell theory, the book provides the knowledge needed to analyze, design, and optimize various sandwich structures. As one would expect from a book on sandwich structures, this volume discusses special failure modes such as face wrinkling and core shear instability. Coverage includes not only honeycomb cores, but also foam, web, and truss cores. An important topic in composite structure design, optimization is explored in two chapters on sandwich plates and sandwich shells. The author presents the optimization techniques in closed form and the methods are applicable to material selection and geometric design. The book also contains a set of problems and references at the end of each chapter. This text is ideal for engineers-in-training, as well as practical engineers who desire a comprehensive understanding of sandwich structures technology.

Author: Eduard Ventsel
Publisher: CRC Press
ISBN: 9780203908723
Category : Mathematics
Languages : en
Pages : 688

View

Book Description
Presenting recent principles of thin plate and shell theories, this book emphasizes novel analytical and numerical methods for solving linear and nonlinear plate and shell dilemmas, new theories for the design and analysis of thin plate-shell structures, and real-world numerical solutions, mechanics, and plate and shell models for engineering appli

Author: Hui-shen Shen
Publisher: World Scientific
ISBN: 9813147016
Category : Technology & Engineering
Languages : en
Pages : 697

View

Book Description
As an expert in structure and stress analysis, the author has written extensively on functionally graded materials (FGMs), nonlinear vibration and dynamic response of functionally graded material plates in thermal environments, buckling and postbuckling analysis of single-walled carbon nanotubes in thermal environments. This book provides a comprehensive overview of the author's works which include significant contributions to the postbuckling behavior of plates and shells under different loading and environmental conditions.This book comprises eight chapters. Each chapter contains adequate introductory material so that an engineering graduate who is familiar with basic understanding of plates and shells will be able to follow it.

Author: D.A. Hills
Publisher: Springer Science & Business Media
ISBN: 9401582815
Category : Technology & Engineering
Languages : en
Pages : 251

View

Book Description
Failures of many mechanical components in service result from fatigue. The cracks which grow may either originate from some pre-existing macroscopic defect, or, if the component is of high integrity but highly stressed, a region of localized stress concentration. In turn, such concentrators may be caused by some minute defect, such as a tiny inclusion, or inadvertent machining damage. Another source of surface damage which may exist between notionally 'bonded' components is associated with minute relative motion along the interface, brought about usually be cyclic tangential loading. Such fretting damage is quite insidious, and may lead to many kinds of problems such as wear, but it is its influence on the promotion of embryo cracks with which we are concerned here. When the presence of fretting is associated with decreased fatigue performance the effect is known as fretting fatigue. Fretting fatigue is a subject drawing equally on materials science and applied mechanics, but it is the intention in this book to concentrate attention entirely on the latter aspects, in a search for the quantification of the influence of fretting on both crack nucleation and propagation. There have been very few previous texts in this area, and the present volume seeks to cover five principal areas; (a) The modelling of contact problems including partial slip under tangentialloading, which produces the surface damage. (b) The modelling of short cracks by rigorous methods which deal effectively with steep stress gradients, kinking and closure. (c) The experimental simulation of fretting fatigue.

Author: R. King
Publisher: Springer Science & Business Media
ISBN: 9401579733
Category : Science
Languages : en
Pages : 261

View

Book Description
This volume is a selection of the material presented at the 7th European Mixing Congress. It is concerned exclusively with mixing in circular section vessels, using centrally mounted paddles or similar impellers. The contents are arranged under three classifications: Modelling of Mixing Processes, Mixing Operations and Experimental Techniques. The classifications result in the original material appearing in a different order to that of the Congress. This arrangement is intended to assist the reader in identifying the topic area by function or application, rather than by technology. In this book the section on Modelling contains papers which focus on the representation of the mixing process, whether by equation, scale-up criteria, or fluid dynamic simulation. Similarly, Mixing Operations are concerned with the application or function of the mixing process, such as mass transfer, heat transfer or mixing time. Experimental Techniques addresses the tools the researcher needs to use at the data gathering experimental stage. It collects together advances made in the various methods used by some of the foremost researchers, and indicates those areas still in need of additional instrumentation or methods of data reduction. The book is intended for researchers, designers and users of mixing equipment, and for those planning research and development programmes and who wish to keep up to date with advances in the basic technology and its applications.