Templated Self-assembly of Siloxane Block Copolymers for Nanofabrication PDF Download

Author: Yeon Sik Jung
Publisher:
ISBN:
Category :
Languages : en
Pages : 171

View

Book Description
(Cont.) For example, arrays of parallel lines were used as a mask to pattern poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) conducting polymer thin films. The resulting PEDOT:PSS nanowire array was used as an chemiresistive-type ethanol-sensing device. Metallic films such as Ti, Pt, Ta, W, and magnetic Co and Ni were structured using a pattern-reversal process. Coercivity enhancements were observed for the fabricated ferromagnetic nanostructures such as wires, rings, and antidots. These functional nanostructures can be utilized for a variety of devices such as high-density and high performance sensor or memory devices.

Author: Li-Chen Cheng (Ph.D.)
Publisher:
ISBN:
Category :
Languages : en
Pages : 188

View

Book Description
Self-assembly of block copolymers (BCPs) is emerging as a promising route for numerous technological applications to fabricate a variety of nanoscopic structures. The resulting feature sizes range from a few to several hundred nanometers, and are readily tunable by varying the molecular weights of block copolymers. Directed self-assembly of block copolymer is an effective way to pattern periodic arrays of features with long-range order, to generate complex patterns, and to multiplicatively increase the pattern density and resolution that are far beyond the limit of conventional lithography. Despite of the significant progress in the area of directed self-assembly in recent years, critical research problems regarding the dimension scalability toward sub-10-nm regime and large feature sizes on hundreds of nanometers scale as well as the capability of generating complex device-oriented patterns remain challenging. In this thesis, BCP systems, including high-v BCPs that are capable of self-assembling into extreme small and large feature sizes as well as those with more complex block architectures, are identified and studied in order to understand how those materials may be processed and directed selfassembly to bridge the patterning size spectrum between nano- and micro-fabrication. Another focus is placed on the scientific exploration of directed self-assembly of triblock terpolymers and the investigation on the mechanisms that regulate the scaling and geometry of self-assembled patterns. A comprehensive understanding about self-assembly of BCP thin films will enable developing device-oriented geometries, manipulating BCPs phase behavior, and incorporating new functional materials for a wider range of applications. In the meanwhile, optimizing the processing condition of self-assembly of various BCPs is essential to confirm viability of the directed self-assembly of block copolymers process in manufacturing.

Author: Benjamin R. Magruder
Publisher: American Chemical Society
ISBN: 0841299226
Category : Science
Languages : en
Pages : 197

View

Book Description
This primer introduces the theory of self-assembly of block polymers, most notably self-consistent field theory (SCFT). Block polymer self-assembly is a fascinating and highly interdisciplinary topic. This primer can be read at several levels, depending on what readers want to get out of it. Readers who want an overview of self-assembly in block polymer and what SCFT says about the process can read Chapters 1-3 and skip to Chapter 7 to see the open questions. If the reader is further interested in the output of SCFT calculations but not how those outputs are generated, they should read Chapter 6 as well. But if the reader wants to learn how to do the SCFT calculations themselves, Chapters 4 and 5 offer an accessible introduction to the theory and numerical methods, providing an excellent entry point into the literature. This primer includes data that the authors have computed using SCFT. All calculations use the open-source software package Polymer Self-Consistent Field (PSCF), developed by David Morse at the University of Minnesota. Take breaks from reading to watch ten “Insider Q&A” videos included throughout, which offer additional insight from experts in the field, such as An-Chang Shi, Chinedum O. Osuji, Frank S. Bates, Christopher M. Bates, Glenn H. Fredrickson, and Lisa Hall. Furthermore, this primer includes multiple features to aid and enhance readers’ learning. “That’s a Wrap” summarizes key concepts at the end of each chapter, while “Read These Next” suggests references that may interest further reading. A pop-up glossary ensures readers have definitions as needed throughout the primer.

Author: P. Alexandridis
Publisher: Elsevier
ISBN: 0080527108
Category : Science
Languages : en
Pages : 449

View

Book Description
It is the belief of the editors of this book that the recognition of block copolymers as being amphiphilic molecules and sharing common features with other well-studied amphiphiles will prove beneficial to both the surfactant and the polymer communities. An aim of this book is to bridge the two communities and cross-fertilise the different fields. To this end, leading researchers in the field of amphiphilic block copolymer self-assembly, some having a background in surfactant chemistry, and others with polymer physics roots, have agreed to join forces and contribute to this book.The book consists of four entities. The first part discusses theoretical considerations behind the block copolymer self-assembly in solution and in the melt. The second part provides case studies of self-assembly in different classes of block copolymers (e.g., polyethers, polyelectrolytes) and in different environments (e.g., in water, in non-aqueous solvents, or in the absence of solvents). The third part presents experimental tools, ranging from static (e.g., small angle neutron scattering) to dynamic (e.g., rheology), which can prove valuable in the characterization of block copolymer self-assemblies. The fourth part offers a sampling of current applications of block copolymers in, e.g., formulations, pharmaceutics, and separations, applications which are based on the unique self-assembly properties of block copolymers.

Author: Ian W. Hamley
Publisher: John Wiley & Sons
ISBN:
Category : Science
Languages : en
Pages : 312

View

Book Description
This unique text discusses the solution self-assembly of block copolymers and covers all aspects from basic physical chemistry to applications in soft nanotechnology. Recent advances have enabled the preparation of new materials with novel self-assembling structures, functionality and responsiveness and there have also been concomitant advances in theory and modelling. The present text covers the principles of self-assembly in both dilute and concentrated solution, for example micellization and mesophase formation, etc., in chapters 2 and 3 respectively. Chapter 4 covers polyelectrolyte block copolymers - these materials are attracting significant attention from researchers and a solid basis for understanding their physical chemistry is emerging, and this is discussed. The next chapter discusses adsorption of block copolymers from solution at liquid and solid interfaces. The concluding chapter presents a discussion of selected applications, focussing on several important new concepts. The book is aimed at researchers in polymer science as well as industrial scientists involved in the polymer and coatings industries. It will also be of interest to scientists working in soft matter self-assembly and self-organizing polymers.

Author: Wubin Bai
Publisher:
ISBN:
Category :
Languages : en
Pages : 136

View

Book Description
Block copolymers microphase separate to form periodic patterns with period of a few nm and above without the need for lithographic guidance. These self-assembled nanostructures have a variety of bulk geometries (alternating lamellae, gyroids, cylinder or sphere arrays, tiling patterns, core-shell structures) depending on the molecular architecture of the polymer and the volume fraction of its blocks. And in thin films, surface interaction and commensurability effect influence the self-assembly and result in more diverse morphologies including hexagonal-packed perforated lamellae, square array of holes. The progress of self-assembly can be tracked in situ using Grazing Incidence Small Angle X-ray Scattering, and the annealed morphology can be revealed in 3D using TEM tomography. Moreover, non-bulk morphologies can be produced, the ordering of the microdomains can be improved and their locations directed using various templates and processing strategies. The blocks can themselves constitute a functional material, such as a photonic crystal, or they can be used as a mask to pattern other functional materials, functionalized directly by various chemical approaches, or used as a scaffold to assemble nanoparticles or other nanostructures. Block copolymers therefore offer tremendous flexibility in creating nanostructured materials with a range of applications in microelectronics, photovoltaics, filtration membranes and other devices.

Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

View

Book Description
Directed self-assembly (DSA) of block copolymers is an emergent technique for nano-lithography, but is limited in the range of structures possible in a single fabrication step. We expand on traditional DSA chemical patterning. Moreover, a blend of lamellar- and cylinder-forming block copolymers assembles on specially designed surface chemical line gratings, leading to the simultaneous formation of coexisting ordered morphologies in separate areas of the substrate. The competing energetics of polymer chain distortions and chemical mismatch with the substrate grating bias the system towards either line/space or dot array patterns, depending on the pitch and linewidth of the prepattern. This contrasts with typical DSA, wherein assembly of a single-component block copolymer on chemical templates generates patterns of either lines/spaces (lamellar) or hexagonal dot arrays (cylinders). In our approach, the chemical template encodes desired local spatial arrangements of coexisting design motifs, self-assembled from a single, sophisticated resist.

Author: Li Yao
Publisher:
ISBN:
Category : Block copolymers
Languages : en
Pages : 150

View

Book Description
This dissertation explores the use of block copolymers which can self-assemble into different morphologies as templates to fabricate nanostructured materials. The first section (Chapters 2-4) reports the formation of mesoporous silica films with spherical, cylindrical and bicontinuous pores up to 40 nm in diameter through replicating the morphologies of the solid block copolymer (BCP) templates, polystyrene-b-poly(tert-butyl acrylate) (PS-b-PtBA), via phase selective condensation of tetraethylorthosilicate in supercritical CO2. Next, directed self-assembly was used to control the orientation of cylindrical domains in PS-b-PtBA templates. Large-area aligned mesochannels in silica films with diameters tunable between 5 and 30 nm were achieved through the replication of oriented templates via scCO2 infusion. The long-range alignment of mesochannels was confirmed through GISAXS with sample stage azimuthal rotation. In the second section (Chapters 5-6), enantiopure tartaric acid was used as an additive to dramatically improve ordering in poly(ethylene oxide-block-tert-butyl acrylate) (PEO-b-PtBA) copolymers. Transmission electron microscopy (TEM), atomic force microscopy (AFM) and X-ray scattering were used to study the phase behavior and morphologies within both bulk and thin films. With the addition of a photo acid generator, photo-induced disorder in the PEO-b-PtBA/tartaric acid composite system was achieved upon UV exposure which deprotected the PtBA block to yield poly(acrylic acid) (PAA), which is phase-miscible with PEO. Area-selective UV exposure using a photo-mask was applied with the assistance of trace amounts of base quencher to achieve high-resolution hierarchical patterns. Helical superstructures were observed by TEM in this BCP/chiral additive system with 3D handedness confirmed by TEM tomography. In the last section (Chapter 7), ultra-high loadings of nanoparticles into target domains of block copolymer composites were achieved by blending the block copolymer hosts with small molecule additives that exhibit strong interactions with one of the polymer chain segments and with the nanoparticle ligands via hydrogen bonding. The addition of 40 wt% D-tartaric acid to poly(ethylene oxide-block-tert-butyl acrylate) (PEO-b-PtBA) enabled the loading of up to 150 wt% of 4-hydroxythiophenol functionalized Au nanoparticles relative to the mass of the target hydrophilic domain. This was equivalent to over 40% Au by mass of the resulting well ordered composite as measured by thermal gravimetric analysis.

Author: Katsuhiko Ariga
Publisher: American Scientific Publishers
ISBN: 9781588830838
Category : Technology & Engineering
Languages : en
Pages : 496

View

Book Description

Author: Samuel Mospens Nicaise
Publisher:
ISBN:
Category :
Languages : en
Pages : 96

View

Book Description
This thesis discusses the investigation of various aspects of templated self-assembly of block copolymer (BCP) thin films for nanofeature fabrication. Two chapters outline the research of a combined physical and chemical templating method with two BCPs. The method was not effective in templating poly(styrene-block-methyl methacrylate) (PS-b-PMMA) BCP because of limited template wettability. The method effectively templated poly(octofluro pentamethacrylate-block-hydroxystyrene) (OFPMA-b-HSM) BCP to fabricate orthogonally-directed lamellar microdomains and nanohole-mesh arrays. Chapter 4 discusses the achievement of a mean overlay accuracy of 52 nm and 0' for two electron-beam-based lithographic features as a result of an investigated overlay process. Lastly, the thesis reports the fabrication of a wide-range of nanofeatures - from two-dimensional and three dimensional nanoholes arrays to elliptical and cylindrical meshes - by the sacrificial-post templating method with poly(styreneblock- dimethylsiloxane) (PS-b-PDMS) BCP.