Technical Manual Tm 3-34.43 (Fm 5-472) Mcrp 3-17.7h Navfac Mo 330 Afh 32-1034 Materials Testing May 2015 PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Technical Manual Tm 3-34.43 (Fm 5-472) Mcrp 3-17.7h Navfac Mo 330 Afh 32-1034 Materials Testing May 2015 PDF full book. Access full book title Technical Manual Tm 3-34.43 (Fm 5-472) Mcrp 3-17.7h Navfac Mo 330 Afh 32-1034 Materials Testing May 2015 by United States Government U. S. Army. Download full books in PDF and EPUB format.
Author: United States Government U. S. Army Publisher: Createspace Independent Publishing Platform ISBN: 9781548795962 Category : Languages : en Pages : 340
Book Description
Materials Testing provides the technical information necessary for military personnel to obtain samples and perform engineering tests and calculations on soils, bituminous paving mixtures, and concrete. These tests and calculations are required to achieve proper design with soils, bituminous paving mixtures, and concrete and to achieve adequate control over their use in military construction. This manual covers soils, aggregates, bituminous cements, bituminous paving mixtures, portland cement concrete, and stabilized soil, including stabilizing agents (bitumens, cements, lime, fly ash, chemical modifiers). It gives detailed instructions for taking adequate representative test samples and step-by-step procedures for making physical-properties tests and for recording, calculating, and evaluating test results. This manual explains methods for designing bituminous paving mixtures and stabilizing soil. It also gives the procedures and tests required to control the manufacturing of these mixtures. It describes the tools and equipment needed for performing tests and contains general instructions for the care, calibration, and use of test equipment. This manual is adopted for use by the United States Marine Corps (USMC), United States Navy (USN), United States Air Force (USAF) personnel. Certain tests and procedures prescribed differ in principle or method and are more detailed than counterpart tests that are currently required by the U.S. Navy for new construction at Navy installations (including those in forward areas). The USMC engineer units perform field identification testing only. The USMC does not possess the tools or facilities required to perform the more deliberate laboratory tests described in parts of this publication. The test procedures and terminology used in this manual conform to the latest methods and specifications of the American Society for Testing and Materials (ASTM), the American Concrete Institute, and the Portland Cement Association (PCA). The tests in this manual also apply to arctic construction. However, cold-weather effects present different problems and additional tests will be required for correct evaluation of the materials. These additional tests and considerations associated with arctic construction are in TM 5-349.
Author: United States Government U. S. Army Publisher: Createspace Independent Publishing Platform ISBN: 9781548795962 Category : Languages : en Pages : 340
Book Description
Materials Testing provides the technical information necessary for military personnel to obtain samples and perform engineering tests and calculations on soils, bituminous paving mixtures, and concrete. These tests and calculations are required to achieve proper design with soils, bituminous paving mixtures, and concrete and to achieve adequate control over their use in military construction. This manual covers soils, aggregates, bituminous cements, bituminous paving mixtures, portland cement concrete, and stabilized soil, including stabilizing agents (bitumens, cements, lime, fly ash, chemical modifiers). It gives detailed instructions for taking adequate representative test samples and step-by-step procedures for making physical-properties tests and for recording, calculating, and evaluating test results. This manual explains methods for designing bituminous paving mixtures and stabilizing soil. It also gives the procedures and tests required to control the manufacturing of these mixtures. It describes the tools and equipment needed for performing tests and contains general instructions for the care, calibration, and use of test equipment. This manual is adopted for use by the United States Marine Corps (USMC), United States Navy (USN), United States Air Force (USAF) personnel. Certain tests and procedures prescribed differ in principle or method and are more detailed than counterpart tests that are currently required by the U.S. Navy for new construction at Navy installations (including those in forward areas). The USMC engineer units perform field identification testing only. The USMC does not possess the tools or facilities required to perform the more deliberate laboratory tests described in parts of this publication. The test procedures and terminology used in this manual conform to the latest methods and specifications of the American Society for Testing and Materials (ASTM), the American Concrete Institute, and the Portland Cement Association (PCA). The tests in this manual also apply to arctic construction. However, cold-weather effects present different problems and additional tests will be required for correct evaluation of the materials. These additional tests and considerations associated with arctic construction are in TM 5-349.
Author: United States Army Publisher: Createspace Independent Publishing Platform ISBN: 9781541021907 Category : Languages : en Pages : 342
Book Description
Training Manual TM 3-34.43 (FM 5-472) MCRP 3-17.7H NAVFAC MO 330 AFH 32-1034 Materials Testing April 2015 Materials Testing provides the technical information necessary for military personnel to obtain samples and perform engineering tests and calculations on soils, bituminous paving mixtures, and concrete. These tests and calculations are required to achieve proper design with soils, bituminous paving mixtures, and concrete and to achieve adequate control over their use in military construction. This manual covers soils, aggregates, bituminous cements, bituminous paving mixtures, portland cement concrete, and stabilized soil, including stabilizing agents (bitumens, cements, lime, fly ash, chemical modifiers). It gives detailed instructions for taking adequate representative test samples and step-by-step procedures for making physical-properties tests and for recording, calculating, and evaluating test results. This manual explains methods for designing bituminous paving mixtures and stabilizing soil. It also gives the procedures and tests required to control the manufacturing of these mixtures. It describes the tools and equipment needed for performing tests and contains general instructions for the care, calibration, and use of test equipment. This manual is adopted for use by the United States Marine Corps (USMC), United States Navy (USN), United States Air Force (USAF) personnel. Certain tests and procedures prescribed differ in principle or method and are more detailed than counterpart tests that are currently required by the U.S. Navy for new construction at Navy installations (including those in forward areas). The USMC engineer units perform field identification testing only. The USMC does not possess the tools or facilities required to perform the more deliberate laboratory tests described in parts of this publication. The test procedures and terminology used in this manual conform to the latest methods and specifications of the American Society for Testing and Materials (ASTM), the American Concrete Institute, and the Portland Cement Association (PCA). The tests in this manual also apply to arctic construction. However, cold-weather effects present different problems and additional tests will be required for correct evaluation of the materials. These additional tests and considerations associated with arctic construction are in TM 5-349.
Author: Department of the Army Publisher: Createspace Independent Pub ISBN: 9781481114431 Category : History Languages : en Pages : 400
Book Description
Field Manual (FM) 5-472, “Materials Testing,” provides the technical information necessary for military personnel to obtain sample and perform engineering tests and calculations on soils, bituminous paving mixtures, and concrete. These tests and calculations are required to achieve proper design with these materials and adequate control of their use in military construction. This manual covers soils, aggregates, bituminous cements, bituminous paving mixtures, Portland-cement concrete, and stabilized soils including stabilizing agents such as bitumens, cements, lime, fly ash, and chemical modifiers. The manual gives detailed instructions for taking adequate representative test samples and step-by-step procedures for making physical-properties tests and for recording, calculating, and evaluating test results. The manual explains methods for designing bituminous paving mixtures and for stabilizing soil. It also gives the procedures and tests required to control the manufacture of these mixtures. The manual describes the tools and equipment for performing these tests and contains general instructions for the care, calibration, and use of test equipment.
Author: United States Government U. S. Army
Author: United States Government U. S. Army
Author: United States Army
Author: Department of the Army