System Design and Performance Comparison of Blended Gasoline/ethanol Fuels in Semi-direct and Direct Injected Two-stroke Engines PDF Download

Author: Nicholas J. Harker
Publisher:
ISBN:
Category : Alcohol
Languages : en
Pages : 112

View

Book Description

Author: Jay Meldrum
Publisher: SAE International
ISBN: 0768084024
Category : Technology & Engineering
Languages : en
Pages : 94

View

Book Description
This collection is a resource for studying the history of the evolving technologies that have contributed to snowmobiles becoming cleaner and quieter machines. Papers address design for a snowmobile using the EPA test procedure and standard for off-road vehicles, along with more stringent U.S. National Park Best Available Technology (BAT) standards that are likened to those of the California Air Resourced Board (CARB). Innovative technology solutions include: • Standard application for diesel engine designs • Applications to address and test both engine and track noise • Benefits of the Miller cycle and turbocharging The SAE International Clean Snowmobile Challenge (CSC) program is an engineering design competition. The program provides undergraduate and graduate students the opportunity to enhance their engineering design and project management skills by reengineering a snowmobile to reduce emissions and noise. The competition includes internal combustion engine categories that address both gasoline and diesel, as well as the zero emissions category in which range and draw bar performance are measured. The goal of the competition is designing a cleaner and quieter snowmobile. The competitors’ modified snowmobiles are also expected to be cost-effective and comfortable for the operator to drive.

Author: Wadysaw Mitianiec
Publisher: Nova Science Publishers
ISBN: 9781536124729
Category : Technology & Engineering
Languages : en
Pages : 0

View

Book Description
The main goal of the book is the presentation of the last theoretical and experimental works concerning fuel injection systems, mainly in small power two-stroke engines as well as in marine engines. This book includes thirteen chapters devoted to the processes of fuel injection and the combustion that takes place in a stratified charge within the cylinders of two-stroke engines. In the first two chapters, the division into different injection systems in two-stroke engines and each injection system is briefly described. Various theoretical and practical solutions of fueling system designs are described. In Chapter Three, mathematical models, the spatial movement of gas in the cylinder and the combustion chamber are introduced, taking into account the turbulence of the charge. Chapter Four relates to the behavior of fuel injected into the gaseous medium, including evaporation processes, disintegration and processes occurring while the fuel drops connect with the wall. The next section describes the zero-dimensional model of fuel injection in two-stroke engines along with examples of numerical calculations. The sixth chapter is devoted to CFD multi-dimensional models of movement and evaporation of the fuel in a closed gaseous medium, occurring also in other engine types. Chapter Seven describes a two-zone model of the combustion process and the effect of the geometry of the combustion chamber on the flame propagation with a simplified verification model of combustion. Chapter Eight compares the propagation phase of gas and liquid fuels concerning direct fuel injection as well as the direct fuel injection from the cylinder head and the thermodynamic parameters of the charge. The formation of the components during the combustion process in the direct fuel injection two-stroke engine was obtained by numerical calculations and results are discussed in Chapter Nine. Chapter Ten describes the parameters of the two-stroke engine with a direct fuel injection carried out at the Cracow University of Technology. Additionally, the chapter presents CFD simulations of fuel propagation and combustion processes, taking into account the formation of toxic components and exhaust gas emission. The processes of two direct rich mixture injection systems FAST and RMIS developed in CUT are presented in Chapter Eleven. Miscellaneous problems of direct fuel injection, such as characteristics of fuel injectors, problems of direct gaseous fuel injection, and the application of fuelling systems in outboard engines and snowmobile vehicles are presented in Chapter Twelve. A comparison of working parameters in two- and four stroke engines is also mapped out. The last chapters contain the final conclusions and remarks concerning fuel injection and emission of exhaust gases in small two-stroke engines. This book is a comprehensive monograph on fuel injection. The author presents a series of theoretical and design information from his own experience and on the basis of the works of other authors. The main text intends to direct fuel injection with respect to gas motion in the combustion chamber and influence the injection parameters for exhaust emission. The book presents its own theoretical work and experimental tests concerning a two-stroke gasoline engine with electrically controlled direct fuel injection. The book describes the processes of a general nature also occurring in other types of engines and presents a comparison of different injection systems on working parameters and gas emission. The book contains 294 images, 290 equations and 16 tables obtained from the CFD simulation and experimental works.

Author: Władysław Mitianiec
Publisher:
ISBN: 9781536129410
Category : Two-stroke cycle engines
Languages : en
Pages :

View

Book Description

Author:
Publisher:
ISBN:
Category : Gasoline
Languages : en
Pages : 80

View

Book Description

Author: Hua Zhao
Publisher: CRC Press
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 562

View

Book Description
Homogeneous charge compression ignition (HCCI)/controlled auto-ignition (CAI) has emerged as one of the most promising engine technologies with the potential to combine fuel efficiency and improved emissions performance, offering reduced nitrous oxides and particulate matter alongside efficiency comparable with modern diesel engines. Despite the considerable advantages, its operational range is rather limited and controlling the combustion (timing of ignition and rate of energy release) is still an area of on-going research. Commercial applications are, however, close to reality. HCCI a.

Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

View

Book Description
Ethanol is a very attractive fuel from an end-use perspective because it has a high chemical octane number and a high latent heat of vaporization. When an engine is optimized to take advantage of these fuel properties, both efficiency and power can be increased through higher compression ratio, direct fuel injection, higher levels of boost, and a reduced need for enrichment to mitigate knock or protect the engine and aftertreatment system from overheating. The ASTM D5798 specification for high level ethanol blends, commonly called E85, underwent a major revision in 2011. The minimum ethanol content was revised downward from 68 vol% to 51 vol%, which combined with the use of low octane blending streams such as natural gasoline introduces the possibility of a lower octane E85 fuel. While this fuel is suitable for current ethanol tolerant flex fuel vehicles, this study experimentally examines whether engines can still be aggressively optimized for the resultant fuel from the revised ASTM D5798 specification. The performance of six ethanol fuel blends, ranging from 51-85% ethanol, is compared to a premium-grade certification gasoline (UTG-96) in a single-cylinder direct-injection (DI) engine with a compression ratio of 12.9:1 at knock-prone engine conditions. UTG-96 (RON = 96.1), light straight run gasoline (RON = 63.6), and n-heptane (RON = 0) are used as the hydrocarbon blending streams for the ethanol-containing fuels in an effort to establish a broad range of knock resistance for high ethanol fuels. Results show that nearly all ethanol-containing fuels are more resistant to engine knock than UTG-96 (the only exception being the ethanol blend with 49% n-heptane). This knock resistance allows ethanol blends made with 33 and 49% light straight run gasoline, and 33% n-heptane to be operated at significantly more advanced combustion phasing for higher efficiency, as well as at higher engine loads. While experimental results show that the octane number of the hydrocarbon blend stock does impact engine performance, there remains a significant opportunity for engine optimization when considering even the lowest octane fuels that are in compliance with the current revision of ASTM D5798 compared to premium-grade gasoline.

Author: F. Zhao
Publisher: Elsevier
ISBN: 008055279X
Category : Technology & Engineering
Languages : en
Pages : 129

View

Book Description
The process of fuel injection, spray atomization and vaporization, charge cooling, mixture preparation and the control of in-cylinder air motion are all being actively researched and this work is reviewed in detail and analyzed. The new technologies such as high-pressure, common-rail, gasoline injection systems and swirl-atomizing gasoline fuel injections are discussed in detail, as these technologies, along with computer control capabilities, have enabled the current new examination of an old objective; the direct-injection, stratified-charge (DISC), gasoline engine. The prior work on DISC engines that is relevant to current GDI engine development is also reviewed and discussed. The fuel economy and emission data for actual engine configurations have been obtained and assembled for all of the available GDI literature, and are reviewed and discussed in detail. The types of GDI engines are arranged in four classifications of decreasing complexity, and the advantages and disadvantages of each class are noted and explained. Emphasis is placed upon consensus trends and conclusions that are evident when taken as a whole; thus the GDI researcher is informed regarding the degree to which engine volumetric efficiency and compression ratio can be increased under optimized conditions, and as to the extent to which unburned hydrocarbon (UBHC), NOx and particulate emissions can be minimized for specific combustion strategies. The critical area of GDI fuel injector deposits and the associated effect on spray geometry and engine performance degradation are reviewed, and important system guidelines for minimizing deposition rates and deposit effects are presented. The capabilities and limitations of emission control techniques and after treatment hardware are reviewed in depth, and a compilation and discussion of areas of consensus on attaining European, Japanese and North American emission standards presented. All known research, prototype and production GDI engines worldwide are reviewed as to performance, emissions and fuel economy advantages, and for areas requiring further development. The engine schematics, control diagrams and specifications are compiled, and the emission control strategies are illustrated and discussed. The influence of lean-NOx catalysts on the development of late-injection, stratified-charge GDI engines is reviewed, and the relative merits of lean-burn, homogeneous, direct-injection engines as an option requiring less control complexity are analyzed.

Author: Gordon Blair
Publisher: SAE International
ISBN: 0768025168
Category : Technology & Engineering
Languages : en
Pages : 656

View

Book Description
Design and Simulation of Two-Stroke Engines is a unique hands-on information source. The author, having designed and developed many two-stroke engines, offers practical and empirical assistance to the engine designer on many topics ranging from porting layout, to combustion chamber profile, to tuned exhaust pipes. The information presented extends from the most fundamental theory to pragmatic design, development, and experimental testing issues. Chapters cover: Introduction to the Two-Stroke Engine Combustion in Two-Stroke Engines Computer Modeling of Engines Reduction of Fuel Consumption and Exhaust Emissions Reduction of Noise Emission from Two-Stroke Engines and more

Author: Marco P. Nuti
Publisher: SAE International
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 310

View

Book Description
""In the design of new CI engines, it is of paramount importance to reduce the pollutants and fuel consumption,"" writes author Marco Nuti. In this, the first book devoted entirely to exhaust emissions from two-stroke engines, Nuti examines the technical design issues that will determine how long the two-stroke engine survives into the twenty-first century. Dr. Nuti, director of Technical Innovation at Piaggio, thoroughly explores pollutant formation and control from unburned hydrocarbon emissions, carbon monoxide emissions, catalytic aftertreatment, and secondary air addition.