Supply Chain Sustainability Analysis of Renewable Hydrocarbon Fuels via Indirect Liquefaction, Fast Pyrolysis, and Hydrothermal Liquefaction: Update of the 2016 State-of-Technology Cases and Design Cases PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Supply Chain Sustainability Analysis of Renewable Hydrocarbon Fuels via Indirect Liquefaction, Fast Pyrolysis, and Hydrothermal Liquefaction: Update of the 2016 State-of-Technology Cases and Design Cases PDF full book. Access full book title Supply Chain Sustainability Analysis of Renewable Hydrocarbon Fuels via Indirect Liquefaction, Fast Pyrolysis, and Hydrothermal Liquefaction: Update of the 2016 State-of-Technology Cases and Design Cases by . Download full books in PDF and EPUB format.
Author: Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This technical memorandum describes the supply chain sustainability analyses (SCSA) for the production of three renewable hydrocarbon transportation fuels: (1) renewable high octane gasoline (HOG) via indirect liquefaction (IDL) of woody lignocellulosic biomass; (2) renewable gasoline (RG) via fast pyrolysis of woody lignocellulosic biomass; and (3) renewable diesel via hydrothermal liquefaction of algae. This technical memorandum focuses on the 2016 State of Technology (SOT) technical, economic, and environmental performance of these three fuel production pathways, as well as the 2016 SOT woody feedstock blend production and the 2016 SOT for algae feedstock production. The results of these renewable hydrocarbon fuel pathways in these SCSA analyses update those for the respective 2015 SOT cases (Cai et al., 2016; Adom et al., 2016; Frank et al., 2016), and provide an opportunity to examine the impact of technology improvements of both biomass feedstock production and biofuel production that have been achieved since the 2015 SOTs on the sustainability performance of these renewable transportation fuels. Furthermore, they reflect updates to Argonne National Laboratory's Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET[R]) model, which was released in October 2016 (ANL, 2016). The 2015 SOT case was re-evaluated using this newly-released version, which includes updates to the production of natural gas, electricity, and liquid fuels that can influence biofuels' supply chain greenhouse gas (GHG) (CO2, CH4, and N2O) emissions. These emissions and water consumption are the two sustainability metrics assessed in this analysis. The design cases (future target projections) for these three fuel production pathways were also re-evaluated using GREET 2016. In particular, the 2016 woody blend feedstock SOT was used in lieu of the previous design case woody blend feedstock, which utilized construction and demolition waste (INL, 2014). In the 2016 woody blend feedstock SOT, the construction and demolition waste was eliminated due to a lack of Renewable Identification Number (RINs) generation, and replaced with short rotation hybrid poplar in order to align with the woody feedstock blend that was chosen by the BETO Feedstock-Conversion Interface Consortium (FCIC) for the 2017 fast pyrolysis verification.
Author: Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This technical memorandum describes the supply chain sustainability analyses (SCSA) for the production of three renewable hydrocarbon transportation fuels: (1) renewable high octane gasoline (HOG) via indirect liquefaction (IDL) of woody lignocellulosic biomass; (2) renewable gasoline (RG) via fast pyrolysis of woody lignocellulosic biomass; and (3) renewable diesel via hydrothermal liquefaction of algae. This technical memorandum focuses on the 2016 State of Technology (SOT) technical, economic, and environmental performance of these three fuel production pathways, as well as the 2016 SOT woody feedstock blend production and the 2016 SOT for algae feedstock production. The results of these renewable hydrocarbon fuel pathways in these SCSA analyses update those for the respective 2015 SOT cases (Cai et al., 2016; Adom et al., 2016; Frank et al., 2016), and provide an opportunity to examine the impact of technology improvements of both biomass feedstock production and biofuel production that have been achieved since the 2015 SOTs on the sustainability performance of these renewable transportation fuels. Furthermore, they reflect updates to Argonne National Laboratory's Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET[R]) model, which was released in October 2016 (ANL, 2016). The 2015 SOT case was re-evaluated using this newly-released version, which includes updates to the production of natural gas, electricity, and liquid fuels that can influence biofuels' supply chain greenhouse gas (GHG) (CO2, CH4, and N2O) emissions. These emissions and water consumption are the two sustainability metrics assessed in this analysis. The design cases (future target projections) for these three fuel production pathways were also re-evaluated using GREET 2016. In particular, the 2016 woody blend feedstock SOT was used in lieu of the previous design case woody blend feedstock, which utilized construction and demolition waste (INL, 2014). In the 2016 woody blend feedstock SOT, the construction and demolition waste was eliminated due to a lack of Renewable Identification Number (RINs) generation, and replaced with short rotation hybrid poplar in order to align with the woody feedstock blend that was chosen by the BETO Feedstock-Conversion Interface Consortium (FCIC) for the 2017 fast pyrolysis verification.
Author: Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This technical report describes the supply chain sustainability analysis (SCSAs) for the production of renewable hydrocarbon transportation fuels via a range of conversion technologies: (1) renewable high octane gasoline (HOG) via indirect liquefaction (IDL) of woody lignocellulosic biomass (note that the IDL pathway in this SCSA represents the syngas conversion design in the 2019 SOT [Tan et al. 2019]); (2) renewable gasoline (RG) and diesel (RD) blendstocks via ex situ catalytic fast pyrolysis of woody lignocellulosic biomass; (3) RD via hydrothermal liquefaction (HTL) of wet sludge from a wastewater treatment plant; (4) renewable hydrocarbon fuels via biochemical conversion of herbaceous lignocellulosic biomass; (5) renewable diesel via HTL of a blend of algae and woody biomass; and (6) renewable diesel via combined algae processing (CAP). This technical report focuses on the environmental performance of these six biofuel production pathways in their 2019 SOT cases. The results of these renewable hydrocarbon fuel pathways in these SCSA analyses update those for the respective 2018 SOT cases (Cai et al., 2018a). They also provide an opportunity to examine the impact of technology improvements in both biomass feedstock production and biofuel production that have been achieved in 2019 SOTs on the sustainability performance of these renewable transportation fuels, and they reflect updates to Argonne National Laboratory's Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET®) model, which was released in October 2019 (Wang et al., 2019). These GREET updates include the production of natural gas, electricity, and petroleum-based fuels that can influence biofuels' supply chain greenhouse gas (GHG) (CO2, CH4, and N2O) emissions, water consumption, and air pollutant emissions. GHG emissions, water consumption, and nitrogen oxides (NO x) emissions are the main sustainability metrics assessed in this analysis. In this analysis, we define water consumption as the amount of water withdrawn from a freshwater source that is not returned (or returnable) to a freshwater source at the same level of quality. Life-cycle fossil energy consumption and net energy balance, which is the life-cycle fossil energy consumption deducted from the renewable biofuel energy produced, are also assessed.
Author: Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This technical report describes the SCSAs for the production of renewable hydrocarbon transportation fuels via a range of conversion technologies: (1) renewable high octane gasoline (HOG) via indirect liquefaction (IDL) of woody lignocellulosic biomass (note that the IDL pathway in this SCSA represents the syngas conversion design in the 2018 SOT and 2022 design cases [Tan et al., 2018]); (2) renewable gasoline (RG) and diesel (RD) blendstocks via ex situ catalytic fast pyrolysis of woody lignocellulosic biomass; (3) RD via hydrothermal liquefaction (HTL) of wet sludge from a wastewater treatment plant; (4) renewable hydrocarbon fuels via biochemical conversion of herbaceous lignocellulosic biomass; (5) renewable diesel via HTL of a blend of algae and woody biomass; and (6) renewable diesel via combined algae processing (CAP). This technical report focuses on the environmental performance of these six biofuel production pathways in their 2018 SOT cases, as well as in their design cases (future target projections). The results of these renewable hydrocarbon fuel pathways in these SCSA analyses update those for the respective 2015 and 2016 SOT cases (Edward Frank et al. 2016; Hao Cai et al. 2016, 2017; Cai et al. 2018) in the case of IDL, algae CAP, and biochemical conversion pathways. They also provide an opportunity to examine the impact of technology improvements in both biomass feedstock production and biofuel production that have been achieved in 2018 SOTs on the sustainability performance of these renewable transportation fuels, and they reflect updates to Argonne National Laboratory's Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET[R]) model, which was released in October 2018 (Wang et al. 2018). These GREET updates include production of natural gas, electricity, and petroleum-based fuels that can influence biofuels' supply chain greenhouse gas (GHG) (CO2, CH4, and N2O) emissions, water consumption and air pollutant emissions. GHG emissions, water consumption, and 2 nitrogen oxides (NOx) emissions are the main sustainability metrics assessed in this analysis. In this analysis, we define water consumption as the amount of water withdrawn from a freshwater source that is not returned (or returnable) to a freshwater source at the same level of quality. Life-cycle fossil energy consumption and net energy balance, which is the life-cycle fossil energy consumption deducted from the renewable biofuel energy produced, are also assessed.
Author: Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
The Department of Energy's (DOE's) Bioenergy Technologies Office (BETO) aims to develop and deploy technologies to transform renewable biomass resources into commercially viable, high-performance biofuels, bioproducts, and biopower through public and private partnerships (U.S. Department of Energy, 2016). BETO and its national laboratory teams conduct in-depth techno-economic assessments (TEA) of biomass feedstock supply and logistics and conversion technologies to produce biofuels. There are two general types of TEAs: A design case is a TEA that outlines a target case (future projection) for a particular biofuel pathway. It enables identification of data gaps and research and development needs, and provides goals and benchmarks against which technology progress is assessed. A state of technology (SOT) analysis assesses progress within and across relevant technology areas based on actual results at current experimental scales, relative to technical targets and cost goals from design cases, and includes technical, economic, and environmental criteria as available. In addition to developing a TEA for a pathway of interest, BETO also performs a supply chain sustainability analysis (SCSA). The SCSA takes the life-cycle analysis approach that BETO has been supporting for about 20 years. It enables BETO to identify energy consumption, environmental, and sustainability issues that may be associated with biofuel production. Approaches to mitigate these issues can then be developed. Additionally, the SCSA allows for comparison of energy and environmental impacts across biofuel pathways in BETO's research and development portfolio.
Author: Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
The Department of Energy's (DOE's) Bioenergy Technologies Office (BETO) aims to develop and deploy technologies to transform renewable biomass resources into commercially viable, high-performance biofuels, bioproducts, and biopower through public and private partnerships (U.S. Department of Energy, 2016). BETO and its national laboratory teams conduct in-depth techno-economic assessments (TEA) of biomass feedstock supply and logistics and conversion technologies to produce biofuels. There are two general types of TEAs: A design case is a TEA that outlines a target case (future projection) for a particular biofuel pathway. It enables identification of data gaps and research and development needs, and provides goals and benchmarks against which technology progress is assessed. A state of technology (SOT) analysis assesses progress within and across relevant technology areas based on actual results at current experimental scales, relative to technical targets and cost goals from design cases, and includes technical, economic, and environmental criteria as available. In addition to developing a TEA for a pathway of interest, BETO also performs a supply chain sustainability analysis (SCSA). The SCSA takes the life-cycle analysis approach that BETO has been supporting for about 20 years. It enables BETO to identify energy consumption, environmental, and sustainability issues that may be associated with biofuel production. Approaches to mitigate these issues can then be developed. Additionally, the SCSA allows for comparison of energy and environmental impacts across biofuel pathways in BETO's research and development portfolio.
Author: Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
The Department of Energy's (DOE) Bioenergy Technologies Office (BETO) aims to develop and deploy technologies to transform renewable biomass resources into commercially viable, high-performance biofuels, bioproducts, and biopower through public and private partnerships. BETO and its national laboratory teams conduct in-depth techno-economic assessments (TEA) of biomass feedstock supply and logistics and conversion technologies to produce biofuels. There are two general types of TEAs: A design case outlines a target case (future projection) for a particular biofuel pathway. It informs R&D priorities by identifying areas in need of improvement, tracks sustainability impact of R&D, and provides goals and benchmarks against which technology progress is assessed. A state of technology (SOT) analysis assesses progress within and across relevant technology areas based on actual results at current experimental scales relative to technical targets and cost goals from design cases, and includes technical, economic, and environmental criteria as available. In addition to developing a TEA for a pathway of interest, BETO also performs a supply chain sustainability analysis (SCSA). The SCSA takes the life-cycle analysis approach that BETO has been supporting for over 20 years. It enables BETO to identify energy consumption, environmental, and sustainability issues that may be associated with biofuel production. Approaches to mitigating these issues can then be developed. Additionally, the SCSA allows for comparison of energy and environmental impacts across biofuel pathways in BETO's research and development portfolio. This technical report describes the SCSAs for the production of renewable hydrocarbon transportation fuels via a range of conversion technologies in the 2022 SOTs: (1) renewable hydrocarbon fuels via hydrothermal liquefaction (HTL) of wet sludge from a wastewater treatment plant; (2) renewable hydrocarbon fuels via biochemical conversion of herbaceous lignocellulosic biomass; (3) renewable hydrocarbon fuels via HTL of an algae/woody biomass blend; and (4) renewable hydrocarbon fuels via combined algae processing (CAP).
Author: Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This report describes the supply chain sustainability analysis (SCSA) of renewable gasoline and diesel produced via fast pyrolysis of a blended woody feedstock. The metrics considered in this analysis include supply chain greenhouse gas (GHG) emissions and water consumption.
Author: Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
Published by Argonne National Laboratory, this report describes the supply chain sustainability analysis (SCSA) of the fast pyrolysis of two woody feedstocks, pine and forest residue, to renewable gasoline and diesel.
Author: Publisher: ISBN: Category : Languages : en Pages : 24
Book Description
The Department of Energy's (DOE) Bioenergy Technology Office (BETO) aims at developing and deploying technologies to transform renewable biomass resources into commercially viable, high-performance biofuels, bioproducts and biopower through public and private partnerships (DOE, 2015). BETO and its national laboratory teams conduct in-depth techno-economic assessments (TEA) of technologies to produce biofuels. These assessments evaluate feedstock production, logistics of transporting the feedstock, and conversion of the feedstock to biofuel. There are two general types of TEAs. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables identification of data gaps and research and development needs, and provides goals and targets against which technology progress is assessed. On the other hand, a state of technology (SOT) analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases, and includes technical, economic, and environmental criteria as available.
Author: Aiduan Borrion Publisher: Royal Society of Chemistry ISBN: 1839161361 Category : Science Languages : en Pages : 316
Book Description
Life cycle assessment (LCA) is an established methodology used to quantify the environmental impacts of products, processes and services. Circular economy (CE) thinking is conceptual way of considering the impacts of consuming resources. By taking a closed loop approach, CE provides a framework for influencing behaviours and practices to minimise this impact. Development of the circular economy is a crucial component in the progression towards future sustainability. This book provides a robust systematic approach to the circular economy concept, using the established methodology of LCA. Including chapters on circular economic thinking, the use of LCA as a metric and linking LCA to the wider circular economy, this book utilises case studies to illustrate the approaches to LCA. With contributions from researchers worldwide, Life Cycle Assessment provides a practical, global guide for those who wish to use LCA as a research tool or to inform policy, process, and product improvement.
Author: 
Author: 
Author: 
Author: 
Author: 
Author: 
Author: 
Author: 
Author: 
Author: 
Author: Aiduan Borrion