Author: Aspi Rustom WadiaPublisher:
ISBN:
Category : Finite element method
Languages : en
Pages : 120
Book Description
Studies of the Finite Element Technique for Transonic Flows with Shocks
Author: Aspi Rustom WadiaPublisher:
ISBN:
Category : Finite element method
Languages : en
Pages : 120
Book Description
Studies of the Finite Element Technique for Transonic Flows with Shock
Author: Aspi Rustom WadiaFinite Element Analysis of Subsonic Transonic, and Supersonic Flows Around Missiles
Author: T. J. ChungPublisher:
ISBN:
Category :
Languages : en
Pages : 72
Book Description
This report examines the Galerkin finite element method for solving aerodynamics problems with emphasis on transonic flows. A shock element concept was proposed and computations were carried out. In this process, a quadratic isoparametric element is divided into quadrants with each quadrant having independent trial functions. This idea allows discontinuities at the center of an element and shocks are allowed to develop freely. Rankin-Hugoniot conditions are satisfied accurately. Although this method is efficient until freesteam Mach number reaches approximately 0.95, the solution seems to deteriorate significantly for M> 0.95. Toward the end of the reporting period, the author proposed a new approach--optimal control penalty finite elements. This method is suited ideally for problems of discontinuity and shock waves as a consequence of changes in the type of partial differential equations. The resulting equations are symmetric and positive-definite, their solution being type-idependent. Numerous examples indicate that both stability and accuracy are maintained very satisfactorily for Tricomi and small perturbation equations. Detailed calculations applied to the full potential equations using this approach are beyond the scope of the present study.
Least Squares Finite Element Simulation of Transonic Flows
Author: T. F. ChenNumerical Methods for the Computation of Inviscid Transonic Flows with Shock Waves
Author: Arthur RizziPublisher: Springer-Verlag
ISBN: 3663140083
Category : Science
Languages : de
Pages : 283
Book Description
Finite Element Analysis of Transonic Flows in Cascades
Author: Akin EcerPublisher:
ISBN:
Category : Aerodynamics, Transonic
Languages : en
Pages : 116
Book Description
The finite element method is applied for the solution of transonic potential flows through a cascade of airfoils. Convergence characteristics of the solution scheme are discussed. Accuracy of the numerical solutions is investigated for various flow regions in the transonic flow configuration. The design of an efficient finite element computational grid is discussed for improving accuracy and convergence.
Numerical Computation of Transonic Flows by Finite-element and Finite-difference Methods
Author: United States. National Aeronautics and Space Administration. Scientific and Technical Information OfficePublisher:
ISBN:
Category : Aerodynamics, Transonic
Languages : en
Pages : 132
Book Description
A Least Square Finite Element Technique for Transonic Flow with Shock
Author: Aspi Rustom WadiaPublisher:
ISBN:
Category :
Languages : en
Pages : 12
Book Description
The governing differential equation for the one-dimensional, transonic flow in a laval nozzle in the vicinity of the throat was obtained in the non-dimensional form. A least square finite element technique was used with a linearly interpolating polynomial to reduce the governing equation to a system of non-linear algebraic equations which were solved numerically by Newton's method. The system of partial differential equations for the two dimensional flow in a laval nozzle was also obtained in the non-dimensional form. The method of integral relations was used to replace the original system of partial differential equations by a system of ordinary differential equations. Using the least square finite element technique a computer program was developed for the construction and solution of the non-linear equations for the laval nozzle problem. The results including the location of the shock in the flow are presented. (Author).
Least Squares Finite Element Simulation of Transonic Flows
Author: T. F. ChenFinite Element Analysis of Transonic Flows Over Thin Airfoils. Volume II. Program User's Manual
Author: H. C. ChenPublisher:
ISBN:
Category :
Languages : en
Pages : 112
Book Description
A finite element program is described for computing steady and unsteady (oscillatory and transient) transonic flows over thin airfoils by solving directly the unsteady, nonlinear transonic potential equation based on small disturbance theory. The present numerical algorithm is developed using the concept of finite elements in conjunction with the least squares method of weighted residuals applied to both space and time. The basic element presently used is a product of an element in space and an element in time. The former has a cubic expansion inside each element, while the latter is a quadratic Lagrangian element. For each time step, the finite element discretization in both space and time results in a recurrence relationship in the form of a banded system of algebraic equations, which is solved by Gaussian elimination. The embedded shocks are smeared and a matching scheme for computing effectively flow over lifting airfoils is also incorporated in the program. The present computer program is composed of two parts: the first part (designated as UTRANL-I) generates, from a limited number of input cards, the necessary mesh information and, if desired, produces a CALCOMP mesh plot; the second part (UTRANL-II) carries out the analysis and displays the pressure coefficients along the chordline on printer plots. Two sample cases of flow over a NACA 64A 410 and a NACA 64A 006 airfoils are given to demonstrate the applicability and usage of the program. Te solution procedures are found to be quite efficient and accurate, permitting the aerodynamic forces to be calculated to engineering accuracy in less than ten minutes CPU time on a CDC 6600 computer for the most time consuming case among all those studied. (Author).