Structure, Microstructure and Magnetic Properties of Electrodeposited Co and Co-Pt in Different Nanoscale Geometries PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Structure, Microstructure and Magnetic Properties of Electrodeposited Co and Co-Pt in Different Nanoscale Geometries PDF full book. Access full book title Structure, Microstructure and Magnetic Properties of Electrodeposited Co and Co-Pt in Different Nanoscale Geometries by . Download full books in PDF and EPUB format.
Author: Publisher: ISBN: Category : Languages : en Pages :
Book Description
Thin films and nanowires of Co-Pt have been prepared by means of electrodeposition. Composition, structure, microstructure and magnetic properties have been intensively studied using X-ray diffraction, scanning electron microscopy and vibrating sample magnetometry and correlated to the deposition parameters such as electrolyte composition, deposition current and/or potential. Co rich Co-Pt films have been deposited at various current densities. A nearly constant composition of Co70Pt30 was achieved for current densities between 18 and 32 mA/cm2. Detailed texture measurements confirmed an increasing fraction of the hexagonal phase with its c-axis aligned perpendicular to the film plane with increasing current density. Accordingly, magnetic properties are strongly affected by the magnetocrystalline anisotropy of the hexagonal phase that competes with the shape anisotropy of the thin film geometry. Co-Pt nanowires have been prepared within alumina templates at different deposition potentials between -0.6 and -0.9VSCE changing the composition from nearly pure Pt to Co. The composition Co80Pt20 was observed at a deposition potential of -0.7VSCE. Co-Pt nanowires are nanocrystalline in the as-deposited state. Magnetic measurements reveal changing fcc and hcp phase fractions within the wires as the effective anisotropy significantly differs from the expected shape anisotropy for nanowires with high aspect ratio. This change in effective anisotropy is attributed to the preferential alignment of the c-axis of hcp Co-Pt phase perpendicular to the nanowires axis. A promising alternative with much smaller feature sizes is the diblock copolymer template. Electrodeposition of Co and Co-Pt into these templates has been carried out. Inhomogeneities in the template thickness as well as a certain substrate roughness have been identified to be the reasons for inhomogeneous template filling. Thus magnetic properties are dominated by large deposits found on top of the template. Additiona.
Author: Publisher: ISBN: Category : Languages : en Pages :
Book Description
Thin films and nanowires of Co-Pt have been prepared by means of electrodeposition. Composition, structure, microstructure and magnetic properties have been intensively studied using X-ray diffraction, scanning electron microscopy and vibrating sample magnetometry and correlated to the deposition parameters such as electrolyte composition, deposition current and/or potential. Co rich Co-Pt films have been deposited at various current densities. A nearly constant composition of Co70Pt30 was achieved for current densities between 18 and 32 mA/cm2. Detailed texture measurements confirmed an increasing fraction of the hexagonal phase with its c-axis aligned perpendicular to the film plane with increasing current density. Accordingly, magnetic properties are strongly affected by the magnetocrystalline anisotropy of the hexagonal phase that competes with the shape anisotropy of the thin film geometry. Co-Pt nanowires have been prepared within alumina templates at different deposition potentials between -0.6 and -0.9VSCE changing the composition from nearly pure Pt to Co. The composition Co80Pt20 was observed at a deposition potential of -0.7VSCE. Co-Pt nanowires are nanocrystalline in the as-deposited state. Magnetic measurements reveal changing fcc and hcp phase fractions within the wires as the effective anisotropy significantly differs from the expected shape anisotropy for nanowires with high aspect ratio. This change in effective anisotropy is attributed to the preferential alignment of the c-axis of hcp Co-Pt phase perpendicular to the nanowires axis. A promising alternative with much smaller feature sizes is the diblock copolymer template. Electrodeposition of Co and Co-Pt into these templates has been carried out. Inhomogeneities in the template thickness as well as a certain substrate roughness have been identified to be the reasons for inhomogeneous template filling. Thus magnetic properties are dominated by large deposits found on top of the template. Additiona.
Author: Manuel Vázquez Publisher: Woodhead Publishing ISBN: 0081001819 Category : Technology & Engineering Languages : en Pages : 847
Book Description
Magnetic nanowires and microwires are key tools in the development ofenhanced devices for information technology (memory and data processing) andsensing. Offering the combined characteristics of high density, high speed, andnon-volatility, they facilitate reliable control of the motion of magnetic domainwalls; a key requirement for the development of novel classes of logic and storagedevices. Part One introduces the design and synthesis of magnetic nanowires andmicrowires, reviewing the growth and processing of nanowires and nanowireheterostructures using such methods as sol-gel and electrodepositioncombinations, focused-electron/ion-beam-induced deposition, chemicalvapour transport, quenching and drawing and magnetic interactions. Magneticand transport properties, alongside domain walls, in nano- and microwiresare then explored in Part Two, before Part Three goes on to explore a widerange of applications for magnetic nano- and microwire devices, includingmemory, microwave and electrochemical applications, in addition to thermalspin polarization and configuration, magnetocalorific effects and Bloch pointdynamics. - Detailed coverage of multiple key techniques for the growth and processing of nanowires and microwires - Reviews the principles and difficulties involved in applying magnetic nano- and microwires to a wide range of applications - Combines the expertise of specialists from around the globe to give a broad overview of current and future trends
Author: Ekkes H. Brück Publisher: Elsevier ISBN: 0128210249 Category : Technology & Engineering Languages : en Pages : 216
Book Description
Handbook of Magnetic Materials, Volume 29, highlights new advances in the field, with this new volume presenting interesting chapters written by an international board of authors on topics such as spin-orbit torque. - Provides the authority and expertise of leading contributors from an international board of authors - Presents the latest release in the Handbook of Magnetic Materials series
Author: Mahmood Aliofkhazraei Publisher: BoD – Books on Demand ISBN: 9535111493 Category : Technology & Engineering Languages : en Pages : 242
Book Description
Surface engineering can be defined as an enabling technology used in a wide range of industrial activities. Surface engineering was founded by detecting surface features which destroy most of pieces, e.g. abrasion, corrosion, fatigue, and disruption; then it was recognized, more than ever, that most technological advancements are constrained with surface requirements. In a wide range of industry (such as gas and oil exploitation, mining, and manufacturing), the surfaces generate an important problem in technological advancement. Passing time shows us new interesting methods in surface engineering. These methods usually apply to enhance the surface properties, e.g. wear rate, fatigue, abrasion, and corrosion resistance. This book collects some of new methods in surface engineering.
Author: Publisher: John Wiley & Sons ISBN: 9783527627066 Category : Science Languages : en Pages : 278
Book Description
With contributions from an international group of expert authors, this book includes the latest trends in tailoring interfacial properties electrochemically. The chapters cover various organic and inorganic compounds, with applications ranging from electrochemistry to nanotechnology and biology. Of interest to physical, surface and electrochemists, materials scientists and physicists.
Author: Abner Brenner Publisher: Elsevier ISBN: 1483223116 Category : Technology & Engineering Languages : en Pages : 735
Book Description
Electrodeposition of Alloys: Principles and Practice, Volume I covers the general and theoretical aspects of the electrodeposition of alloy containing silver and/or copper. This book is organized into three parts encompassing 21 chapters. The first part considers first the history of electrodeposition, the applications of electrodeposited alloys, and the practical considerations involved in electrodeposition. This part also deals with the effect of operating variables on composition of electrodeposited alloys, and the physico-chemical properties of the alloy. The second part focuses on the theoretical aspects of alloy electrodeposition. This part includes discussions on the role of cathode diffusion layer, the effects of complexing agents, and the concept of alloy plating. The third part discusses the practical aspects of the electrodeposition of alloys, focusing primarily on the electrodeposition of alloys from aqueous solutions. This part examines first brass and bronze plating, followed by the electrodeposition of copper-tin, silver, and iron containing alloys. This book is directed toward electrochemists and researchers.
Author: Richard W. Siegel Publisher: Springer Science & Business Media ISBN: 9780792358541 Category : Technology & Engineering Languages : en Pages : 378
Book Description
Timely information on scientific and engineering developments occurring in laboratories around the world provides critical input to maintaining the economic and technological strength of the United States. Moreover, sharing this information quickly with other countries can greatly enhance the productivity of scientists and engineers. These are some of the reasons why the National Science Foundation (NSF) has been involved in funding science and technology assessments comparing the United States and foreign countries since the early 1980s. A substantial number of these studies have been conducted by the World Technology Evaluation Center (WTEC) managed by Loyola College through a cooperative agreement with NSF. The National Science and Technology Council (NSTC), Committee on Technology's Interagency Working Group on NanoScience, Engineering and Technology (CT/IWGN) worked with WTEC to develop the scope of this Nanostucture Science and Technology report in an effort to develop a baseline of understanding for how to strategically make Federal nanoscale R&D investments in the coming years. The purpose of the NSTC/WTEC activity is to assess R&D efforts in other countries in specific areas of technology, to compare these efforts and their results to U. S. research in the same areas, and to identify opportunities for international collaboration in precompetitive research. Many U. S. organizations support substantial data gathering and analysis efforts focusing on nations such as Japan. But often the results of these studies are not widely available. At the same time, government and privately sponsored studies that are in the public domain tend to be "input" studies.
Author: Hari Singh Nalwa Publisher: ISBN: 9781588830005 Category : Science Languages : en Pages : 0
Book Description
Twelve contributions comprise a reference source that is a coherent presentation of the state of the art in this fast growing area of nanotechnology research. Magnetic nanostructures are important for their phenomenal potential for storage; their great commercial value will come from applications in
Author: Duncan W. Bruce Publisher: John Wiley & Sons ISBN: 9780470997499 Category : Technology & Engineering Languages : en Pages : 0
Book Description
In the past few decades, the increasingly routine use of advanced structural probes for studying the structure and dynamics of the solid state has led to some dramatic developments in the field of porous solids. These materials are fundamental in a diverse range of applications, such as shape-selective catalysts for energy-efficient organic transformations, new media for pollutant removal, and gas storage materials for energy technologies. Porosity in inorganic materials may range from the nano-scale to the macro-scale, and the drive towards particular properties remains the goal in this fast-developing area of research. Covering some of the key families of inorganic solids that are currently being studied, Porous Materials discusses: Metal Organic Frameworks Materials Mesoporous Silicates Ordered Porous Crystalline Transition Metal Oxides Recent Developments in Templated Porous Carbon Materials Synthetic Silicate Zeolites: Diverse Materials Accessible Through Geoinspiration Additional volumes in the Inorganic Materials Series: Low-Dimensional Solids | Molecular Materials | Functional Oxides | Energy Materials
Author: 
Author: 
Author: Manuel Vázquez
Author: 
Author: Ekkes H. Brück
Author: Mahmood Aliofkhazraei
Author: 
Author: Abner Brenner
Author: Richard W. Siegel
Author: Hari Singh Nalwa
Author: Duncan W. Bruce