Author: H. Kieran McCabePublisher:
ISBN:
Category :
Languages : en
Pages : 127
Book Description
Spray and Combustion Visualization in a Production Direct Injection Spark Ignition Two-stroke Engine
Author: H. Kieran McCabeAutomotive Spark-Ignited Direct-Injection Gasoline Engines
Author: F. ZhaoPublisher: Elsevier
ISBN: 008055279X
Category : Technology & Engineering
Languages : en
Pages : 129
Book Description
The process of fuel injection, spray atomization and vaporization, charge cooling, mixture preparation and the control of in-cylinder air motion are all being actively researched and this work is reviewed in detail and analyzed. The new technologies such as high-pressure, common-rail, gasoline injection systems and swirl-atomizing gasoline fuel injections are discussed in detail, as these technologies, along with computer control capabilities, have enabled the current new examination of an old objective; the direct-injection, stratified-charge (DISC), gasoline engine. The prior work on DISC engines that is relevant to current GDI engine development is also reviewed and discussed. The fuel economy and emission data for actual engine configurations have been obtained and assembled for all of the available GDI literature, and are reviewed and discussed in detail. The types of GDI engines are arranged in four classifications of decreasing complexity, and the advantages and disadvantages of each class are noted and explained. Emphasis is placed upon consensus trends and conclusions that are evident when taken as a whole; thus the GDI researcher is informed regarding the degree to which engine volumetric efficiency and compression ratio can be increased under optimized conditions, and as to the extent to which unburned hydrocarbon (UBHC), NOx and particulate emissions can be minimized for specific combustion strategies. The critical area of GDI fuel injector deposits and the associated effect on spray geometry and engine performance degradation are reviewed, and important system guidelines for minimizing deposition rates and deposit effects are presented. The capabilities and limitations of emission control techniques and after treatment hardware are reviewed in depth, and a compilation and discussion of areas of consensus on attaining European, Japanese and North American emission standards presented. All known research, prototype and production GDI engines worldwide are reviewed as to performance, emissions and fuel economy advantages, and for areas requiring further development. The engine schematics, control diagrams and specifications are compiled, and the emission control strategies are illustrated and discussed. The influence of lean-NOx catalysts on the development of late-injection, stratified-charge GDI engines is reviewed, and the relative merits of lean-burn, homogeneous, direct-injection engines as an option requiring less control complexity are analyzed.
Combustion and Spray Visualization in a High-speed Direct-injected Engine
Author: Aakash PuntambekarSimulation of Spray Combustion in a Direct-injected, Spark-ignited, Two-stroke Engine
Author: Himanshu RaiThe Effects of Spray Characteristics on Combustion and Emission Performance of a Two-stroke Direct-injection Engine
Author: Mark CasarellaDirect Injection Systems
Author: Cornel C StanPublisher: SAE International
ISBN: 0768030498
Category : Technology & Engineering
Languages : en
Pages : 126
Book Description
Direct Injection Systems: The Next Decade in Engine Technology explores potentials that have been recognized and successfully applied, including fuel direct injection, fully variable valve control, downsizing, operation within hybrid scenarios, and use of alternative fuels.
Fundamentals of Fuel Injection and Emission in Two-stroke Engines
Author: Wadysaw MitianiecPublisher: Nova Science Publishers
ISBN: 9781536124729
Category : Two-stroke cycle engines
Languages : en
Pages : 0
Book Description
The main goal of the book is the presentation of the last theoretical and experimental works concerning fuel injection systems, mainly in small power two-stroke engines as well as in marine engines. This book includes thirteen chapters devoted to the processes of fuel injection and the combustion that takes place in a stratified charge within the cylinders of two-stroke engines. In the first two chapters, the division into different injection systems in two-stroke engines and each injection system is briefly described. Various theoretical and practical solutions of fueling system designs are described. In Chapter Three, mathematical models, the spatial movement of gas in the cylinder and the combustion chamber are introduced, taking into account the turbulence of the charge. Chapter Four relates to the behavior of fuel injected into the gaseous medium, including evaporation processes, disintegration and processes occurring while the fuel drops connect with the wall. The next section describes the zero-dimensional model of fuel injection in two-stroke engines along with examples of numerical calculations. The sixth chapter is devoted to CFD multi-dimensional models of movement and evaporation of the fuel in a closed gaseous medium, occurring also in other engine types. Chapter Seven describes a two-zone model of the combustion process and the effect of the geometry of the combustion chamber on the flame propagation with a simplified verification model of combustion. Chapter Eight compares the propagation phase of gas and liquid fuels concerning direct fuel injection as well as the direct fuel injection from the cylinder head and the thermodynamic parameters of the charge. The formation of the components during the combustion process in the direct fuel injection two-stroke engine was obtained by numerical calculations and results are discussed in Chapter Nine. Chapter Ten describes the parameters of the two-stroke engine with a direct fuel injection carried out at the Cracow University of Technology. Additionally, the chapter presents CFD simulations of fuel propagation and combustion processes, taking into account the formation of toxic components and exhaust gas emission. The processes of two direct rich mixture injection systems FAST and RMIS developed in CUT are presented in Chapter Eleven. Miscellaneous problems of direct fuel injection, such as characteristics of fuel injectors, problems of direct gaseous fuel injection, and the application of fuelling systems in outboard engines and snowmobile vehicles are presented in Chapter Twelve. A comparison of working parameters in two- and four stroke engines is also mapped out. The last chapters contain the final conclusions and remarks concerning fuel injection and emission of exhaust gases in small two-stroke engines. This book is a comprehensive monograph on fuel injection. The author presents a series of theoretical and design information from his own experience and on the basis of the works of other authors. The main text intends to direct fuel injection with respect to gas motion in the combustion chamber and influence the injection parameters for exhaust emission. The book presents its own theoretical work and experimental tests concerning a two-stroke gasoline engine with electrically controlled direct fuel injection. The book describes the processes of a general nature also occurring in other types of engines and presents a comparison of different injection systems on working parameters and gas emission. The book contains 294 images, 290 equations and 16 tables obtained from the CFD simulation and experimental works.
A Visualization Study of Mixture Preparation Mechanisms for Port Fuel Injected Spark Ignition Engines
Author: Vincent Stanley CostanzoPublisher:
ISBN:
Category :
Languages : en
Pages : 138
Book Description
An experimental study was carried out that examined qualitatively the mixture preparation process in port fuel injected spark ignition engines. The primary variables in this study were intake valve lift, intake valve timing, injector spray quality, and injection timing. A special visualization engine was used to enable high-speed video of the fuel-air mixture flowing through the intake valve, as well as the wetting of the intake valve and head in the combustion chamber. Additionally, video was taken from within the intake port using a borescope to examine liquid fuel distribution in the port. Finally, a simulation study was carried out in order to understand how the various combinations of intake valve lifts and timings affect the flow velocity through the valve gap to aid in the interpretation of the videos. The net result of the study was the construction of an "event diagram" for each experimental condition that identifies and explains the sequence of events and interactions affecting the liquid fuel. Six mechanisms that transport liquid fuel into the combustion chamber and five that affect liquid fuel within the combustion chamber were identified.
Combustion and Emissions Potential in a Direct-injection Two-stroke Engine
Author: Brian McGuireAtlas of Visualization
Author: Yasuki NakayamaPublisher: CRC Press
ISBN: 9780849326561
Category : Computers
Languages : en
Pages : 260
Book Description
Visualization is a novel interdisciplinary science for making any phenomenon clear by visualizing the invisible using computer techniques. It covers such diverse phenomena as fluid flow, heat and mass transfer, sound, electromagnetism, and chemical change and its combinations. The Atlas of Visualization, II presents the latest advances in visualization techniques, image processing, computer graphics, and visualization of measured and compound results. Focusing on both experimental and computer-aided visualization, this encyclopedic resource discusses all aspects of this new and evolving science.