Author: E. Clasen Publisher: ISBN: Category : Languages : en Pages : 14
Book Description
Instantaneous successive spectral infrared (IR) images were obtained from a spray plume in a direct injection (DI) type compression-ignition (Cl) engine during the compression and combustion periods. The engine eqwpped with a high pressure electronic-controlled fuel injector system was operated by using D-2 Diesel fuel. In the new imaging system used for the present study, four high-speed IR cameras (with respective band filters in front) were lined up to a single optical arrangement containing three spectral beam splitters to obtain four spectral images at once. Two band filters were used for imaging the water vapor distribution and another two band filters were placed for capturing images of combustion chamber wall or soot formation. The simultaneous imaging was successively triggered by signals from an encoder connected to the engine. The fuel injection parameters were precisely controlled and the pressure-time (p-t) history was obtained for individual sets of images. The start of fuel injection was varied through four different crank angle positions. Mentioning some results from the study, the spectral IR images had no resemblance with the ones obtained using a visible-range camera from a comparable engine system as reported by others. In general, the present spectral images taken at the same crank angle were not mutually comparable.
Author: Y. I. Jeong Publisher: ISBN: Category : Diesel motor Languages : en Pages : 14
Book Description
In-cylinder process of a direct injection (DI) compression ignition (CI) engine was studied by using the Rutgers high-speed spectral infrared (IR) imaging system and the KIVA-II computer code. Comparison of the engine measurements with the computational prediction was attempted. In order to perform the instantaneous IR imaging, a Cummins 903 engine cylinder head was modified by installing an optical access in place of one of the intake valves, which required designing a new rocker-arm mechanism. The measurements obtained using the high-speed dual spectra IR imaging system were processed by the conventional two-color method which employed soot as the radiating target. The KIVA-II program was coded in order to match engine and operation conditions to those employed in the present measurements for achieving mutual consistency of the analysis. (MM).
Author: Publisher: ISBN: Category : Languages : en Pages : 101
Book Description
The study was to investigate in-cylinder events of a direct injection-type diesel engine by using a new high-speed infrared (IR) digital imaging systems for obtaining information that was difficult to achieve by the conventional devices. For this, a new high-speed dual-spectra infrared digital imaging system was developed to simultaneously capture two geometrically identical (in respective spectral) sets of IR images having discrete digital information in a (64x64) matrix at rates as high as over 1,800 frames/sec each with exposure period as short as 20 micron sec. At the same time, a new advanced four-color W imaging system was constructed. The first two sets of spectral data were the radiation from water vapor emission bands to compute the distributions of temperature and specie in the gaseous mixture and the remaining two sets of data were to find the instantaneous temperature distribution over the cylinder surface. More than eight reviewed publications have been produced to report many new findings including: Distributions of Water Vapor and Temperature in a Flame; End Gas Images Prior to Onset of Knock; Effect of MTBE on Diesel Combustion; Impact of Oxygen Enrichment on In-cylinder Reactions; Spectral IR Images of Spray Plume; Residual Gas Distribution; Preflame Reactions in Diesel Combustion; Preflame Reactions in the End Gas of an SI Engine; Postflame Oxidation; and Liquid Fuel Layers during Combustion in an SI Engine. In addition, some computational analysis of diesel combustion was performed using KIVA-II program in order to compare results from the prediction and the measurements made using the new IR imaging diagnostic tool.
Author: Publisher: ISBN: Category : Languages : en Pages : 101
Book Description
The study was to investigate in-cylinder events of a direct injection-type diesel engine by using a new high-speed infrared (IR) digital imaging systems for obtaining information that was difficult to achieve by the conventional devices. For this, a new high-speed-dual-spectra infrared digital imaging system was developed to simultaneously capture two geometrically identical (in respective spectral) sets of IR images having discrete digital information in a (64x64) matrix at rates as high as over 1,800 frames/sec each with exposure period as short as 20 usec. At the same time, a new advanced four-color IR imaging system was constructed. The first two sets of spectral data were the radiation from water vapor emission bands to compute the distributions of temperature and specie in the gaseous mixture and the remaining two sets of data were to find the instantaneous temperature distribution over the cylinder surface. More than eight reviewed publications have been produced to report many new findings including: Distributions of Water Vapor and Temperature in a Flame; End Gas Images Prior to Onset of Knock; Effect of MTBE on Diesel Combustion; Impact of Oxygen Enrichment on In-cylinder Reactions; Spectral IR Images of Spray Plume; Residual Gas Distribution; Preflame Reactions in Diesel Combustion; Preflame Reactions in the End Gas of an SI Engine; Postflame Oxidation; and Liquid Fuel Layers during Combustion in an SI Engine. In addition, some computational analysis of diesel combustion was performed using KIVA-II program in order to compare results from the prediction and the measurements made using the new IR imaging diagnostic tool.
Author: Daniel J Holt Publisher: SAE International ISBN: 0768013313 Category : Technology & Engineering Languages : en Pages : 279
Book Description
A key topic of many technical discussions has been the development of alternative fuels to power the compression ignition engine. Reasons for this include the desire to reduce the dependency on petroleum-based fuel and, at the same time, to reduce the particulate matter (PM) and NOx emissions. Also, there has been interest generated in the diesel engine because of the reduction in greenhouse gases that has been proposed during the 2008-2012 time frame in Europe and the regulations that affect diesel engines in the United States.
Author: E. Clasen
Author: Eric S. Clasen
Author: Youngil Jeong
Author: Y. I. Jeong
Author: 
Author: 
Author: Tomislav Themel
Author: Cody William Squibb
Author: Society of Automotive Engineers
Author: Daniel J Holt