Author: Christian Piguet
Publisher: CRC Press
ISBN: 142003720X
Category : Technology & Engineering
Languages : en
Pages : 392
Book Description
The power consumption of microprocessors is one of the most important challenges of high-performance chips and portable devices. In chapters drawn from Piguet's recently published Low-Power Electronics Design, this volume addresses the design of low-power microprocessors in deep submicron technologies. It provides a focused reference for specialists involved in systems-on-chips, from low-power microprocessors to DSP cores, reconfigurable processors, memories, ad-hoc networks, and embedded software. Low-Power Processors and Systems on Chips is organized into three broad sections for convenient access. The first section examines the design of digital signal processors for embedded applications and techniques for reducing dynamic and static power at the electrical and system levels. The second part describes several aspects of low-power systems on chips, including hardware and embedded software aspects, efficient data storage, networks-on-chips, and applications such as routing strategies in wireless RF sensing and actuating devices. The final section discusses embedded software issues, including details on compilers, retargetable compilers, and coverification tools. Providing detailed examinations contributed by leading experts, Low-Power Processors and Systems on Chips supplies authoritative information on how to maintain high performance while lowering power consumption in modern processors and SoCs. It is a must-read for anyone designing modern computers or embedded systems.
Architecture of Computing Systems
Author: Dietmar Fey
Publisher: Springer Nature
ISBN: 303166146X
Category :
Languages : en
Pages : 368
Book Description
Publisher: Springer Nature
ISBN: 303166146X
Category :
Languages : en
Pages : 368
Book Description
VLSI-SoC: From Systems to Silicon
Author: Ricardo Reis
Publisher: Springer
ISBN: 0387736611
Category : Technology & Engineering
Languages : en
Pages : 342
Book Description
This book contains extended and revised versions of the best papers that were presented during the thirteenth edition of the IFIP TC 10 International Conference on Very Large Scale Integration, a Global System-on-Chip Design and CAD conference. This conference provides a forum to exchange ideas and show industrial and academic research results in the field of microelectronics design.
Publisher: Springer
ISBN: 0387736611
Category : Technology & Engineering
Languages : en
Pages : 342
Book Description
This book contains extended and revised versions of the best papers that were presented during the thirteenth edition of the IFIP TC 10 International Conference on Very Large Scale Integration, a Global System-on-Chip Design and CAD conference. This conference provides a forum to exchange ideas and show industrial and academic research results in the field of microelectronics design.
Nature-Inspired Networking
Author: Phan Cong-Vinh
Publisher: CRC Press
ISBN: 1351182064
Category : Computers
Languages : en
Pages : 371
Book Description
"Nature-inspired" includes, roughly speaking, "bio-inspired"+"physical-inspired"+"social-inspired"+ and so on. This book contains highly original contributions about how nature is going to shape networking systems of the future. Hence, it focuses on rigorous approaches and cutting-edge solutions, which encompass three classes of major methods: 1) Those that take inspiration from nature for the development of novel problem solving techniques; 2) Those that are based on the use of networks to synthesize natural phenomena; and 3) Those that employ natural materials to compute or communicate.
Publisher: CRC Press
ISBN: 1351182064
Category : Computers
Languages : en
Pages : 371
Book Description
"Nature-inspired" includes, roughly speaking, "bio-inspired"+"physical-inspired"+"social-inspired"+ and so on. This book contains highly original contributions about how nature is going to shape networking systems of the future. Hence, it focuses on rigorous approaches and cutting-edge solutions, which encompass three classes of major methods: 1) Those that take inspiration from nature for the development of novel problem solving techniques; 2) Those that are based on the use of networks to synthesize natural phenomena; and 3) Those that employ natural materials to compute or communicate.
Energy Autonomous Micro and Nano Systems
Author: Marc Belleville
Publisher: John Wiley & Sons
ISBN: 1118587820
Category : Technology & Engineering
Languages : en
Pages : 247
Book Description
Providing a detailed overview of the fundamentals and latest developments in the field of energy autonomous microsystems, this book delivers an in-depth study of the applications in the fields of health and usage monitoring in aeronautics, medical implants, and home automation, drawing out the main specifications on such systems. Introductory information on photovoltaic, thermal and mechanical energy harvesting, and conversion, is given, along with the latest results in these fields. This book also provides a state of the art of ultra-low power sensor interfaces, digital signal processing and wireless communications. In addition, energy optimizations at the sensor node and sensors network levels are discussed, thus completing this overview. This book details the challenges and latest techniques available to readers who are interested in this field. A major strength of this book is that the first three chapters are application orientated and thus, by setting the landscape, introduce the technical chapters. There is also a good balance between the technical application, covering all the system-related aspects and, within each chapter, details on the physics, materials and technologies associated with electronics. Contents Introduction. Introduction to Energy Autonomous Micro and Nano Systems and Presentation of Contributions, Marc Belleville and Cyril Condemine. 1. Sensors at the Core of Building Control, Gilles Chabanis, Laurent Chiesi, Hynek Raisigel, Isabelle Ressejac and Véronique Boutin. 2. Toward Energy Autonomous MedicalImplants, Raymond Campagnolo and Daniel Kroiss. 3. Energy Autonomous Systems in Aeronautic Applications, Thomas Becker, Jirka Klaue and Martin Kluge. 4. Energy Harvesting by Photovoltaic Effect, Emmanuelle Rouvière, Simon Perraud, Cyril Condemine and Guy Waltisperger. 5. Mechanical Energy Harvesting, Ghislain Despesse, Jean Jacques Chaillout, Sébastien Boisseau and Claire Jean-Mistral. 6. Thermal Energy Harvesting, Tristan Caroff, Emmanuelle Rouvière and Jérôme Willemin. 7. Lithium Micro-Batteries, Raphaël Salot. 8. Ultra-Low-Power Sensors, Pascal Nouet, Norbert Dumas, Laurent Latorre and Frédérick Mailly. 9. Ultra-Low-Power Signal Processing in Autonomous Systems, Christian Piguet. 10. Ultra-Low-Power Radio Frequency Communications and Protocols, Eric Mercier. 11. Energy Management in an Autonomous Microsystem, Jean-Frédéric Christmann, Edith Beigne, Cyril Condemine, Jérôme Willemin and Christian Piguet. 12. Optimizing Energy Efficiency of Sensor Networks, Olivier Sentieys and Olivier Berder.
Publisher: John Wiley & Sons
ISBN: 1118587820
Category : Technology & Engineering
Languages : en
Pages : 247
Book Description
Providing a detailed overview of the fundamentals and latest developments in the field of energy autonomous microsystems, this book delivers an in-depth study of the applications in the fields of health and usage monitoring in aeronautics, medical implants, and home automation, drawing out the main specifications on such systems. Introductory information on photovoltaic, thermal and mechanical energy harvesting, and conversion, is given, along with the latest results in these fields. This book also provides a state of the art of ultra-low power sensor interfaces, digital signal processing and wireless communications. In addition, energy optimizations at the sensor node and sensors network levels are discussed, thus completing this overview. This book details the challenges and latest techniques available to readers who are interested in this field. A major strength of this book is that the first three chapters are application orientated and thus, by setting the landscape, introduce the technical chapters. There is also a good balance between the technical application, covering all the system-related aspects and, within each chapter, details on the physics, materials and technologies associated with electronics. Contents Introduction. Introduction to Energy Autonomous Micro and Nano Systems and Presentation of Contributions, Marc Belleville and Cyril Condemine. 1. Sensors at the Core of Building Control, Gilles Chabanis, Laurent Chiesi, Hynek Raisigel, Isabelle Ressejac and Véronique Boutin. 2. Toward Energy Autonomous MedicalImplants, Raymond Campagnolo and Daniel Kroiss. 3. Energy Autonomous Systems in Aeronautic Applications, Thomas Becker, Jirka Klaue and Martin Kluge. 4. Energy Harvesting by Photovoltaic Effect, Emmanuelle Rouvière, Simon Perraud, Cyril Condemine and Guy Waltisperger. 5. Mechanical Energy Harvesting, Ghislain Despesse, Jean Jacques Chaillout, Sébastien Boisseau and Claire Jean-Mistral. 6. Thermal Energy Harvesting, Tristan Caroff, Emmanuelle Rouvière and Jérôme Willemin. 7. Lithium Micro-Batteries, Raphaël Salot. 8. Ultra-Low-Power Sensors, Pascal Nouet, Norbert Dumas, Laurent Latorre and Frédérick Mailly. 9. Ultra-Low-Power Signal Processing in Autonomous Systems, Christian Piguet. 10. Ultra-Low-Power Radio Frequency Communications and Protocols, Eric Mercier. 11. Energy Management in an Autonomous Microsystem, Jean-Frédéric Christmann, Edith Beigne, Cyril Condemine, Jérôme Willemin and Christian Piguet. 12. Optimizing Energy Efficiency of Sensor Networks, Olivier Sentieys and Olivier Berder.
Variation Tolerant On-Chip Interconnects
Author: Ethiopia Enideg Nigussie
Publisher: Springer Science & Business Media
ISBN: 1461401313
Category : Technology & Engineering
Languages : en
Pages : 177
Book Description
This book presents design techniques, analysis and implementation of high performance and power efficient, variation tolerant on-chip interconnects. Given the design paradigm shift to multi-core, interconnect-centric designs and the increase in sources of variability and their impact in sub-100nm technologies, this book will be an invaluable reference for anyone concerned with the design of next generation, high-performance electronics systems.
Publisher: Springer Science & Business Media
ISBN: 1461401313
Category : Technology & Engineering
Languages : en
Pages : 177
Book Description
This book presents design techniques, analysis and implementation of high performance and power efficient, variation tolerant on-chip interconnects. Given the design paradigm shift to multi-core, interconnect-centric designs and the increase in sources of variability and their impact in sub-100nm technologies, this book will be an invaluable reference for anyone concerned with the design of next generation, high-performance electronics systems.
Signal Processing and Analysis of Electrical Circuit
Author: Adam Glowacz
Publisher: MDPI
ISBN: 3039282948
Category : Technology & Engineering
Languages : en
Pages : 604
Book Description
This Special Issue with 35 published articles shows the significance of the topic “Signal Processing and Analysis of Electrical Circuit”. This topic has been gaining increasing attention in recent times. The presented articles can be categorized into four different areas: signal processing and analysis methods of electrical circuits; electrical measurement technology; applications of signal processing of electrical equipment; fault diagnosis of electrical circuits. It is a fact that the development of electrical systems, signal processing methods, and circuits has been accelerating. Electronics applications related to electrical circuits and signal processing methods have gained noticeable attention in recent times. The methods of signal processing and electrical circuits are widely used by engineers and scientists all over the world. The constituent papers represent a significant contribution to electronics and present applications that can be used in industry. Further improvements to the presented approaches are required for realizing their full potential.
Publisher: MDPI
ISBN: 3039282948
Category : Technology & Engineering
Languages : en
Pages : 604
Book Description
This Special Issue with 35 published articles shows the significance of the topic “Signal Processing and Analysis of Electrical Circuit”. This topic has been gaining increasing attention in recent times. The presented articles can be categorized into four different areas: signal processing and analysis methods of electrical circuits; electrical measurement technology; applications of signal processing of electrical equipment; fault diagnosis of electrical circuits. It is a fact that the development of electrical systems, signal processing methods, and circuits has been accelerating. Electronics applications related to electrical circuits and signal processing methods have gained noticeable attention in recent times. The methods of signal processing and electrical circuits are widely used by engineers and scientists all over the world. The constituent papers represent a significant contribution to electronics and present applications that can be used in industry. Further improvements to the presented approaches are required for realizing their full potential.
Integrated Circuit and System Design. Power and Timing Modeling, Optimization and Simulation
Author: Lars Svensson
Publisher: Springer Science & Business Media
ISBN: 3540959475
Category : Computers
Languages : en
Pages : 474
Book Description
This book constitutes the thoroughly refereed post-conference proceedings of 18th International Workshop on Power and Timing Modeling, Optimization and Simulation, PATMOS 2008, featuring Integrated Circuit and System Design, held in Lisbon, Portugal during September 10-12, 2008. The 31 revised full papers and 10 revised poster papers presented together with 3 invited talks and 4 papers from a special session on reconfigurable architectures were carefully reviewed and selected from numerous submissions. The papers are organized in topical sections on low-leakage and subthreshold circuits, low-power methods and models, arithmetic and memories, variability and statistical timing, synchronization and interconnect, power supplies and switching noise, low-power circuits; reconfigurable architectures, circuits and methods, power and delay modeling, as well as power optimizations addressing reconfigurable architectures.
Publisher: Springer Science & Business Media
ISBN: 3540959475
Category : Computers
Languages : en
Pages : 474
Book Description
This book constitutes the thoroughly refereed post-conference proceedings of 18th International Workshop on Power and Timing Modeling, Optimization and Simulation, PATMOS 2008, featuring Integrated Circuit and System Design, held in Lisbon, Portugal during September 10-12, 2008. The 31 revised full papers and 10 revised poster papers presented together with 3 invited talks and 4 papers from a special session on reconfigurable architectures were carefully reviewed and selected from numerous submissions. The papers are organized in topical sections on low-leakage and subthreshold circuits, low-power methods and models, arithmetic and memories, variability and statistical timing, synchronization and interconnect, power supplies and switching noise, low-power circuits; reconfigurable architectures, circuits and methods, power and delay modeling, as well as power optimizations addressing reconfigurable architectures.
3D Stacked Chips
Author: Ibrahim (Abe) M. Elfadel
Publisher: Springer
ISBN: 3319204815
Category : Technology & Engineering
Languages : en
Pages : 354
Book Description
This book explains for readers how 3D chip stacks promise to increase the level of on-chip integration, and to design new heterogeneous semiconductor devices that combine chips of different integration technologies (incl. sensors) in a single package of the smallest possible size. The authors focus on heterogeneous 3D integration, addressing some of the most important challenges in this emerging technology, including contactless, optics-based, and carbon-nanotube-based 3D integration, as well as signal-integrity and thermal management issues in copper-based 3D integration. Coverage also includes the 3D heterogeneous integration of power sources, photonic devices, and non-volatile memories based on new materials systems.
Publisher: Springer
ISBN: 3319204815
Category : Technology & Engineering
Languages : en
Pages : 354
Book Description
This book explains for readers how 3D chip stacks promise to increase the level of on-chip integration, and to design new heterogeneous semiconductor devices that combine chips of different integration technologies (incl. sensors) in a single package of the smallest possible size. The authors focus on heterogeneous 3D integration, addressing some of the most important challenges in this emerging technology, including contactless, optics-based, and carbon-nanotube-based 3D integration, as well as signal-integrity and thermal management issues in copper-based 3D integration. Coverage also includes the 3D heterogeneous integration of power sources, photonic devices, and non-volatile memories based on new materials systems.
Completion Detection in Asynchronous Circuits
Author: Pallavi Srivastava
Publisher: Springer Nature
ISBN: 3031183975
Category : Technology & Engineering
Languages : en
Pages : 129
Book Description
This book is intended for designers with experience in traditional (clocked) circuit design, seeking information about asynchronous circuit design, in order to determine if it would be advantageous to adopt asynchronous methodologies in their next design project. The author introduces a generic approach for implementing a deterministic completion detection scheme for asynchronous bundled data circuits that incorporates a data-dependent computational process, taking advantage of the average-case delay. The author validates the architecture using a barrel shifter, as shifting is the basic operation required by all the processors. The generic architecture proposed in this book for a deterministic completion detection scheme for bundled data circuits will facilitate researchers in considering the asynchronous design style for developing digital circuits.
Publisher: Springer Nature
ISBN: 3031183975
Category : Technology & Engineering
Languages : en
Pages : 129
Book Description
This book is intended for designers with experience in traditional (clocked) circuit design, seeking information about asynchronous circuit design, in order to determine if it would be advantageous to adopt asynchronous methodologies in their next design project. The author introduces a generic approach for implementing a deterministic completion detection scheme for asynchronous bundled data circuits that incorporates a data-dependent computational process, taking advantage of the average-case delay. The author validates the architecture using a barrel shifter, as shifting is the basic operation required by all the processors. The generic architecture proposed in this book for a deterministic completion detection scheme for bundled data circuits will facilitate researchers in considering the asynchronous design style for developing digital circuits.
Automated Technology for Verification and Analysis
Author: Zhiming Liu
Publisher: Springer
ISBN: 3642047610
Category : Computers
Languages : en
Pages : 423
Book Description
This book constitutes the proceedings of the 7th International Symposium on Automated Technology for Verification and Analysis, ATVA 2009, held in Macao, China, in October 2009. The 23 regular papers and 3 took papers presented together with 3 invited talks, were carefully reviewed and selected from 74 research papers and 10 tool papers submissions. The papers are organized in topical sections on state space reduction, tools, probabilistic systems, medley, temporal logic, abstraction and refinement, and fault tolerant systems.
Publisher: Springer
ISBN: 3642047610
Category : Computers
Languages : en
Pages : 423
Book Description
This book constitutes the proceedings of the 7th International Symposium on Automated Technology for Verification and Analysis, ATVA 2009, held in Macao, China, in October 2009. The 23 regular papers and 3 took papers presented together with 3 invited talks, were carefully reviewed and selected from 74 research papers and 10 tool papers submissions. The papers are organized in topical sections on state space reduction, tools, probabilistic systems, medley, temporal logic, abstraction and refinement, and fault tolerant systems.