Space-time Continuous Phase Modulation PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Space-time Continuous Phase Modulation PDF full book. Access full book title Space-time Continuous Phase Modulation by . Download full books in PDF and EPUB format.
Author: Publisher: ISBN: Category : Languages : en Pages :
Book Description
The combination of Space-Time (ST) coding and Continuous-Phase Modulation (CPM) produces a low power, energy efficient communication scheme suitable for wireless transmission. Space-time coding increases the reliability of transmission, and continuous-phase modulation (CPM) has the potential to provide considerable energy savings. CPM is a modulation technique that involves the transmission of a signal with continuous-phase and a constant envelope, where the continuous-phase property produces a very bandwidth efficient signal, and the constant-envelope property enables non linear (and thus energy efficient) signal amplification. The ST-CPM code is of special interest for wireless sensors because in the wireless sensor network environment energy consumption is highly constrained. The combination of ST codes and CPM is non-trivial and thus ST-CPM codes based upon block-based orthogonal and diagonal signal matrices are presented. These codes are forms the basis of a distributed ST-CPM code. The distributed ST codes are designed to operate in wireless networks containing a large set of nodes, of which only a small a priori unknown subset will be active at any time. The devised distributed ST-CPM scheme combines the ST-CPM code with a diagonal signaling matrix, (commonly assigned to all relay nodes) with signature vectors(uniquely assigned to nodes). The energy consumption of the proposed distributed ST-CPM scheme is compared with that of a distributed ST linear modulation (LM) scheme. The distributed ST-CPM scheme is shown to outperform the distributed ST-LM scheme for all but short-range transmission. Finally, a serially concatenated code for ST-CPM is proposed. The concatenated code consists of the diagonal signalling matrix as the inner code, and a class of double parity check (DPC) codes as the outer code. The resulting concatenated codes that are formed from the ST-CPM code and a DPC code are shown to provide performance close to capacity, and to provide performanc.
Author: Publisher: ISBN: Category : Languages : en Pages :
Book Description
The combination of Space-Time (ST) coding and Continuous-Phase Modulation (CPM) produces a low power, energy efficient communication scheme suitable for wireless transmission. Space-time coding increases the reliability of transmission, and continuous-phase modulation (CPM) has the potential to provide considerable energy savings. CPM is a modulation technique that involves the transmission of a signal with continuous-phase and a constant envelope, where the continuous-phase property produces a very bandwidth efficient signal, and the constant-envelope property enables non linear (and thus energy efficient) signal amplification. The ST-CPM code is of special interest for wireless sensors because in the wireless sensor network environment energy consumption is highly constrained. The combination of ST codes and CPM is non-trivial and thus ST-CPM codes based upon block-based orthogonal and diagonal signal matrices are presented. These codes are forms the basis of a distributed ST-CPM code. The distributed ST codes are designed to operate in wireless networks containing a large set of nodes, of which only a small a priori unknown subset will be active at any time. The devised distributed ST-CPM scheme combines the ST-CPM code with a diagonal signaling matrix, (commonly assigned to all relay nodes) with signature vectors(uniquely assigned to nodes). The energy consumption of the proposed distributed ST-CPM scheme is compared with that of a distributed ST linear modulation (LM) scheme. The distributed ST-CPM scheme is shown to outperform the distributed ST-LM scheme for all but short-range transmission. Finally, a serially concatenated code for ST-CPM is proposed. The concatenated code consists of the diagonal signalling matrix as the inner code, and a class of double parity check (DPC) codes as the outer code. The resulting concatenated codes that are formed from the ST-CPM code and a DPC code are shown to provide performance close to capacity, and to provide performanc.
Author: Matthias Hesse Publisher: ISBN: Category : Languages : en Pages : 138
Book Description
Orthogonal Space-Time block codes (STBC) have been a popular way to implement wireless communications systems with full diversity and simple decoupled maximum-likelihood decoding. However, all these codes rely on pointwise orthogonality which leads to a well-known degradation of data rate for more than two antennas. In this thesis, we introduce the concept of L2-orthogonality for non-linear Space-Time codes (STC). Our approach generalizes code design based on pointwise orthogonality. Hence, we are able to derive new codes with the same advantages as pointwise orthogonal STBC, i.e. low decoding complexity and diversity gain. At the same time, we are no longer limited by the restrictions of pointwise orthogonal codes, namely the reduction in data rate. Actually, we show how to construct full rate codes for any arbitrary number of transmit antennas. More precisely, a family of codes for continuous phase modulation (CPM) is detailed. The L2-orthogonality of these codes is ensured by a bank of phase correction functions which maintains the phase continuity but also introduces frequency offsets. We prove that these codes achieve full diversity and have full rate. Moreover, these codes don't put any restriction on the CPM parameters.
Author: Giorgio A. Vitetta Publisher: John Wiley & Sons ISBN: 1118576608 Category : Technology & Engineering Languages : en Pages : 849
Book Description
This book introduces the theoretical elements at the basis of various classes of algorithms commonly employed in the physical layer (and, in part, in MAC layer) of wireless communications systems. It focuses on single user systems, so ignoring multiple access techniques. Moreover, emphasis is put on single-input single-output (SISO) systems, although some relevant topics about multiple-input multiple-output (MIMO) systems are also illustrated. Comprehensive wireless specific guide to algorithmic techniques Provides a detailed analysis of channel equalization and channel coding for wireless applications Unique conceptual approach focusing in single user systems Covers algebraic decoding, modulation techniques, channel coding and channel equalisation
Author: John B. Anderson Publisher: Springer Science & Business Media ISBN: 1489920315 Category : Technology & Engineering Languages : en Pages : 509
Book Description
The last ten years have seen a great flowering of the theory of digital data modulation. This book is a treatise on digital modulation theory, with an emphasis on these more recent innovations. It has its origins in a collabor ation among the authors that began in 1977. At that time it seemed odd to us that the subjects of error-correcting codes and data modulation were so separated; it seemed also that not enough understanding underlay the mostly ad hoc approaches to data transmission. A great many others were intrigued, too, and the result was a large body of new work that makes up most of this book. Now the older disciplines of detection theory and coding theory have been generalized and applied to the point where it is hard to tell where these end and the theories of signal design and modulation begin. Despite our emphasis on the events of the last ten years, we have included all the traditional topics of digital phase modulation. Signal space concepts are developed, as are simple phase-shift-keyed and pulse-shaped modulations; receiver structures are discussed, from the simple linear receiver to the Viterbi algorithm; the effects of channel filtering and of hardlimiting are described. The volume thus serves well as a pedagogical book for research engineers in industry and second-year graduate students in communications engineering. The production of a manageable book required that many topics be left out.
Author: Robert L. Leatham Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
Aeronautical telemetry systems that transmit the same signal through multiple antennas from the flight vehicle suffer from severe link dropouts when the signals destructively interfere one with another at receiver. The underlying issue is a transmit array with element spacing far greater than the wavelength producing a transmit antenna pattern with significant and deep nulls. Recently, space-time coding techniques have been proven to resolve the issue for systems using linear modulations and shaped-offset quadrature shift keying (SOQPSK) modulation, a non-linear continuous phase modulation (CPM). This thesis examines application of space-time coding techniques to resolve the self-interference issue for another CPM modulation, the advanced range telemetry (ARTM) CPM. It is shown in this thesis among the two branches of space-time coding, space-time block coding (STBC) and space-time trellis coding (STTC), only the latter offers a solution for a full rate, low complexity, no hardware modification implementation. Various candidate STTCs are identified via simulation using the pair-wise error probability as a performance metric. One STTC is identified with trivial implementation costs and an error performance that is a function of code length.
Author: Lajos Hanzo Publisher: John Wiley & Sons ISBN: 0470978333 Category : Technology & Engineering Languages : en Pages : 839
Book Description
Covering the full range of channel codes from the most conventional through to the most advanced, the second edition of Turbo Coding, Turbo Equalisation and Space-Time Coding is a self-contained reference on channel coding for wireless channels. The book commences with a historical perspective on the topic, which leads to two basic component codes, convolutional and block codes. It then moves on to turbo codes which exploit iterative decoding by using algorithms, such as the Maximum-A-Posteriori (MAP), Log-MAP and Soft Output Viterbi Algorithm (SOVA), comparing their performance. It also compares Trellis Coded Modulation (TCM), Turbo Trellis Coded Modulation (TTCM), Bit-Interleaved Coded Modulation (BICM) and Iterative BICM (BICM-ID) under various channel conditions. The horizon of the content is then extended to incorporate topics which have found their way into diverse standard systems. These include space-time block and trellis codes, as well as other Multiple-Input Multiple-Output (MIMO) schemes and near-instantaneously Adaptive Quadrature Amplitude Modulation (AQAM). The book also elaborates on turbo equalisation by providing a detailed portrayal of recent advances in partial response modulation schemes using diverse channel codes. A radically new aspect for this second edition is the discussion of multi-level coding and sphere-packing schemes, Extrinsic Information Transfer (EXIT) charts, as well as an introduction to the family of Generalized Low Density Parity Check codes. This new edition includes recent advances in near-capacity turbo-transceivers as well as new sections on multi-level coding schemes and of Generalized Low Density Parity Check codes Comparatively studies diverse channel coded and turbo detected systems to give all-inclusive information for researchers, engineers and students Details EXIT-chart based irregular transceiver designs Uses rich performance comparisons as well as diverse near-capacity design examples
Author: Savo G. Glisic Publisher: John Wiley & Sons ISBN: 9780470512876 Category : Technology & Engineering Languages : en Pages : 890
Book Description
Fully revised and updated version of the successful "AdvancedWireless Communications" Wireless communications continue to attract the attention ofboth research community and industry. Since the first edition waspublished significant research and industry activities have broughtthe fourth generation (4G) of wireless communications systemscloser to implementation and standardization. "Advanced Wireless Communications" continues to provide acomparative study of enabling technologies for 4G. This secondedition has been revised and updated and now includes additionalinformation on the components of common air interface, includingthe area of space time coding , multicarrier modulation especiallyOFDM, MIMO, cognitive radio and cooperative transmission. Ideal for students and engineers in research and development inthe field of wireless communications, the second edition ofAdvanced Wireless Communications also gives an understanding tocurrent approaches for engineers in telecomm operators, governmentand regulatory institutions. New features include: Brand new chapter covering linear precoding in MIMO channelsbased on convex optimization theory. Material based on game theory modelling encompassing problemsof adjacent cell interference, flexible spectra sharing andcooperation between the nodes in ad hoc networks. Presents and discusses the latest schemes for interferencesuppression in ultra wide band (UWB) cognitive systems. Discusses the cooperative transmission and more details onpositioning.
Author: Branka Vucetic Publisher: John Wiley & Sons ISBN: 9780470847572 Category : Technology & Engineering Languages : en Pages : 340
Book Description
The capacity of wireless data communications is lagging behind demands due to unsatisfactory performance of the existing wireless networks, such as low data rates, low spectral efficiency and low quality of service. Space-time coding is an effective transmit diversity technique to combat fading in wireless communications. Space-time codes are a highly bandwidth-efficient approach to signalling within wireless communication that takes advantage of the spatial dimension by transmitting a number of data streams using multiple co-located antennas. There are various approaches to the coding structures, including space-time trellis coded modulation, space-time turbo codes and also layered architectures. The central issue in all these various coding structures is the exploitation of multipath effects in order to achieve very high spectral efficiencies. The spectral efficiencies of traditional wireless systems range between 1-5bps/sec/Hz but by using space-time techniques spectral efficiencies of 20-40bps/sec/Hz have been possible. Hence, space-time coding enables an increase in capacity by an order of magnitude. This is the main reason why space-time codes have been included in the standards for the third generation wireless communication systems and ultimately why Space-time Coding will be in great demand by individuals within industry and academia. The comprehensive understanding of space-time coding is essential in the implementation of 3G, and as the only title currently available, Space-Time Coding will be the standard text for Researchers, telecommunication engineers and network planners, academics and undergraduate/postgraduate students, telecommunications managers and consultants.
Author: 
Author: 
Author: Matthias Hesse
Author: Giorgio A. Vitetta
Author: John B. Anderson
Author: Dhammika Bokolamulla
Author: Robert L. Leatham
Author: Lajos Hanzo
Author: Savo G. Glisic
Author: Kyung-Mi Krystal Park
Author: Branka Vucetic