Author: Carl A. Moore
Publisher:
ISBN:
Category : Blades
Languages : en
Pages : 139
Book Description
Test on two aspects of the behavior of wide-angle, plane-walled, two-dimensional diffusers with essentially incompressible flow have been conducted in the Mechanical Engineering Laboratory at Stanford University. First, a thorough study of the flow mechanism has been made using dye injection in a water table. The four regimes of flow found are delineated on graphs in terms of the three important parameters. Test data from a large water-table unit and a small water-table unit are given. Second, data are presented which demonstrate means for producing efficient diffusers for total included angles up to at least 45 degrees by use of simple, short, flat vanes.
Some Effects of Vanes and of Turbulence in Two-dimensional Wide-angle Subsonic Diffusers
Author: Carl A. Moore
Publisher:
ISBN:
Category : Blades
Languages : en
Pages : 139
Book Description
Test on two aspects of the behavior of wide-angle, plane-walled, two-dimensional diffusers with essentially incompressible flow have been conducted in the Mechanical Engineering Laboratory at Stanford University. First, a thorough study of the flow mechanism has been made using dye injection in a water table. The four regimes of flow found are delineated on graphs in terms of the three important parameters. Test data from a large water-table unit and a small water-table unit are given. Second, data are presented which demonstrate means for producing efficient diffusers for total included angles up to at least 45 degrees by use of simple, short, flat vanes.
Publisher:
ISBN:
Category : Blades
Languages : en
Pages : 139
Book Description
Test on two aspects of the behavior of wide-angle, plane-walled, two-dimensional diffusers with essentially incompressible flow have been conducted in the Mechanical Engineering Laboratory at Stanford University. First, a thorough study of the flow mechanism has been made using dye injection in a water table. The four regimes of flow found are delineated on graphs in terms of the three important parameters. Test data from a large water-table unit and a small water-table unit are given. Second, data are presented which demonstrate means for producing efficient diffusers for total included angles up to at least 45 degrees by use of simple, short, flat vanes.
Some Effects of Vanes and of Turbulance on Two-dimensional Wide-angle Subsonic Diffusers
Author: Carl Anderson Moore (Jr.)
Publisher:
ISBN:
Category : Turbines
Languages : en
Pages : 426
Book Description
Publisher:
ISBN:
Category : Turbines
Languages : en
Pages : 426
Book Description
Some Effects of Vanes and of Turbulence on Two-dimensional Wide-angle Subsonic Diffusers
Author: Carl Anderson Moore
Publisher:
ISBN:
Category : Blades
Languages : en
Pages : 194
Book Description
Publisher:
ISBN:
Category : Blades
Languages : en
Pages : 194
Book Description
Some Effects of Vanes and of Turbulance on Two-dimensional Wide-angle Subsonic Diffusers
Author: Carl Anderson Moore
Publisher:
ISBN:
Category : Turbines
Languages : en
Pages : 396
Book Description
Publisher:
ISBN:
Category : Turbines
Languages : en
Pages : 396
Book Description
The Effects of Flexible Vanes on Boundary-layer Separation in Wide-angle Two-dimensional Subsonic Diffusers
The Use of Short Flat Vanes for Producing Efficient Wide-angle Two-dimensional Subsonic Diffusers
Author: David Leo Cochran
Publisher:
ISBN:
Category : Blades
Languages : en
Pages : 372
Book Description
Publisher:
ISBN:
Category : Blades
Languages : en
Pages : 372
Book Description
Use of Short Flat Vanes for Producing Efficient Wide-angle Two-dimensional Subsonic Diffusers
Author: Stanford University. Thermosciences Division. Thermosciences Division
Publisher:
ISBN:
Category : Diffusers
Languages : en
Pages : 166
Book Description
An investigation of the use of flat vanes in two-dimensional subsonic diffusers was made. Using optimum designs of vane installations, high pressure recoveries and steady flows were obtained for diffuser-wall divergence angles up to 42 degrees. Criteria for optimum configurations were developed which indicated that the vanes should be symmetrically arranged in the vicinity of the diffuser throat, that the vane-passage divergence angle should be approximately 7.0 degrees, and that the vanes should have a certain predictable length dependent upon the diffuser geometry.
Publisher:
ISBN:
Category : Diffusers
Languages : en
Pages : 166
Book Description
An investigation of the use of flat vanes in two-dimensional subsonic diffusers was made. Using optimum designs of vane installations, high pressure recoveries and steady flows were obtained for diffuser-wall divergence angles up to 42 degrees. Criteria for optimum configurations were developed which indicated that the vanes should be symmetrically arranged in the vicinity of the diffuser throat, that the vane-passage divergence angle should be approximately 7.0 degrees, and that the vanes should have a certain predictable length dependent upon the diffuser geometry.
Performance Characteristics of Plane-wall Two-dimensional Diffusers
Author: Elliott G. Reid
Publisher:
ISBN:
Category : Diffusers
Languages : en
Pages : 90
Book Description
Experiments have been made at Stanford University to determine the performance characteristics of plane-wall, two-dimensional diffusers which were so proportioned as to insure reasonable approximation of two-dimensional flow.
Publisher:
ISBN:
Category : Diffusers
Languages : en
Pages : 90
Book Description
Experiments have been made at Stanford University to determine the performance characteristics of plane-wall, two-dimensional diffusers which were so proportioned as to insure reasonable approximation of two-dimensional flow.
Vane Systems for Very Wide Angle Subsonic Diffusers
Author: Stanford University. Thermosciences Division. Thermosciences Division
Publisher:
ISBN:
Category :
Languages : en
Pages : 62
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 62
Book Description
Effects of Inlet Conditions on Performance of Two Dimensional Diffusers
Author: Stanford University. Thermosciences Division. Thermosciences Division
Publisher:
ISBN:
Category :
Languages : en
Pages : 82
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 82
Book Description