Soil-Related Input Parameters for the Biosphere Model PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Soil-Related Input Parameters for the Biosphere Model PDF full book. Access full book title Soil-Related Input Parameters for the Biosphere Model by A. J. Smith. Download full books in PDF and EPUB format.
Author: A. J. Smith Publisher: ISBN: Category : Languages : en Pages : 72
Book Description
This analysis is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN), a biosphere model supporting the Total System Performance Assessment (TSPA) for the geologic repository at Yucca Mountain. The biosphere model is one of a series of process models supporting the Total System Performance Assessment (TSPA) for the Yucca Mountain repository. A graphical representation of the documentation hierarchy for the ERMYN biosphere model is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling, and the plan for development of the biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (BSC 2003 [163602]). It should be noted that some documents identified in Figure 1-1 may be under development at the time this report is issued and therefore not available. This figure is included to provide an understanding of how this analysis report contributes to biosphere modeling in support of the license application, and is not intended to imply that access to the listed documents is required to understand the contents of this report. This report, ''Soil Related Input Parameters for the Biosphere Model'', is one of the five analysis reports that develop input parameters for use in the ERMYN model. This report is the source documentation for the six biosphere parameters identified in Table 1-1. ''The Biosphere Model Report'' (BSC 2003 [160699]) describes in detail the conceptual model as well as the mathematical model and its input parameters. The purpose of this analysis was to develop the biosphere model parameters needed to evaluate doses from pathways associated with the accumulation and depletion of radionuclides in the soil. These parameters support the calculation of radionuclide concentrations in soil from on-going irrigation and ash deposition and, as a direct consequence, radionuclide concentration in resuspended particulate matter in the atmosphere. The analysis was performed in accordance with the technical work plan for the biosphere modeling and expert support (TWP) (BSC 2003 [163602]). This analysis revises the previous one titled ''Evaluate Soil/Radionuclide Removal by Erosion and Leaching'' (CRWMS M & O 2001 [152517]). In REV 00 of this report, the data generated were fixed (i.e., taking no account of uncertainty and variability) values. This revision incorporates uncertainty and variability into the values for the bulk density, elemental partition coefficients, average annual loss of soil from erosion, resuspension enhancement factor, and field capacity water content.
Author: A. J. Smith Publisher: ISBN: Category : Languages : en Pages : 72
Book Description
This analysis is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN), a biosphere model supporting the Total System Performance Assessment (TSPA) for the geologic repository at Yucca Mountain. The biosphere model is one of a series of process models supporting the Total System Performance Assessment (TSPA) for the Yucca Mountain repository. A graphical representation of the documentation hierarchy for the ERMYN biosphere model is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling, and the plan for development of the biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (BSC 2003 [163602]). It should be noted that some documents identified in Figure 1-1 may be under development at the time this report is issued and therefore not available. This figure is included to provide an understanding of how this analysis report contributes to biosphere modeling in support of the license application, and is not intended to imply that access to the listed documents is required to understand the contents of this report. This report, ''Soil Related Input Parameters for the Biosphere Model'', is one of the five analysis reports that develop input parameters for use in the ERMYN model. This report is the source documentation for the six biosphere parameters identified in Table 1-1. ''The Biosphere Model Report'' (BSC 2003 [160699]) describes in detail the conceptual model as well as the mathematical model and its input parameters. The purpose of this analysis was to develop the biosphere model parameters needed to evaluate doses from pathways associated with the accumulation and depletion of radionuclides in the soil. These parameters support the calculation of radionuclide concentrations in soil from on-going irrigation and ash deposition and, as a direct consequence, radionuclide concentration in resuspended particulate matter in the atmosphere. The analysis was performed in accordance with the technical work plan for the biosphere modeling and expert support (TWP) (BSC 2003 [163602]). This analysis revises the previous one titled ''Evaluate Soil/Radionuclide Removal by Erosion and Leaching'' (CRWMS M & O 2001 [152517]). In REV 00 of this report, the data generated were fixed (i.e., taking no account of uncertainty and variability) values. This revision incorporates uncertainty and variability into the values for the bulk density, elemental partition coefficients, average annual loss of soil from erosion, resuspension enhancement factor, and field capacity water content.
Author: Publisher: ISBN: Category : Languages : en Pages :
Book Description
This analysis report is one of the technical reports documenting the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the geologic repository at Yucca Mountain. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows relationships among the reports developed for biosphere modeling and biosphere abstraction products for the TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (TWP) (BSC 2003 [163602]). Some documents in Figure 1-1 may be under development and not available when this report is issued. This figure provides an understanding of how this report contributes to biosphere modeling in support of the license application (LA), but access to the listed documents is not required to understand the contents of this report. This report is one of the reports that develops input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2003 [160699]) describes the conceptual model, the mathematical model, and the input parameters. The purpose of this analysis is to develop biosphere model parameter values related to radionuclide transport and accumulation in the environment. These parameters support calculations of radionuclide concentrations in the environmental media (e.g., soil, crops, animal products, and air) resulting from a given radionuclide concentration at the source of contamination (i.e., either in groundwater or volcanic ash). The analysis was performed in accordance with the TWP (BSC 2003 [163602]). This analysis develops values of parameters associated with many features, events, and processes (FEPs) applicable to the reference biosphere (DTN: M00303SEPFEPS2.000 [162452]), which are addressed in the biosphere model (BSC 2003 [160699]). The treatment of these FEPs is described in BSC (2003 [160699], Section 6.2). Parameter values developed in this report, and the related FEPs, are listed in Table 1-1. The relationship between the parameters and FEPs was based on a comparison of the parameter definition and the FEP descriptions as presented in BSC (2003 [160699], Section 6.2). The parameter values developed in this report support the biosphere model and are reflected in the TSPA through the biosphere dose conversion factors (BDCFs). Biosphere modeling focuses on radionuclides screened for the TSPA-LA (BSC 2002 [160059]). The same list of radionuclides is used in this analysis (Section 6.1.4). The analysis considers two human exposure scenarios (groundwater and volcanic ash) and climate change (Section 6.1.5). This analysis combines and revises two previous reports, ''Transfer Coefficient Analysis'' (CRWMS M & O 2000 [152435]) and ''Environmental Transport Parameter Analysis'' (CRWMS M & O 2001 [152434]), because the new ERMYN biosphere model requires a redefined set of input parameters. The scope of this analysis includes providing a technical basis for the selection of radionuclide- and element-specific biosphere parameters (except for Kd) that are important for calculating BDCFs based on the available radionuclide inventory abstraction data. The environmental transport parameter values were developed specifically for use in the biosphere model and may not be appropriate for other applications.
Author: Kaylie Rasmuson Publisher: ISBN: Category : Languages : en Pages : 270
Book Description
This analysis is one of 10 technical reports that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN) (i.e., the biosphere model). It documents development of agricultural and environmental input parameters for the biosphere model, and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the total system performance assessment (TSPA) for the repository at Yucca Mountain. The ERMYN provides the TSPA with the capability to perform dose assessments. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships between the major activities and their products (the analysis and model reports) that were planned in ''Technical Work Plan for Biosphere Modeling and Expert Support'' (BSC 2004 [DIRS 169573]). The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the ERMYN and its input parameters.
Author: Jesus I. Diaz Publisher: Springer Science & Business Media ISBN: 3642606032 Category : Science Languages : en Pages : 486
Book Description
This book is the culmination of the NATO Advanced Study Institute on The Mathematics of Models for Climatology and Environment which was held at Puerto de la Cruz ,Tenerife, Spain during 11-21 January 1995. One of the main goals of the ASI was to establish a bridge between mathematical modellers on the one hand and physical oceanographers and climatologists on the other. The book is divided into fourth parts containing a total of 16 chapters: Parts I, II and III are devoted to general models and Part IV to models related to some local problems. Most of the mathematical models here considered involve systems of nonlinear partial differential equations. The mathemat ical treatment cover a large list of subjects: existence and uniqueness for well-possed problems, large time behaviour, stability, bifurcation,diagrams of equilibria, conditions for the occurrence of interfaces or free boundaries, numerical algorithms and its implementation, controllability of the problems, etc. I thank Jacques- Louis Lions and Cornelius Johannes van Duijn for their guidance and collaboration as co-directors of the AS!. I also thank J.F.Padial and G. Diaz for their help in the planning and conduct of the ASI as well as in the preparation of this book.
Author: Christoph Müller Publisher: Cabi ISBN: Category : Science Languages : en Pages : 376
Book Description
Soils interact with the biological environment in a number of ways. Our understanding of these interactions can often be enhanced by computer modelling. The primary function of this book is to introduce basic modelling skills and to show how even complex problems in the relationship between soil and the biosphere can be solved using modelling packages. The author presents numerous examples using ModelMaker, an easily learnt software package. Only basic mathematical skills are expected of the reader. A demo of ModelMaker is available on CD from Cherwell Scientific.
Author: George Petropoulos Publisher: CRC Press ISBN: 1466505796 Category : Science Languages : en Pages : 562
Book Description
Integrating decades of research conducted by leading scientists in the field, Remote Sensing of Energy Fluxes and Soil Moisture Content provides an overview of state-of-the-art methods and modeling techniques employed for deriving spatio-temporal estimates of energy fluxes and soil surface moisture from remote sensing. It also underscores the range
Author: Rolf Nieder Publisher: CRC Press ISBN: 9781560229155 Category : Technology & Engineering Languages : en Pages : 800
Book Description
Learn to create and use simulation models—the most reliable and cost-effective tools for predicting real-world results! The Handbook of Processes and Modeling in the Soil-Plant System is the first book to present a holistic view of the processes within the soil-plant-atmosphere continuum. Unlike other publications, which tend to be more specialized, this book covers nearly all of the processes in the soil-plant system, including the fundamental processes of soil formation, degradation, and the dynamics of water and matter. It also illustrates how simulation modeling can be used to understand and forecast multiple interactions among various processes and predict their environmental impact. This unique volume assembles information that until now was scattered among journals, bulletins, reports, and symposia proceedings to present models that simulate almost all of the processes occurring in the soil-plant system and explores the results that these models are capable of producing. With chapters authored by experts with years of research and teaching experience, the Handbook of Processes and Modeling in the Soil-Plant System examines: physical, chemical, and biological soil processes the soil formation and weathering process and its modeling the impact of radioactive fallout on the soil-plant system soil degradation processes and ways to control them water and matter dynamics in the soil-plant system growth and development of crops at various levels of production the potentials and limitations of using simulation models Students, educators, and professionals alike will find the Handbook of Processes and Modeling in the Soil-Plant System an invaluable reference on the soil-plant-atmosphere system and an ideal tool to help develop an effective decision support system.
Author: Prasad Thenkabail Publisher: CRC Press ISBN: 1482282674 Category : Technology & Engineering Languages : en Pages : 2304
Book Description
A volume in the three-volume Remote Sensing Handbook series, Remote Sensing of Water Resources, Disasters, and Urban Studies documents the scientific and methodological advances that have taken place during the last 50 years. The other two volumes in the series are Remotely Sensed Data Characterization, Classification, and Accuracies, and Land Reso
Author: A. J. Smith
Author: A. J. Smith
Author: 
Author: Gordon Bonan
Author: Kaylie Rasmuson
Author: M. Wasiolek
Author: Jesus I. Diaz
Author: Christoph Müller
Author: George Petropoulos
Author: Rolf Nieder
Author: Prasad Thenkabail