Skin Friction and Heat Transfer in Turbulent Boundary Layers as Influenced by Roughness PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Skin Friction and Heat Transfer in Turbulent Boundary Layers as Influenced by Roughness PDF full book. Access full book title Skin Friction and Heat Transfer in Turbulent Boundary Layers as Influenced by Roughness by Milton J. Thompson. Download full books in PDF and EPUB format.
Author: Milton J. Thompson Publisher: ISBN: Category : Languages : en Pages : 96
Book Description
The report provides a summary of theoretical and experimental research on turbulent boundary layers under supersonic free stream conditions. The program included investigations of boundary layer behavior at various Mach Numbers for smooth, adiabatic surfaces, various types of surface roughness, and the combined effects of roughness and heat transfer. The experimental program involved velocity profile measurements and the momentum deficit method of calculating skin friction, determinations of local shear stress values, and the utilization of plug-type calorimeters for determinations of heat transfer rates.
Author: Milton J. Thompson Publisher: ISBN: Category : Languages : en Pages : 96
Book Description
The report provides a summary of theoretical and experimental research on turbulent boundary layers under supersonic free stream conditions. The program included investigations of boundary layer behavior at various Mach Numbers for smooth, adiabatic surfaces, various types of surface roughness, and the combined effects of roughness and heat transfer. The experimental program involved velocity profile measurements and the momentum deficit method of calculating skin friction, determinations of local shear stress values, and the utilization of plug-type calorimeters for determinations of heat transfer rates.
Author: Michael L. Finson Publisher: ISBN: Category : Languages : en Pages : 46
Book Description
A Reynolds stress model for turbulent boundary layers is used to study surface roughness effects on skin friction and heat transfer. The issues of primary interest are the influence of roughness character (element shape and spacing) and the nature of roughness effects at high Mach numbers. Computations based on the model compare satisfactorily with measurements from experiments involving variations in roughness character, in low speed and modestly supersonic conditions. The more limited data base at hypersonic Mach numbers is also examined with reasonable success, although no quantitative explanation is offered for the reduction of heat transfer with increasing roughness observed by Holden at Me = 9.4. The present calculations indicate that the mean velocity is approximately uniform over much of the height range below the tops of the elements, y less than or equal to k. With this constant 'roughness velocity, ' it is simple to estimate the form drag on the elements. This roughness velocity has been investigated by systematically exercising the present model over ranges of potential parameters. The roughness velocity is found to be primarily a function of the projected element frontal area per unit surface area, thus providing a new and simple method for predicting roughness character effects. The model further suggests that increased boundary layer temperatures should be generated by roughness at high edge Mach numbers, which would tend to reduce skin friction and heat transfer, perhaps below smooth wall levels. (Author).
Author: Coleman duP. Donaldson Publisher: ISBN: Category : Aerodynamics Languages : en Pages : 26
Book Description
Abstract: The method presented in NACA TN 2692 for evaluating the skin friction of a turbulent boundary layer in compressible flow on an insulated surface is extended to evaluate the turbulent skin friction and heat transfer in compressible flow on a surface which is heated or cooled. The results of this analysis are in good agreement with the heat transfers measured in flight on the NACA RM-10 missile up to Mach number of 3.8.
Author: Daniel C. Reda Publisher: ISBN: Category : Fluid mechanics Languages : en Pages : 80
Book Description
An experimental program was conducted to investigate effects of roughness, and roughness superimposed on single and/or multiple, shallow, periodic waveforms, on turbulent boundary-layer skin friction and velocity profile, in compressible, adiabatic flow. Test conditions were Mach number = 2.9 and Reynolds number/ft = 2 million to 8 million. The planar models included smooth, sand-grain, machined and molded surface finishes. Direct measurements of surface shear and Pitot/recovery temperature profiles were obtained. (Modified author abstract).
Author: Donald M. Wilson Publisher: ISBN: Category : Heat Languages : en Pages : 82
Book Description
Turbulent boundary-layer heat transfer and skin-friction coefficients were measured on sharp slender cones at a free-stream Mach number of 5.0. Wall-to-stagnation temperature ratios from 0.15 to 0.80 were obtained by precooling or preheating the model. Tests were conducted for a wide range of Reynolds numbers by varying the tunnel supply pressure and temperature, thus providing data for naturally turbulent boundary layers. The experimental results were compared with existing theories which predict convective Stanton number or skin-friction coefficients. These comparisons indicate that the heat-transfer data are best predicted by the Spalding-Chi law and the skin friction by the Sommer-Short reference temperature method. The experimental Reynolds analogy factor is adequately predicted by Colburn's incompressible correlation for wall-to-stagnation temperature ratios above about 0.5. However, for lower wall temperature ratios, the experimental Reynolds analogy factor decreases with decreased temperature ratios in a manner which has not been previously reported. (Author).
Author: National Aeronautics and Space Administration (NASA) Publisher: Createspace Independent Publishing Platform ISBN: 9781723186981 Category : Languages : en Pages : 134
Book Description
The use is studied of smooth heat flux gages on the otherwise very rough SSME fuel pump turbine blades. To gain insights into behavior of such installations, fluid mechanics and heat transfer data were collected and are reported for a turbulent boundary layer over a surface with a step change from a rough surface to a smooth surface. The first 0.9 m length of the flat plate test surface was roughened with 1.27 mm hemispheres in a staggered, uniform array spaced 2 base diameters apart. The remaining 1.5 m length was smooth. The effect of the alignment of the smooth surface with respect to the rough surface was also studied by conducting experiments with the smooth surface aligned with the bases or alternatively with the crests of the roughness elements. Stanton number distributions, skin friction distributions, and boundary layer profiles of temperature and velocity are reported and are compared to previous data for both all rough and all smooth wall cases. The experiments show that the step change from rough to smooth has a dramatic effect on the convective heat transfer. It is concluded that use of smooth heat flux gages on otherwise rough surfaces could cause large errors. Taylor, Robert P. and Coleman, Hugh W. and Taylor, J. Keith and Hosni, M. H. Unspecified Center CONVECTIVE HEAT TRANSFER; FLOW DISTRIBUTION; HEAT FLUX; SURFACE ROUGHNESS; TURBINE BLADES; TURBULENT BOUNDARY LAYER; TURBULENT HEAT TRANSFER; AIR FLOW; FLAT PLATES; FLUID MECHANICS; FUEL PUMPS; SKIN FRICTION; SPACE SHUTTLE MAIN ENGINE; STANTON NUMBER; WALL FLOW...
Author: A. F. Mills Publisher: ISBN: Category : Languages : en Pages : 120
Book Description
The influence of wall roughness on the alteration of the characteristics of the turbulent boundary layer to produce increased heat transfer and skin friction during re-entry is examined. Attention is restricted to roughness heights which are small compared with the boundary layer thickness. It is shown that rough wall transfer rates can be calculated almost as reliably as for smooth walls provided that the geometry of the roughness is known. In this regard it is pointed out that models of roughness effects for use in finite-difference boundary layer calculation procedures should be in the form of drag coefficients and sub-layer Stanton numbers to be applied as 'slip' values at a characteristic roughness height; use of mixing length models of turbulent transport with nonzero wall values is shown to have serious shortcomings. The effect of heat conduction through roughness elements is demonstrated and the implications with respect to the validity of existing sub-layer Stanton number correlations are discussed. A thorough review of the pertinent literature is included with the view towards making this report a self contained treatment of the subject.
Author: Milton J. Thompson
Author: Milton J. Thompson
Author: Michael L. Finson
Author: Coleman duP. Donaldson
Author: Daniel C. Reda
Author: Frank Levi Young
Author: Donald M. Wilson
Author: National Aeronautics and Space Administration (NASA)
Author: A. F. Mills
Author: Morris W. Rubesin
Author: