Author: Itsuki Noda
Publisher: Springer
ISBN: 3642343279
Category : Computers
Languages : en
Pages : 425
Book Description
This book constitutes the refereed proceedings of the Third International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2012, held in Tsukuba, Japan, in November 2012. The 33 revised full papers and presented together with 3 invited talks were carefully reviewed and selected from 46 submissions. Ten papers describe design of complex behaviors of autonomous robots, 9 address software layers, 8 papers refer to related modeling and learning. The papers are organized in topical sections on mobile robots, software modeling and architecture and humanoid and biped robots.
Simulation, Modeling, and Programming for Autonomous Robots
Simulation, Modeling, and Programming for Autonomous Robots
Author: Davide Brugali
Publisher: Springer
ISBN: 3319119001
Category : Computers
Languages : en
Pages : 606
Book Description
This book constitutes the refereed proceedings of the 4th International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2014, held in Bergamo, Italy, in October 2014. The 49 revised full papers presented were carefully reviewed and selected from 62 submissions. The papers are organized in topical sections on simulation, modeling, programming, architectures, methods and tools, and systems and applications.
Publisher: Springer
ISBN: 3319119001
Category : Computers
Languages : en
Pages : 606
Book Description
This book constitutes the refereed proceedings of the 4th International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2014, held in Bergamo, Italy, in October 2014. The 49 revised full papers presented were carefully reviewed and selected from 62 submissions. The papers are organized in topical sections on simulation, modeling, programming, architectures, methods and tools, and systems and applications.
Simulation, Modeling, and Programming for Autonomous Robots
Author: Noriako Ando
Publisher: Springer Science & Business Media
ISBN: 3642173187
Category : Computers
Languages : en
Pages : 572
Book Description
Why are the many highly capable autonomous robots that have been promised for novel applications driven by society, industry, and research not available - day despite the tremendous progress in robotics science and systems achieved during the last decades? Unfortunately, steady improvements in speci?c robot abilities and robot hardware have not been matched by corresponding robot performance in real world environments. This is mainly due to the lack of - vancements in robot software that master the development of robotic systems of ever increasing complexity. In addition, fundamental open problems are still awaiting sound answers while the development of new robotics applications s- fersfromthelackofwidelyusedtools,libraries,andalgorithmsthataredesigned in a modular and performant manner with standardized interfaces. Simulation environments are playing a major role not only in reducing development time and cost, e. g. , by systematic software- or hardware-in-the-loop testing of robot performance, but also in exploring new types of robots and applications. H- ever,their use may still be regardedwith skepticism. Seamless migrationof code using robot simulators to real-world systems is still a rare circumstance, due to the complexity of robot, world, sensor, and actuator modeling. These challenges drive the quest for the next generation of methodologies and tools for robot development. The objective of the International Conference on Simulation, Modeling, and ProgrammingforAutonomous Robots (SIMPAR) is to o?er a unique forum for these topics and to bring together researchersfrom academia and industry to identify and solve the key issues necessary to ease the development of increasingly complex robot software.
Publisher: Springer Science & Business Media
ISBN: 3642173187
Category : Computers
Languages : en
Pages : 572
Book Description
Why are the many highly capable autonomous robots that have been promised for novel applications driven by society, industry, and research not available - day despite the tremendous progress in robotics science and systems achieved during the last decades? Unfortunately, steady improvements in speci?c robot abilities and robot hardware have not been matched by corresponding robot performance in real world environments. This is mainly due to the lack of - vancements in robot software that master the development of robotic systems of ever increasing complexity. In addition, fundamental open problems are still awaiting sound answers while the development of new robotics applications s- fersfromthelackofwidelyusedtools,libraries,andalgorithmsthataredesigned in a modular and performant manner with standardized interfaces. Simulation environments are playing a major role not only in reducing development time and cost, e. g. , by systematic software- or hardware-in-the-loop testing of robot performance, but also in exploring new types of robots and applications. H- ever,their use may still be regardedwith skepticism. Seamless migrationof code using robot simulators to real-world systems is still a rare circumstance, due to the complexity of robot, world, sensor, and actuator modeling. These challenges drive the quest for the next generation of methodologies and tools for robot development. The objective of the International Conference on Simulation, Modeling, and ProgrammingforAutonomous Robots (SIMPAR) is to o?er a unique forum for these topics and to bring together researchersfrom academia and industry to identify and solve the key issues necessary to ease the development of increasingly complex robot software.
Simulation, Modeling, and Programming for Autonomous Robots
Author: Stefano Carpin
Publisher: Springer Science & Business Media
ISBN: 3540890750
Category : Computers
Languages : en
Pages : 364
Book Description
This book constitutes the refereed proceedings of the First International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2008, held in Venice, Italy, in November 2008. The 29 revised full papers and 21 revised poster papers presented were carefully reviewed and selected from 42 submissions. The papers address all current issues of robotics applications and simulation environments thereof, such as 3D robot simulation, reliability, scalability and validation of robot simulation, simulated sensors and actuators, offline simulation of robot design, online simulation with realtime constraints, simulation with software/hardware-in-the-loop, middleware for robotics, modeling framework for robots and environments, testing and validation of robot control software, standardization for robotic services, communication infrastructures in distributed robotics, interaction between sensor networks and robots, human robot interaction, and multirobot. The papers are organized in topical sections on simulation, programming, and applications.
Publisher: Springer Science & Business Media
ISBN: 3540890750
Category : Computers
Languages : en
Pages : 364
Book Description
This book constitutes the refereed proceedings of the First International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2008, held in Venice, Italy, in November 2008. The 29 revised full papers and 21 revised poster papers presented were carefully reviewed and selected from 42 submissions. The papers address all current issues of robotics applications and simulation environments thereof, such as 3D robot simulation, reliability, scalability and validation of robot simulation, simulated sensors and actuators, offline simulation of robot design, online simulation with realtime constraints, simulation with software/hardware-in-the-loop, middleware for robotics, modeling framework for robots and environments, testing and validation of robot control software, standardization for robotic services, communication infrastructures in distributed robotics, interaction between sensor networks and robots, human robot interaction, and multirobot. The papers are organized in topical sections on simulation, programming, and applications.
Simulation, Modeling, and Programming for Autonomous Robots
Author: Stefano Carpin
Publisher:
ISBN: 9788354089070
Category : Artificial intelligence
Languages : en
Pages : 0
Book Description
This book constitutes the refereed proceedings of the First International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2008, held in Venice, Italy, in November 2008. The 29 revised full papers and 21 revised poster papers presented were carefully reviewed and selected from 42 submissions. The papers address all current issues of robotics applications and simulation environments thereof, such as 3D robot simulation, reliability, scalability and validation of robot simulation, simulated sensors and actuators, offline simulation of robot design, online simulation with realtime constraints, simulation with software/hardware-in-the-loop, middleware for robotics, modeling framework for robots and environments, testing and validation of robot control software, standardization for robotic services, communication infrastructures in distributed robotics, interaction between sensor networks and robots, human robot interaction, and multirobot. The papers are organized in topical sections on simulation, programming, and applications.
Publisher:
ISBN: 9788354089070
Category : Artificial intelligence
Languages : en
Pages : 0
Book Description
This book constitutes the refereed proceedings of the First International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2008, held in Venice, Italy, in November 2008. The 29 revised full papers and 21 revised poster papers presented were carefully reviewed and selected from 42 submissions. The papers address all current issues of robotics applications and simulation environments thereof, such as 3D robot simulation, reliability, scalability and validation of robot simulation, simulated sensors and actuators, offline simulation of robot design, online simulation with realtime constraints, simulation with software/hardware-in-the-loop, middleware for robotics, modeling framework for robots and environments, testing and validation of robot control software, standardization for robotic services, communication infrastructures in distributed robotics, interaction between sensor networks and robots, human robot interaction, and multirobot. The papers are organized in topical sections on simulation, programming, and applications.
Hands-On ROS for Robotics Programming
Author: Bernardo Ronquillo Japón
Publisher: Packt Publishing Ltd
ISBN: 183855288X
Category : Computers
Languages : en
Pages : 414
Book Description
Take your ROS skills to the next level by implementing complex robot structures in a ROS simulation Key FeaturesLearn fundamental ROS concepts and apply them to solve navigation tasksWork with single board computers to program smart behavior in mobile robotsUnderstand how specific characteristics of the physical environment influence your robot’s performanceBook Description Connecting a physical robot to a robot simulation using the Robot Operating System (ROS) infrastructure is one of the most common challenges faced by ROS engineers. With this book, you'll learn how to simulate a robot in a virtual environment and achieve desired behavior in equivalent real-world scenarios. This book starts with an introduction to GoPiGo3 and the sensors and actuators with which it is equipped. You'll then work with GoPiGo3's digital twin by creating a 3D model from scratch and running a simulation in ROS using Gazebo. Next, the book will show you how to use GoPiGo3 to build and run an autonomous mobile robot that is aware of its surroundings. Finally, you'll find out how a robot can learn tasks that have not been programmed in the code but are acquired by observing its environment. You'll even cover topics such as deep learning and reinforcement learning. By the end of this robot programming book, you'll be well-versed with the basics of building specific-purpose applications in robotics and developing highly intelligent autonomous robots from scratch. What you will learnGet to grips with developing environment-aware robotsGain insights into how your robots will react in physical environmentsBreak down a desired behavior into a chain of robot actionsRelate data from sensors with context to produce adaptive responsesApply reinforcement learning to allow your robot to learn by trial and errorImplement deep learning to enable your robot to recognize its surroundingsWho this book is for If you are an engineer looking to build AI-powered robots using the ROS framework, this book is for you. Robotics enthusiasts and hobbyists who want to develop their own ROS robotics projects will also find this book useful. Knowledge of Python and/or C++ programming and familiarity with single board computers such as Raspberry Pi is necessary to get the most out of this book.
Publisher: Packt Publishing Ltd
ISBN: 183855288X
Category : Computers
Languages : en
Pages : 414
Book Description
Take your ROS skills to the next level by implementing complex robot structures in a ROS simulation Key FeaturesLearn fundamental ROS concepts and apply them to solve navigation tasksWork with single board computers to program smart behavior in mobile robotsUnderstand how specific characteristics of the physical environment influence your robot’s performanceBook Description Connecting a physical robot to a robot simulation using the Robot Operating System (ROS) infrastructure is one of the most common challenges faced by ROS engineers. With this book, you'll learn how to simulate a robot in a virtual environment and achieve desired behavior in equivalent real-world scenarios. This book starts with an introduction to GoPiGo3 and the sensors and actuators with which it is equipped. You'll then work with GoPiGo3's digital twin by creating a 3D model from scratch and running a simulation in ROS using Gazebo. Next, the book will show you how to use GoPiGo3 to build and run an autonomous mobile robot that is aware of its surroundings. Finally, you'll find out how a robot can learn tasks that have not been programmed in the code but are acquired by observing its environment. You'll even cover topics such as deep learning and reinforcement learning. By the end of this robot programming book, you'll be well-versed with the basics of building specific-purpose applications in robotics and developing highly intelligent autonomous robots from scratch. What you will learnGet to grips with developing environment-aware robotsGain insights into how your robots will react in physical environmentsBreak down a desired behavior into a chain of robot actionsRelate data from sensors with context to produce adaptive responsesApply reinforcement learning to allow your robot to learn by trial and errorImplement deep learning to enable your robot to recognize its surroundingsWho this book is for If you are an engineer looking to build AI-powered robots using the ROS framework, this book is for you. Robotics enthusiasts and hobbyists who want to develop their own ROS robotics projects will also find this book useful. Knowledge of Python and/or C++ programming and familiarity with single board computers such as Raspberry Pi is necessary to get the most out of this book.
Introduction to Autonomous Robots
Author: Nikolaus Correll
Publisher:
ISBN: 9780692700877
Category :
Languages : en
Pages : 226
Book Description
This book introduces concepts in mobile, autonomous robotics to 3rd-4th year students in Computer Science or a related discipline. The book covers principles of robot motion, forward and inverse kinematics of robotic arms and simple wheeled platforms, perception, error propagation, localization and simultaneous localization and mapping. The cover picture shows a wind-up toy that is smart enough to not fall off a table just using intelligent mechanism design and illustrate the importance of the mechanism in designing intelligent, autonomous systems. This book is open source, open to contributions, and released under a creative common license.
Publisher:
ISBN: 9780692700877
Category :
Languages : en
Pages : 226
Book Description
This book introduces concepts in mobile, autonomous robotics to 3rd-4th year students in Computer Science or a related discipline. The book covers principles of robot motion, forward and inverse kinematics of robotic arms and simple wheeled platforms, perception, error propagation, localization and simultaneous localization and mapping. The cover picture shows a wind-up toy that is smart enough to not fall off a table just using intelligent mechanism design and illustrate the importance of the mechanism in designing intelligent, autonomous systems. This book is open source, open to contributions, and released under a creative common license.
ROS Robotics By Example
Author: Carol Fairchild
Publisher: Packt Publishing Ltd
ISBN: 1785286706
Category : Computers
Languages : en
Pages : 428
Book Description
Bring life to your robot using ROS robotic applications About This Book This book will help you boost your knowledge of ROS and give you advanced practical experience you can apply to your ROS robot platforms This is the only book that offers you step-by-step instructions to solidify your ROS understanding and gain experience using ROS tools From eminent authors, this book offers you a plethora of fun-filled examples to make your own quadcopter, turtlebot, and two-armed robots Who This Book Is For If you are a robotics developer, whether a hobbyist, researchers or professional, and are interested in learning about ROS through a hands-on approach, then this book is for you. You are encouraged to have a working knowledge of GNU/Linux systems and Python. What You Will Learn Get to know the fundamentals of ROS and apply its concepts to real robot examples Control a mobile robot to navigate autonomously in an environment Model your robot designs using URDF and Xacro, and operate them in a ROS Gazebo simulation Control a 7 degree-of-freedom robot arm for visual servoing Fly a quadcopter to autonomous waypoints Gain working knowledge of ROS tools such as Gazebo, rviz, rqt, and Move-It Control robots with mobile devices and controller boards In Detail The visionaries who created ROS developed a framework for robotics centered on the commonality of robotic systems and exploited this commonality in ROS to expedite the development of future robotic systems. From the fundamental concepts to advanced practical experience, this book will provide you with an incremental knowledge of the ROS framework, the backbone of the robotics evolution. ROS standardizes many layers of robotics functionality from low-level device drivers to process control to message passing to software package management. This book provides step-by-step examples of mobile, armed, and flying robots, describing the ROS implementation as the basic model for other robots of these types. By controlling these robots, whether in simulation or in reality, you will use ROS to drive, move, and fly robots using ROS control. Style and approach This is an easy-to-follow guide with hands-on examples of ROS robots, both real and in simulation.
Publisher: Packt Publishing Ltd
ISBN: 1785286706
Category : Computers
Languages : en
Pages : 428
Book Description
Bring life to your robot using ROS robotic applications About This Book This book will help you boost your knowledge of ROS and give you advanced practical experience you can apply to your ROS robot platforms This is the only book that offers you step-by-step instructions to solidify your ROS understanding and gain experience using ROS tools From eminent authors, this book offers you a plethora of fun-filled examples to make your own quadcopter, turtlebot, and two-armed robots Who This Book Is For If you are a robotics developer, whether a hobbyist, researchers or professional, and are interested in learning about ROS through a hands-on approach, then this book is for you. You are encouraged to have a working knowledge of GNU/Linux systems and Python. What You Will Learn Get to know the fundamentals of ROS and apply its concepts to real robot examples Control a mobile robot to navigate autonomously in an environment Model your robot designs using URDF and Xacro, and operate them in a ROS Gazebo simulation Control a 7 degree-of-freedom robot arm for visual servoing Fly a quadcopter to autonomous waypoints Gain working knowledge of ROS tools such as Gazebo, rviz, rqt, and Move-It Control robots with mobile devices and controller boards In Detail The visionaries who created ROS developed a framework for robotics centered on the commonality of robotic systems and exploited this commonality in ROS to expedite the development of future robotic systems. From the fundamental concepts to advanced practical experience, this book will provide you with an incremental knowledge of the ROS framework, the backbone of the robotics evolution. ROS standardizes many layers of robotics functionality from low-level device drivers to process control to message passing to software package management. This book provides step-by-step examples of mobile, armed, and flying robots, describing the ROS implementation as the basic model for other robots of these types. By controlling these robots, whether in simulation or in reality, you will use ROS to drive, move, and fly robots using ROS control. Style and approach This is an easy-to-follow guide with hands-on examples of ROS robots, both real and in simulation.
Proceedings of the 6th Ph.D. Retreat of the HPI Research School on Service-oriented Systems Engineering
Author: Meinel, Christoph
Publisher: Universitätsverlag Potsdam
ISBN: 3869562560
Category :
Languages : en
Pages : 248
Book Description
Publisher: Universitätsverlag Potsdam
ISBN: 3869562560
Category :
Languages : en
Pages : 248
Book Description
Our Robots, Ourselves
Author: David A. Mindell
Publisher: Penguin
ISBN: 0698157664
Category : Business & Economics
Languages : en
Pages : 274
Book Description
“[An] essential book… it is required reading as we seriously engage one of the most important debates of our time.”—Sherry Turkle, author of Reclaiming Conversation: The Power of Talk in a Digital Age From drones to Mars rovers—an exploration of the most innovative use of robots today and a provocative argument for the crucial role of humans in our increasingly technological future. In Our Robots, Ourselves, David Mindell offers a fascinating behind-the-scenes look at the cutting edge of robotics today, debunking commonly held myths and exploring the rapidly changing relationships between humans and machines. Drawing on firsthand experience, extensive interviews, and the latest research from MIT and elsewhere, Mindell takes us to extreme environments—high atmosphere, deep ocean, and outer space—to reveal where the most advanced robotics already exist. In these environments, scientists use robots to discover new information about ancient civilizations, to map some of the world’s largest geological features, and even to “commute” to Mars to conduct daily experiments. But these tools of air, sea, and space also forecast the dangers, ethical quandaries, and unintended consequences of a future in which robotics and automation suffuse our everyday lives. Mindell argues that the stark lines we’ve drawn between human and not human, manual and automated, aren’t helpful for understanding our relationship with robotics. Brilliantly researched and accessibly written, Our Robots, Ourselves clarifies misconceptions about the autonomous robot, offering instead a hopeful message about what he calls “rich human presence” at the center of the technological landscape we are now creating.
Publisher: Penguin
ISBN: 0698157664
Category : Business & Economics
Languages : en
Pages : 274
Book Description
“[An] essential book… it is required reading as we seriously engage one of the most important debates of our time.”—Sherry Turkle, author of Reclaiming Conversation: The Power of Talk in a Digital Age From drones to Mars rovers—an exploration of the most innovative use of robots today and a provocative argument for the crucial role of humans in our increasingly technological future. In Our Robots, Ourselves, David Mindell offers a fascinating behind-the-scenes look at the cutting edge of robotics today, debunking commonly held myths and exploring the rapidly changing relationships between humans and machines. Drawing on firsthand experience, extensive interviews, and the latest research from MIT and elsewhere, Mindell takes us to extreme environments—high atmosphere, deep ocean, and outer space—to reveal where the most advanced robotics already exist. In these environments, scientists use robots to discover new information about ancient civilizations, to map some of the world’s largest geological features, and even to “commute” to Mars to conduct daily experiments. But these tools of air, sea, and space also forecast the dangers, ethical quandaries, and unintended consequences of a future in which robotics and automation suffuse our everyday lives. Mindell argues that the stark lines we’ve drawn between human and not human, manual and automated, aren’t helpful for understanding our relationship with robotics. Brilliantly researched and accessibly written, Our Robots, Ourselves clarifies misconceptions about the autonomous robot, offering instead a hopeful message about what he calls “rich human presence” at the center of the technological landscape we are now creating.