Simple Measuring and Monitoring of Movement in Low-rise Buildings PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Simple Measuring and Monitoring of Movement in Low-rise Buildings PDF full book. Access full book title Simple Measuring and Monitoring of Movement in Low-rise Buildings by . Download full books in PDF and EPUB format.
Author: Publisher: ISBN: 9780851253817 Category : Masonry Languages : en Pages : 4
Book Description
Cracks appear in masonry buildings for a variety of reasons: these are discussed in Digests 75 and 251. Determining the cause of cracking is usually easier if cracks and movement are monitored. This can establish if there is any deterioration and if there is any seasonal or other pattern. This Digest discusses simple but reliable methods of measuring and recording movement and cracking in low-rise buildings. It gives full details of the recommended methods, comments on others and warns against some inferior techniques. The subjects dealt with are: in Part 1: measurement and monitoring of cracks. in Part 2: determination of settlement or heave that has already taken place; measurement of the out-of-plumb of walls.
Author: Publisher: ISBN: 9780851253817 Category : Masonry Languages : en Pages : 4
Book Description
Cracks appear in masonry buildings for a variety of reasons: these are discussed in Digests 75 and 251. Determining the cause of cracking is usually easier if cracks and movement are monitored. This can establish if there is any deterioration and if there is any seasonal or other pattern. This Digest discusses simple but reliable methods of measuring and recording movement and cracking in low-rise buildings. It gives full details of the recommended methods, comments on others and warns against some inferior techniques. The subjects dealt with are: in Part 1: measurement and monitoring of cracks. in Part 2: determination of settlement or heave that has already taken place; measurement of the out-of-plumb of walls.
Author: J. Moore Publisher: Springer Science & Business Media ISBN: 1475758944 Category : Science Languages : en Pages : 164
Book Description
There is an increasing number of buildings that require informed decisions to be made about their continued safety and serviceability. Although social and economic issues are often all-important influences, the technical issues nevertheless need to be addressed objectively, efficiently and reliably. This book shows how monitoring the physical behaviour of a structure can assist the engineer to meet these conditions when making an assessment. The book is aimed primarily at the practising engineer charged with making recommendations in respect of safety and serviceability. By the same token, it will be of value to the client specifying a brief for assessment or evaluating the report of an investigation which involves monitoring. The book will also be one of reference for those engaged in research involving monitoring, and an aid to the advanced student who needs to understand better the full-scale performance in service of building structures. The need to assess safety and serviceability may arise for a variety of reasons, ranging from problems developing in service to change of use or the introduction of innovative features at the design stage. These reasons are explored in the first chapter which establishes a philosophy by which the assessing engineer can determine appropriate courses of action. Observations and measurements which do not address the real issues are worthless but too much information which cannot be effectively digested and interpreted is also not useful.
Author: Roger Greeno Publisher: Routledge ISBN: 1317902815 Category : Technology & Engineering Languages : en Pages : 327
Book Description
Introduction to Building provides a comprehensive introduction to various aspects of development and associated building procedures, from initial planning and design through procurement of building work, contractual arrangements and construction techniques. Now in its Fifth Edition, this popular text continues to present an authoritative overview of the many design and practical considerations associated with the creation and maintenance of modern buildings, including repair of existing buildings and traditional construction procedures. Topics covered include the functional requirements of a building: appearance, durability, dimensional suitability, strength and stability, weather exclusion, sound control, thermal comfort, fire protection, lighting and ventilating, sanitation and drainage, security, cost, sustainability, building processes, the building team, communication and construction methods.
Author: Graham Armer Publisher: CRC Press ISBN: 0203478010 Category : Technology & Engineering Languages : en Pages : 178
Book Description
This book details the latest methods available for the in-service assessment of buildings and other structures. Written by a team of international experts, it provides detailed information and practical advice on key issues such as safety assessment and performance monitoring and evaluation. All the leading methodologies are covered, including phot
Author: Hilary Skinner Publisher: ISBN: Category : Brick walls Languages : en Pages : 12
Book Description
This Digest provides guidance on the assessment of the significance of tilt of low-rise buildings resulting from foundation movement. It should assist building professionals, property valuers and insurance advisors in assessing the significance of tilt and the need for expert advice. The issues of acceptability and tolerability of tilt are particularly acute in low-rise housing. The shortage of good building land and the consequent necessity of siting new housing developments on more marginal sites gives added importance to the subject. This Digest is complementary to Digest 251 which deals with structural distortion and cracking caused by foundation movement.
Author: London District Surveyors Association Publisher: Routledge ISBN: 1135808937 Category : Architecture Languages : en Pages : 1612
Book Description
This fully revised essential reference takes into account all important aspects of building control, including new legislation up to Spring 2000 with important revisions to parts B, K, M and N. Each chapter explains the approved document. Publication lists and relevant sources of information are also included, together with annexes devoted to legislation relevant to the construction industry, determinations made by the Secretary of State and sample check lists. Building Regulations Explained will be of wide appeal to architects, planners, surveyors, builders, building control professionals (including new non-NHBC approved inspectors), regulators and students.
Author: David S. Watt Publisher: John Wiley & Sons ISBN: 1444314033 Category : Technology & Engineering Languages : en Pages : 320
Book Description
Building pathology provides an interdisciplinary approach to the study of defects and performance in order to develop appropriate remedial and management solutions. It considers how the structure and materials of a building relate to its environment, its occupants and the way the building is used, so as to develop a better understanding of building failures. This book provides a well illustrated introduction to the discipline of building pathology, bridging the gap between current approaches to the surveying of buildings and the detailed study of defect diagnosis, prognosis and remediation. It features a number of case studies and a detailed set of references and further reading. This second edition has been updated to reflect changes in legislation, guidance and construction, and provides new case studies that demonstrate the breadth and depth of the subject.
Author: fib Fédération internationale du béton Publisher: fib Fédération internationale du béton ISBN: 2883941025 Category : Technology & Engineering Languages : en Pages : 482
Book Description
The third edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) tofib Model Code for Concrete Structures 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the textbook.
Author: 
Author: 
Author: J. Moore
Author: Roger Greeno
Author: Graham Armer
Author: Hilary Skinner
Author: London District Surveyors Association
Author: Luigia Binda
Author: David S. Watt
Author: fib Fédération internationale du béton
Author: