Author: Swami Saran Publisher: CRC Press ISBN: 1351241281 Category : Science Languages : en Pages : 296
Book Description
The book offers a systematic analysis of footings (i.e. shallow foundations) in a realistic way, using constitutive relationships of the soil. The aim of the book is to deal with the theme holistically, involving the determination of the constitutive law of the soil, and then proportioning the footing occurring in different situations in actual practice. The book has eleven chapters. After giving an introduction and scope of the book in the first chapter, second and third chapters are respectively devoted to constitutive laws of soil and basic stress equations. In the third chapter analysis of strip footings subjected to central vertical load has been dealt. This analysis has been extended for eccentric –inclined load in the fifth chapter. Since problems of shallow foundations resting adjacent to a slope are of prime importance, this aspect has been dealt in sixth chapter. In the seventh chapter, analysis pertaining to square and rectangular footings have been presented. Effect of interference between adjacent footing is covered in chapter eight. Since ring footings are usually provided for tanks, silos, towers etc., ninth chapter is devoted to this. Added attraction of the book is its chapter ten in which footings located in seismic regions have been covered. Effect of embedment below the ground surface on the behavior of footings located both in non-seismic and seismic regions has been dealt in the chapter eleven. The book is intended for senior undergraduate, postgraduate and Ph.D. students of civil engineering, research scholars, practicing engineers, teachers and academicians. The analyses are based on the latest information available. A number of illustrated examples have been included in the text. SI units have been used in the book.
Author: Yung Ming Cheng Publisher: CRC Press ISBN: 1040016316 Category : Technology & Engineering Languages : en Pages : 713
Book Description
Analysis, Design and Construction of Foundations covers the key concepts in the analysis and design of foundation systems, balancing theory with engineering practice. The book examines in depth the methods used for the analysis, design and construction of shallow foundations, deep foundations, excavation and lateral support systems, slope stability and stabilization and ground monitoring for proper site management. Some new and innovative foundation construction methods are also introduced. It is illustrated with case studies of failures and defects from actual construction projects. This second edition is extensively revised and developed to include a new chapter on numerical methods in geotechnical engineering, as well as a large number of new construction drawings, project photos and construction method statements from existing projects to give the book a stronger professional application and connection to engineering practice. It also covers some new advanced theoretical concepts not covered in other texts, making it useful in both the theoretical and practical aspects. It is ideal for senior undergraduates and graduate students, academics and consulting geotechnical engineers.
Author: Hendrik Sturm Publisher: KIT Scientific Publishing ISBN: 3866444133 Category : Engineering (General). Civil engineering (General) Languages : en Pages : 154
Book Description
"This work presents the results of model tests and numerical simulations of shallow foundations subjected to cyclic loads typical of offshore loadings. Small-scale model tests on a shallow foundation, subjected alternately to cyclic loads with large and small amplitudes, have shown that the accumulated rotations due to large amplitude loads reduce during later phases with smaller amplitudes. Numerical simulations have revealed that this behaviour of cyclically loaded shallow foundations is quantitatively influenced by the load amplitude and direction, and number of load cycles. This work concludes with a proposal for foundation geometries that efficiently resist offshore cyclic loads."--Page 4 of cover.
Author: Jonathan Knappett Publisher: CRC Press ISBN: 1351052721 Category : Technology & Engineering Languages : en Pages : 583
Book Description
Craig’s Soil Mechanics continues to evolve and remain the definitive text for civil engineering students worldwide. It covers fundamental soil mechanics and its application in applied geotechnical engineering from A to Z and at the right depth for an undergraduate civil engineer, with sufficient extension material for supporting MSc level courses, and with practical examples and digital tools to make it a useful reference work for practising engineers. This new edition now includes: Restructured chapters on foundations and earthworks, the latter including new material on working platforms and collapse of underground cavities (sinkhole formation). New mobilised-stress-based deformation methods that can straightforwardly be used with both linear and non-linear soil stiffness models and field measurements of shear wave velocity, for serviceability limit state design. Extended sets of correlations for making sensible first estimates of soil parameters, adding deformation-based parameters for broader coverage than the Eighth Edition. Extended section on robust statistical selection of characteristic soil parameters. Greater use of consolidation theory throughout in determining whether actions, processes and laboratory/in-situ tests are drained or undrained. Extended chapter on in-situ testing, adding the Flat Dilatometer Test (DMT), and interpretation of consolidation parameters from CPTU and DMT testing. An updated section on pile load testing. Additional worked examples and end-of-chapter problems covering new material, with fully worked solutions for lecturers. The electronic resources on the book’s companion website are developed further, with the addition of two new spreadsheet numerical analysis tools and improvement of existing tools from the Eighth Edition. Using these, readers can take real soil test data, interpret its mechanical properties and apply these to a range of common geotechnical design problems at ultimate and serviceability limiting states.
Author: I Antonescu Publisher: CRC Press ISBN: 1000100375 Category : Education Languages : en Pages : 537
Book Description
This volume contains papers and reports from the Conference held in Romania, June 2000. The book covers many topics, for example, place, role and content of geotechnical engineering in civil, environmental and earthquake engineering.
Author: Kok-Kwang Phoon Publisher: CRC Press ISBN: 0203934245 Category : Technology & Engineering Languages : en Pages : 545
Book Description
Reliability-based design is the only engineering methodology currently available which can ensure self-consistency in both physical and probabilistic terms. It is also uniquely compatible with the theoretical basis underlying other disciplines such as structural design. It is especially relevant as geotechnical design becomes subject to increasing codification and to code harmonization across national boundaries and material types. Already some codes of practice describe the principles and requirements for safety, serviceability, and durability of structures in reliability terms. This book presents practical computational methods in concrete steps that can be followed by practitioners and students. It also provides geotechnical examples illustrating reliability analysis and design. It aims to encourage geotechnical engineers to apply reliability-based design in a realistic context that recognises the complex variabilities in geomaterials and model uncertainties arising from a profession steeped in empiricism. By focusing on learning through computations and examples, this book serves as a valuable reference for engineers and a resource for students.
Author: The Organizing Committee of the 16th ICSMGE Publisher: IOS Press ISBN: 1614996563 Category : Technology & Engineering Languages : en Pages : 3742
Book Description
The 16th ICSMGE responds to the needs of the engineering and construction community, promoting dialog and exchange between academia and practice in various aspects of soil mechanics and geotechnical engineering. This is reflected in the central theme of the conference 'Geotechnology in Harmony with the Global Environment'. The proceedings of the conference are of great interest for geo-engineers and researchers in soil mechanics and geotechnical engineering. Volume 1 contains 5 plenary session lectures, the Terzaghi Oration, Heritage Lecture, and 3 papers presented in the major project session. Volumes 2, 3, and 4 contain papers with the following topics: Soil mechanics in general; Infrastructure and mobility; Environmental issues of geotechnical engineering; Enhancing natural disaster reduction systems; Professional practice and education. Volume 5 contains the report of practitioner/academic forum, 20 general reports, a summary of the sessions and workshops held during the conference.
Author: Rolando P. Orense Publisher: CRC Press ISBN: 0203838203 Category : Technology & Engineering Languages : en Pages : 258
Book Description
Soil-Foundation-Structure Interaction contains selected papers presented at the International Workshop on Soil-Foundation-Structure Interaction held in Auckland, New Zealand from 26-27 November 2009. The workshop was the venue for an international exchange of ideas, disseminating information about experiments, numerical models and practical en
Author: Charles W.W. Ng Publisher: CRC Press ISBN: 0203879988 Category : Technology & Engineering Languages : en Pages : 886
Book Description
This volume comprises a collection of four special lectures, six general reports and 112 papers presented at the Sixth International Symposium of Geotechnical Aspects of Underground Construction in Soft Ground (IS-Shanghai) held between 10 and 12 April 2008 in Shanghai, China.The Symposium was organised by Tongji University and the following t
Author: Michele Maugeri Publisher: Springer Science & Business Media ISBN: 3319031821 Category : Science Languages : en Pages : 391
Book Description
Pseudo-static analysis is still the most-used method to assess the stability of geotechnical systems that are exposed to earthquake forces. However, this method does not provide any information about the deformations and permanent displacements induced by seismic activity. Moreover, it is questionable to use this approach when geotechnical systems are affected by frequent and rare seismic events. Incidentally, the peak ground acceleration has increased from 0.2-0.3 g in the seventies to the current value of 0.6-0.8 g. Therefore, a shift from the pseudo-static approach to performance-based analysis is needed. Over the past five years considerable progress has been made in Earthquake Geotechnical Engineering Design (EGED). The most recent advances are presented in this book in 6 parts. The evaluation of the site amplification is covered in Part I of the book. In Part II the evaluation of the soil foundation stability against natural slope failure and liquefaction is treated. In the following 3 Parts of the book the EGED for different geotechnical systems is presented as follows: the design of levees and dams including natural slopes in Part III; the design of foundations and soil structure interaction analysis in Part IV; underground structures in Part V. Finally in Part VI, new topics like the design of reinforced earth retaining walls and landfills are covered.
Author: Swami Saran
Author: Yung Ming Cheng
Author: Hendrik Sturm
Author: Jonathan Knappett
Author: I Antonescu
Author: Kok-Kwang Phoon
Author: The Organizing Committee of the 16th ICSMGE
Author: Rolando P. Orense
Author: Charles W.W. Ng
Author: Michele Maugeri