Author: Publisher:
ISBN:
Category : Power resources
Languages : en
Pages : 782
Book Description
Seismic Engineering for Piping Systems, Tanks, and Power Plant Equipment
Author: Publisher:
ISBN:
Category : Earthquake engineering
Languages : en
Pages : 262
Book Description
Energy Research Abstracts
Author: Proceedings of the U.S. Nuclear Regulatory Commission ... Water Reactor Safety Research Information Meeting
Author: ERDA Energy Research Abstracts
Author: Advances in Dynamics of Piping and Structural Components
Author: Howard ChungPublisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 100
Book Description
INIS Atomindex
Author: Lees' Loss Prevention in the Process Industries
Author: Frank LeesPublisher: Elsevier
ISBN: 0080489338
Category : Technology & Engineering
Languages : en
Pages : 3708
Book Description
Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field
Earthquake Engineering for Nuclear Facilities
Author: Masanori HamadaPublisher: Springer
ISBN: 9811025169
Category : Technology & Engineering
Languages : en
Pages : 304
Book Description
This book is a comprehensive compilation of earthquake- and tsunami-related technologies and knowledge for the design and construction of nuclear facilities. As such, it covers a wide range of fields including civil engineering, architecture, geotechnical engineering, mechanical engineering, and nuclear engineering, for the development of new technologies providing greater resistance against earthquakes and tsunamis. It is crucial both for students of nuclear energy courses and for young engineers in nuclear power generation industries to understand the basics and principles of earthquake- and tsunami-resistant design of nuclear facilities. In Part I, "Seismic Design of Nuclear Power Plants", the design of nuclear power plants to withstand earthquakes and tsunamis is explained, focusing on buildings, equipment's, and civil engineering structures. In Part II, "Basics of Earthquake Engineering", fundamental knowledge of earthquakes and tsunamis as well as the dynamic response of structures and foundation ground are explained.
Seismic Design for Engineering Plant
Author: Chris EalingPublisher: John Wiley & Sons
ISBN: 9781860583643
Category : Technology & Engineering
Languages : en
Pages : 218
Book Description
The importance of continuous research into Seismic Design for Engineering Plant can never be underestimated. Earthquake disaster prevention is a fascinating area requiring ingenious solutions to its unique problems. The benefits of sharing information from developments in this field are also of vital importance. This new book describes and assesses the seismic requirements for different types of structures. In focussing on nuclear chemical plants critical guidance is given on design and cost-effective methods. Bringing together valuable experience from a wide range of disciplines, this important volume covers an informative selection of topics. Contents include: Introduction to Seismic Design Expected accelerations and ways to minimize interaction between structural and mechanical components The practical aspects of designing and assessing mechanical handling equipment for seismic events Nuclear safety requirements for travelling cranes Overview of vessel seismic design Seismic qualification of existing pipework in UK nuclear power plants Construction of a three-dimensional, large-scale shaking table land development of core technology The contributors to this book are experts in their field whether they are from the nuclear, academic, governmental, or engineering consultant sectors. Their experienced and informed contributions will highlight and explore the most recent developments and challenges facing this highly relevant field of mechanical engineering.
Author: