Seismic Considerations for Steel Storage Racks Located in Areas Accessible to the Public PDF Download

Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Seismic Considerations for Steel Storage Racks Located in Areas Accessible to the Public PDF full book. Access full book title Seismic Considerations for Steel Storage Racks Located in Areas Accessible to the Public by Federal Emergency Agency. Download full books in PDF and EPUB format.

Seismic Considerations for Steel Storage Racks Located in Areas Accessible to the Public

Seismic Considerations for Steel Storage Racks Located in Areas Accessible to the Public PDF Author: Federal Emergency Agency
Publisher: FEMA
ISBN:
Category :
Languages : en
Pages : 169

Book Description
During the past few decades, the number of large public warehouse stores (often referred to as big-box stores) across the nation has grown significantly, changing both consumer buying habits and the public's risk of injury during earthquakes. During an earthquake, occupant safety in a big-box store depends on both the structural performance of the building and on the performance of the storage racks and their contents. Earthquake ground motions can cause storage racks to collapse or overturn if they are not properly designed, installed, maintained, and loaded. In addition, goods stored on the racks may spill or topple off. Both occurrences pose a life-safety risk to the exposed shopping public. The immediate stimulus for the project that resulted in this report was a 2003 request from the State of Washington to the Federal Emergency Management Agency (FEMA) for guidance concerning the life-safety risk posed by the storage racks in publicly accessible areas of retail stores, especially the risk of rack collapse of loss of stored goods during an earthquake. FEMA asked the Building Seismic Safety Council (BSSC) to develop the requested guidance. To do so, the BSSC established a Rack Project Task Group composed of practicing engineers, storage rack designers, researchers, representatives of the Rack Manufacturers Institute (RMI) and the Retail Industry Leaders Association, and members of applicable technical subcommittees responsible for updating the NEHRP Recommended Provisions. In developing this guidance document, the Task Group focused primarily on steel single selective pallet storage racks. It reviewed available information on storage rack performance during earthquakes and the background on the development of standards and code requirements for storage racks; assessed seismic requirements for storage racks and current practices with respect to rack design, maintenance and operations, quality assurance, and post-earthquake inspections; and examined available research and testing data. Based on its study, the Task Group developed short-term recommendations to improve current practice and formulated long-term recommendations to serve as the basis for improved standards documents such as the NEHRP Recommended Provisions, ASCE 7, and the RMI-developed storage rack specification. Over the near term, the Task Group recommends that the 2003 NEHRP Recommended Provisions requirements for steel single selective pallet storage rack design be followed and that connections be checked in accordance with a procedure to be developed by RMI. The Task Group also recommends that additional guidance presented in this report be voluntarily adopted by store owners and operators. Further, given the fact that maintenance and use of storage racks is a key element to their acceptable performance during earthquakes, store owners and operators should adopt an appropriate quality assurance plan; as a minimum, the best self-imposed practices of store owners and operators should be maintained. The Task Group's primary long-term recommendation is that the RMI specification be brought into conformance with the 2003 NEHRP Recommended Provisions, which is the basis for seismic requirements found in current seismic design standards and model building codes. The Task Group also recommends that optional performance-based and limit state procedures and component cyclic testing procedures be incorporated into the RMI-developed specification. Compliance with these procedures will demonstrate that the storage racks have the capacity to resist maximum considered earthquake ground motions without collapse. It also is recommended that regulatory bodies periodically review the quality assurance programs of stores and implement any regulations needed to satisfy life-safety concerns that relate to the securing of rack contents and rack maintenance and use.

Seismic Considerations for Steel Storage Racks Located in Areas Accessible to the Public

Seismic Considerations for Steel Storage Racks Located in Areas Accessible to the Public PDF Author: Federal Emergency Agency
Publisher: FEMA
ISBN:
Category :
Languages : en
Pages : 169

Book Description
During the past few decades, the number of large public warehouse stores (often referred to as big-box stores) across the nation has grown significantly, changing both consumer buying habits and the public's risk of injury during earthquakes. During an earthquake, occupant safety in a big-box store depends on both the structural performance of the building and on the performance of the storage racks and their contents. Earthquake ground motions can cause storage racks to collapse or overturn if they are not properly designed, installed, maintained, and loaded. In addition, goods stored on the racks may spill or topple off. Both occurrences pose a life-safety risk to the exposed shopping public. The immediate stimulus for the project that resulted in this report was a 2003 request from the State of Washington to the Federal Emergency Management Agency (FEMA) for guidance concerning the life-safety risk posed by the storage racks in publicly accessible areas of retail stores, especially the risk of rack collapse of loss of stored goods during an earthquake. FEMA asked the Building Seismic Safety Council (BSSC) to develop the requested guidance. To do so, the BSSC established a Rack Project Task Group composed of practicing engineers, storage rack designers, researchers, representatives of the Rack Manufacturers Institute (RMI) and the Retail Industry Leaders Association, and members of applicable technical subcommittees responsible for updating the NEHRP Recommended Provisions. In developing this guidance document, the Task Group focused primarily on steel single selective pallet storage racks. It reviewed available information on storage rack performance during earthquakes and the background on the development of standards and code requirements for storage racks; assessed seismic requirements for storage racks and current practices with respect to rack design, maintenance and operations, quality assurance, and post-earthquake inspections; and examined available research and testing data. Based on its study, the Task Group developed short-term recommendations to improve current practice and formulated long-term recommendations to serve as the basis for improved standards documents such as the NEHRP Recommended Provisions, ASCE 7, and the RMI-developed storage rack specification. Over the near term, the Task Group recommends that the 2003 NEHRP Recommended Provisions requirements for steel single selective pallet storage rack design be followed and that connections be checked in accordance with a procedure to be developed by RMI. The Task Group also recommends that additional guidance presented in this report be voluntarily adopted by store owners and operators. Further, given the fact that maintenance and use of storage racks is a key element to their acceptable performance during earthquakes, store owners and operators should adopt an appropriate quality assurance plan; as a minimum, the best self-imposed practices of store owners and operators should be maintained. The Task Group's primary long-term recommendation is that the RMI specification be brought into conformance with the 2003 NEHRP Recommended Provisions, which is the basis for seismic requirements found in current seismic design standards and model building codes. The Task Group also recommends that optional performance-based and limit state procedures and component cyclic testing procedures be incorporated into the RMI-developed specification. Compliance with these procedures will demonstrate that the storage racks have the capacity to resist maximum considered earthquake ground motions without collapse. It also is recommended that regulatory bodies periodically review the quality assurance programs of stores and implement any regulations needed to satisfy life-safety concerns that relate to the securing of rack contents and rack maintenance and use.

Catalog of FEMA Earthquake Resources

Catalog of FEMA Earthquake Resources PDF Author: United States. Federal Emergency Management Agency
Publisher: FEMA
ISBN:
Category : Earthquake resistant design
Languages : en
Pages : 32

Book Description


Seismic Behavior of Steel Storage Pallet Racking Systems

Seismic Behavior of Steel Storage Pallet Racking Systems PDF Author: Carlo Andrea Castiglioni
Publisher: Springer
ISBN: 3319284665
Category : Technology & Engineering
Languages : en
Pages : 502

Book Description
This book presents the main outcomes of the first European research project on the seismic behavior of adjustable steel storage pallet racking systems. In particular, it describes a comprehensive and unique set of full-scale tests designed to assess such behavior. The tests performed include cyclic tests of full-scale rack components, namely beam-to-upright connections and column base connections; static and dynamic tests to assess the friction factor between pallets and rack beams; full-scale pushover and pseudodynamic tests of storage racks in down-aisle and cross-aisle directions; and full-scale dynamic tests on two-bay, three-level rack models. The implications of the findings of this extensive testing regime on the seismic behavior of racking systems are discussed in detail, highlighting e.g. the confirmation that under severe dynamic conditions “sliding” is the main factor influencing rack response. This work was conceived during the development of the SEISRACKS project. Its outcomes will contribute significantly to increasing our knowledge of the structural behavior of racks under earthquake conditions and should inform future rack design.

Proceedings of the Indian Structural Steel Conference 2020 (Vol. 1)

Proceedings of the Indian Structural Steel Conference 2020 (Vol. 1) PDF Author: Mahendrakumar Madhavan
Publisher: Springer Nature
ISBN: 9811993904
Category : Technology & Engineering
Languages : en
Pages : 780

Book Description
This book comprises the select peer-reviewed proceedings of the Indian Structural Steel Conference (ISSC 2020). The topics cover state-of-the-art and state-of-the-practice in structural engineering, and latest research in structural modeling and design. Novel analytical, computational and experimental techniques, proposal of new structural systems, innovative methods for maintenance, rehabilitation, and monitoring of existing structures, and investigation of the properties of engineering materials as related to structural behavior are presented in the book. This book will be very useful for structural engineers, researchers, and consultants interested in sustainable materials and steel construction.

FEMA Publications Catalog

FEMA Publications Catalog PDF Author: Federal Emergency Management Agency
Publisher: FEMA
ISBN:
Category : United States
Languages : en
Pages : 48

Book Description


NEHRP Recommenede Provisions: Design Examples

NEHRP Recommenede Provisions: Design Examples PDF Author:
Publisher: FEMA
ISBN:
Category :
Languages : en
Pages : 858

Book Description


Are We Prepared?

Are We Prepared? PDF Author: United States. Congress. House. Committee on Science, Space, and Technology (2011). Subcommittee on Technology and Innovation
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 88

Book Description


Proceedings of the 2022 Eurasian OpenSees Days

Proceedings of the 2022 Eurasian OpenSees Days PDF Author: Fabio Di Trapani
Publisher: Springer Nature
ISBN: 3031301250
Category : Science
Languages : en
Pages : 489

Book Description
This book highlights the latest advances, innovations, and applications in the field of structural and geotechnical engineering, as presented by leading international researchers and engineers at the 2nd Eurasian Conference on OpenSees—Open System for Earthquake Engineering Simulation (EOS), held in Turin, Italy, on July 7–8, 2022. The conference was meant to give an overview on the latest developments made with the OpenSees framework as well as to present research and practical outcomes in which OpenSees plays an important role. Conference topics cover cutting-edge applications of OpenSees in the field of structural and geotechnical engineering, the development of new elements and materials, and also the development of new pre- and post-processors. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.

Behaviour of Steel Structures in Seismic Areas

Behaviour of Steel Structures in Seismic Areas PDF Author: Federico Mazzolani
Publisher: CRC Press
ISBN: 1439859418
Category : Technology & Engineering
Languages : en
Pages : 1667

Book Description
Behaviour of Steel Structures in Seismic Areas comprises the latest progress in both theoretical and experimental research on the behaviour of steel structures in seismic areas. The book presents the most recent trends in the field of steel structures in seismic areas, with particular reference to the utilisation of multi-level performance bas

Earthquake Spectra

Earthquake Spectra PDF Author:
Publisher:
ISBN:
Category : Earthquake engineering
Languages : en
Pages : 512

Book Description