Author: Xinghui HuangPublisher: VDM Publishing
ISBN: 9783639015072
Category : Computers
Languages : en
Pages : 112
Book Description
Robust Control of Dual-Stage Servo Systems in Hard Disk Drives
Author: Xinghui HuangPublisher: VDM Publishing
ISBN: 9783639015072
Category : Computers
Languages : en
Pages : 112
Book Description
Hard Disk Drive Servo Systems
Author: Ben M. ChenPublisher: Springer Science & Business Media
ISBN: 1846283051
Category : Technology & Engineering
Languages : en
Pages : 320
Book Description
The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies , new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. Hard disk drive systems are ubiquitous in today’s computer systems and the technology is still evolving. There is a review of hard disk drive technology and construction in the early pages of this monograph that looks at the characteristics of the disks and there it can be read that: “bit density... continues to increase at an amazing rate”, “spindle speed... the move to faster and faster spindle speeds continue”, “form factors... the trend...is downward... to smaller and smaller drives”, “performance... factors are improving”, “redundant arrays of inexpensive disks... becoming increasingly common, and is now seen in consumer desktop machines”, “reliability... is improving slowly... it is very hard to improve the reliability of a product when it is changing rapidly” and finally “interfaces... continue to create new and improved standards... to match the increase in performance of the hard disks themselves”.
Dual-stage Servo Control and Active Vibration Compensation in Magnetic Hard Disk Drives
Author: Yunfeng LiRobust Servo Design for Dual-stage Disk Drives
Author: Daniel J. HernandezRobust Control Design with MATLAB®
Author: Da-Wei GuPublisher: Springer Science & Business Media
ISBN: 1846280915
Category : Technology & Engineering
Languages : en
Pages : 393
Book Description
Shows readers how to exploit the capabilities of the MATLAB® Robust Control and Control Systems Toolboxes to the fullest using practical robust control examples.
Control Design and Implementation of Hard Disk Drive Servos
Author: Jianbin NiePublisher:
ISBN:
Category :
Languages : en
Pages : 218
Book Description
In this dissertation, the design of servo control algorithms is investigated to produce high-density and cost-effective hard disk drives (HDDs). In order to sustain the continuing increase of HDD data storage density, dual-stage actuator servo systems using a secondary micro-actuator have been developed to improve the precision of read/write head positioning control by increasing their servo bandwidth. In this dissertation, the modeling and control design of dual-stage track-following servos are considered. Specifically, two track-following control algorithms for dual-stage HDDs are developed. The designed controllers were implemented and evaluated on a disk drive with a PZT-actuated suspension-based dual-stage servo system. Usually, the feedback position error signal (PES) in HDDs is sampled on some specified servo sectors with an equidistant sampling interval, which implies that HDD servo systems with a regular sampling rate can be modeled as linear time-invariant (LTI) systems. However, sampling intervals for HDD servo systems are not always equidistant and sometimes, an irregular sampling rate due to missing PES sampling data is unavoidable. With the natural periodicity of HDDs, which is related to the disk rotation, those HDD servo systems with missing PES samples can be modeled as linear periodically time-varying (LPTV) systems. For the control synthesis of HDD servos with irregular sampling rates, an explicit optimal H_infinity control synthesis algorithm for general LPTV systems is first obtained by solving discrete Riccati equations. Then, the optimal H_infinity track-following control for irregular-sampling-rate servos is synthesized. Simulation and experiment studies, which have been carried out on a set of actual single-stage hard disk drives, demonstrate that the proposed control synthesis technique is able to handle irregular sampling rates and can be used to conveniently design a track-following servo that achieves the robust performance of a desired error rejection function for disturbance attenuation. Moreover, experiment results show that compared to the currently-used methodology for irregular sampling rates, the proposed control algorithm has significantly improved the servo performance. In addition, the feedback signal in HDD servos is generated from the servo patterns that must be pre-recorded using servo track writing process before the HDD can be used. Thus, the quality of the servo track writing process is also crucial to the accuracy of positioning read/write head. Recently, self-servo track writing has been developed in order to improve the quality of the written servo patterns and reduce the cost of servo track writing process. This dissertation considers two novel controller synthesis methodologies employing a feedforward control structure for performing concentric self-servo track writing in hard disk drives. Simulation results confirm that the two proposed control synthesis methodologies prevent error propagation from the previously written tracks and significantly improve servo track writing performance.
Robust Tuning of Fixed Structure Controllers for Hard Disk Drives
Author: Bo ZhuTwo Degree of Freedom Control for Disk Drive Servo Systems
Author: Li IHard Disk Drive Servo Systems
Author: Ben M. ChenPublisher: Springer Science & Business Media
ISBN: 1447137124
Category : Technology & Engineering
Languages : en
Pages : 286
Book Description
The series Advances in Industrial Contral aims to report and encourage technology transfer in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies ... , new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. From time to time a particular practical control problem emerges as a challenge to the design capabilities of the control community. One example has been the activated sludge process in wastewater systems where the process is highly nonlinear and measurements are few. A second example is the hard disk drive servo system. These widely used systems are critical to the operation of modem computing devices. They are nonlinear and demand a high-precision control system for the operations of track seeking and track following. There are also alternative actuation systems available to achieve these objectives. In this Advances in Industrial Control monograph B.M. Chen, T.H. Lee and V.
Hard Disk Drive Servo Systems
Author: Ben M. ChenPublisher: Springer
ISBN: 9781846283055
Category : Technology & Engineering
Languages : en
Pages : 310
Book Description
The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies , new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. Hard disk drive systems are ubiquitous in today’s computer systems and the technology is still evolving. There is a review of hard disk drive technology and construction in the early pages of this monograph that looks at the characteristics of the disks and there it can be read that: “bit density... continues to increase at an amazing rate”, “spindle speed... the move to faster and faster spindle speeds continue”, “form factors... the trend...is downward... to smaller and smaller drives”, “performance... factors are improving”, “redundant arrays of inexpensive disks... becoming increasingly common, and is now seen in consumer desktop machines”, “reliability... is improving slowly... it is very hard to improve the reliability of a product when it is changing rapidly” and finally “interfaces... continue to create new and improved standards... to match the increase in performance of the hard disks themselves”.