Refractory Metal Alloys Metallurgy and Technology PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Refractory Metal Alloys Metallurgy and Technology PDF full book. Access full book title Refractory Metal Alloys Metallurgy and Technology by I. Machlin. Download full books in PDF and EPUB format.
Author: I. Machlin Publisher: Springer Science & Business Media ISBN: 1468491202 Category : Technology & Engineering Languages : en Pages : 493
Book Description
This publication documents Proceedings of the Symposium on Metal lurgy and Technology of Refractory Metal Alloys, held in Washington, D.C. at the Washington Hilton Hotel on April 25-26, 1968, under sponsorship of the Refractory Metals Committee, Institute of Metals Division, of the Metallurgical Society of AIME, and the National Aeronautics and Space Administration. The Symposium presented critical reviews of selected topics in refractory metal alloys, thereby contributing to an in-depth understanding of the state-of-the-art, and establishing a base line for further research, development, and application. This Symposium is fifth in a series of conferences on refractory metals, sponsored by the Metallurgical Society of AlME. Publications issuing from the conferences are valuable technical and historical source books, tracing the evolution of refractory metals from early laboratory alloying studies to their present status as useful engineering materials. Refractory metals are arbitrarily defined by melting point. A 0 melting temperature of over 3500 F was selected as the minimum for this Symposium, thus excluding chromium and vanadium, which logically could be treated with other refractory metals in Groups VA and VIA of the periodic table. The Refractory Metals Committee is planning reviews of chromium and vanadium in subsequent conferences.
Author: I. Machlin Publisher: Springer Science & Business Media ISBN: 1468491202 Category : Technology & Engineering Languages : en Pages : 493
Book Description
This publication documents Proceedings of the Symposium on Metal lurgy and Technology of Refractory Metal Alloys, held in Washington, D.C. at the Washington Hilton Hotel on April 25-26, 1968, under sponsorship of the Refractory Metals Committee, Institute of Metals Division, of the Metallurgical Society of AIME, and the National Aeronautics and Space Administration. The Symposium presented critical reviews of selected topics in refractory metal alloys, thereby contributing to an in-depth understanding of the state-of-the-art, and establishing a base line for further research, development, and application. This Symposium is fifth in a series of conferences on refractory metals, sponsored by the Metallurgical Society of AlME. Publications issuing from the conferences are valuable technical and historical source books, tracing the evolution of refractory metals from early laboratory alloying studies to their present status as useful engineering materials. Refractory metals are arbitrarily defined by melting point. A 0 melting temperature of over 3500 F was selected as the minimum for this Symposium, thus excluding chromium and vanadium, which logically could be treated with other refractory metals in Groups VA and VIA of the periodic table. The Refractory Metals Committee is planning reviews of chromium and vanadium in subsequent conferences.
Author: E. M. Savitskii Publisher: Springer Science & Business Media ISBN: 1468415727 Category : Technology & Engineering Languages : en Pages : 296
Book Description
The principal reasons which induced the authors to write this book and the features of the book are set forth in the preface to the Russian edition. That section of the science of metals which in Russian is called "metallovedenie" or the "physical chemistry of metals" is generally referred to in scientific and technical literature published in the English language by the term "physical metallurgy." These concepts are much broader than the term" metallography," used in the scientific and technical literature of various countries, and applied solely to research on the interrelationships of the structure and proper ties of metals and alloys. Each science must have its own subject and its own method of research. Certainly, all specialists will agree that metals and alloys, including their solid solutions, mechanical mix tures, and metallic compounds, form the subject of "physical metallurgy" or "physical chemis try of metals." The aim of this science. is to produce a theory and to elucidate the experimental relationships which ought finally to make it possible to calculate quantitatively alloys Of given properties for any working conditions and parameters.
Author: Robert Odette Publisher: Newnes ISBN: 012397349X Category : Technology & Engineering Languages : en Pages : 676
Book Description
High-performance alloys that can withstand operation in hazardous nuclear environments are critical to presentday in-service reactor support and maintenance and are foundational for reactor concepts of the future. With commercial nuclear energy vendors and operators facing the retirement of staff during the coming decades, much of the scholarly knowledge of nuclear materials pursuant to appropriate, impactful, and safe usage is at risk. Led by the multi-award winning editorial team of G. Robert Odette (UCSB) and Steven J. Zinkle (UTK/ORNL) and with contributions from leaders of each alloy discipline, Structural Alloys for Nuclear Energy Applications aids the next generation of researchers and industry staff developing and maintaining steels, nickel-base alloys, zirconium alloys, and other structural alloys in nuclear energy applications. This authoritative reference is a critical acquisition for institutions and individuals seeking state-of-the-art knowledge aided by the editors' unique personal insight from decades of frontline research, engineering and management. - Focuses on in-service irradiation, thermal, mechanical, and chemical performance capabilities. - Covers the use of steels and other structural alloys in current fission technology, leading edge Generation-IV fission reactors, and future fusion power reactors. - Provides a critical and comprehensive review of the state-of-the-art experimental knowledge base of reactor materials, for applications ranging from engineering safety and lifetime assessments to supporting the development of advanced computational models.
Author: N. Eswara Prasad Publisher: Springer ISBN: 9811021341 Category : Technology & Engineering Languages : en Pages : 594
Book Description
This book is a comprehensive compilation of chapters on materials (both established and evolving) and material technologies that are important for aerospace systems. It considers aerospace materials in three Parts. Part I covers Metallic Materials (Mg, Al, Al-Li, Ti, aero steels, Ni, intermetallics, bronzes and Nb alloys); Part II deals with Composites (GLARE, PMCs, CMCs and Carbon based CMCs); and Part III considers Special Materials. This compilation has ensured that no important aerospace material system is ignored. Emphasis is laid in each chapter on the underlying scientific principles as well as basic and fundamental mechanisms leading to processing, characterization, property evaluation and applications. This book will be useful to students, researchers and professionals working in the domain of aerospace materials.
Author: Pascal Yvon Publisher: Woodhead Publishing ISBN: 0081009127 Category : Technology & Engineering Languages : en Pages : 686
Book Description
Operating at a high level of fuel efficiency, safety, proliferation-resistance, sustainability and cost, generation IV nuclear reactors promise enhanced features to an energy resource which is already seen as an outstanding source of reliable base load power. The performance and reliability of materials when subjected to the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors are essential areas of study, as key considerations for the successful development of generation IV reactors are suitable structural materials for both in-core and out-of-core applications. Structural Materials for Generation IV Nuclear Reactors explores the current state-of-the art in these areas. Part One reviews the materials, requirements and challenges in generation IV systems. Part Two presents the core materials with chapters on irradiation resistant austenitic steels, ODS/FM steels and refractory metals amongst others. Part Three looks at out-of-core materials. Structural Materials for Generation IV Nuclear Reactors is an essential reference text for professional scientists, engineers and postgraduate researchers involved in the development of generation IV nuclear reactors. - Introduces the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors and implications for structural materials - Contains chapters on the key core and out-of-core materials, from steels to advanced micro-laminates - Written by an expert in that particular area
Author: G. S. Upadhyaya Publisher: Cambridge Int Science Publishing ISBN: 1898326401 Category : Iron Languages : en Pages : 174
Book Description
Annotation Contents1 INTRODUCTION; 2 METAL POWDER PRODUCTION; 3 METAL POWDER CHARACTERISTICS; 4 METAL POWDER TRE-AMENT; 5 METAL POWDER COMPACT-ION; 6 SINTERING; 7 HOT CONSOLIDATION; 8 SECONDARY TREATMENT; 9 POWDER INJECTION MOULDING; 10 QUALITY CONTROL OF POWDER METALLURGY MATERIALS.
Author: Abram Naumovich Zelikman Publisher: Nova Snova ISBN: 9781536136975 Category : Technology & Engineering Languages : en Pages : 0
Book Description
Rare metals play an important role in the development of major branches of industry, such as vacuum equipment, semiconductor electronics, nuclear power and rocket production, as well as in the production of special steels and hard, refractory and corrosion-resistant alloys.Rapid development and improvement in the production of rare metals took place in the ten years which have elapsed since the publication of the first edition of this book. These ten years have witnessed the beginning of large-scale production of titanium, zirconium, and germanium, and a significant increase in the production volume; new, improved methods for the separation and purification of metals and compounds (ion-exchange, extraction, crystallization methods) as well as arc and electron-beam melting processes for metals were developed. This made it necessary to rewrite most of this book.In view of the growing importance of the lanthanides and rhenium, chapters on these metals were also included. At the same time, we decided to dispense with the chapters on lead and antimony, since these are not usually listed as rare metals. In describing the metallurgy of each metal, much attention was paid to its physicochemical nature and to the practical operations involved in the main technological processes for the production of its chemical compounds and of the pure metal.This book is a textbook for students specializing in the metallurgy of the rare metals. It is assumed that the student is familiar with the physicochemical fundamentals .of metallurgy, ore dressing, metallurgical furnaces, and processes and apparatus used in extractive metallurgy. The description of standard equipment (leaching apparatus, thickeners, filters, comminution installations, etc.) has accordingly been omitted. The references are grouped together at the end of the book.
Author: Flake C. Campbell Publisher: ASM International ISBN: 1615030581 Category : Technology & Engineering Languages : en Pages : 671
Book Description
This practical reference provides thorough and systematic coverage on both basic metallurgy and the practical engineering aspects of metallic material selection and application.
Author: A.K. Suri Publisher: Routledge ISBN: 1351448978 Category : Science Languages : en Pages : 272
Book Description
The growth and development witnessed today in modern science, engineering, and technology owes a heavy debt to the rare, refractory, and reactive metals group, of which niobium is a member. Extractive Metallurgy of Niobium presents a vivid account of the metal through its comprehensive discussions of properties and applications, resources and resource processing, chemical processing and compound preparation, metal extraction, and refining and consolidation. Typical flow sheets adopted in some leading niobium-producing countries for the beneficiation of various niobium sources are presented, and various chemical processes for producing pure forms of niobium intermediates such as chloride, fluoride, and oxide are discussed. The book also explains how to liberate the metal from its intermediates and describes the physico-chemical principles involved. It is an excellent reference for chemical metallurgists, hydrometallurgists, extraction and process metallurgists, and minerals processors. It is also valuable to a wide variety of scientists, engineers, technologists, and students interested in the topic.
Author: I. Machlin
Author: I. Machlin
Author: E. M. Savitskii
Author: Robert Odette
Author: N. Eswara Prasad
Author: Pascal Yvon
Author: The Minerals, Metals & Materials Society
Author: G. S. Upadhyaya
Author: Abram Naumovich Zelikman
Author: Flake C. Campbell
Author: A.K. Suri