Author: M. L. Wilson
Publisher: ASTM International
ISBN: 0803105282
Category : Alloys
Languages : en
Pages : 58
Book Description
The analyst should familiarize himself with the metals and alloys he expects to encounter including normal processing methods involved in fabricating the finished products. He should become familiar with the flow diagrams and procedures for determining constituent alloys in the various metal families listed in this publication. Normal cleaning processes must be observed on metals at test areas to remove dirt, grease, oxides, or metallic coatings such as nickel, zinc, tin, aluminum, etc., prior to performing a test. Cleaning solvents, files, or abrasives can be used as applicable. After properly cleaning the test area, the analyst should follow detailed instructions for each test relative to chemicals used, number of drops, and time allowed for each reaction. Procedures for determining constituent alloys in various metal families can be used independently of the flow diagrams; however, some tests on the flow diagrams refer the analyst to tests listed in the metal family procedures. Qualitative analysis can be performed on unknown metals and alloys by following the procedures for determining alloys in a given alloy family.
Nondestructive Rapid Identification of Metals and Alloys by Spot Test
Author: M. L. Wilson
Publisher: ASTM International
ISBN: 0803105282
Category : Alloys
Languages : en
Pages : 58
Book Description
The analyst should familiarize himself with the metals and alloys he expects to encounter including normal processing methods involved in fabricating the finished products. He should become familiar with the flow diagrams and procedures for determining constituent alloys in the various metal families listed in this publication. Normal cleaning processes must be observed on metals at test areas to remove dirt, grease, oxides, or metallic coatings such as nickel, zinc, tin, aluminum, etc., prior to performing a test. Cleaning solvents, files, or abrasives can be used as applicable. After properly cleaning the test area, the analyst should follow detailed instructions for each test relative to chemicals used, number of drops, and time allowed for each reaction. Procedures for determining constituent alloys in various metal families can be used independently of the flow diagrams; however, some tests on the flow diagrams refer the analyst to tests listed in the metal family procedures. Qualitative analysis can be performed on unknown metals and alloys by following the procedures for determining alloys in a given alloy family.
Publisher: ASTM International
ISBN: 0803105282
Category : Alloys
Languages : en
Pages : 58
Book Description
The analyst should familiarize himself with the metals and alloys he expects to encounter including normal processing methods involved in fabricating the finished products. He should become familiar with the flow diagrams and procedures for determining constituent alloys in the various metal families listed in this publication. Normal cleaning processes must be observed on metals at test areas to remove dirt, grease, oxides, or metallic coatings such as nickel, zinc, tin, aluminum, etc., prior to performing a test. Cleaning solvents, files, or abrasives can be used as applicable. After properly cleaning the test area, the analyst should follow detailed instructions for each test relative to chemicals used, number of drops, and time allowed for each reaction. Procedures for determining constituent alloys in various metal families can be used independently of the flow diagrams; however, some tests on the flow diagrams refer the analyst to tests listed in the metal family procedures. Qualitative analysis can be performed on unknown metals and alloys by following the procedures for determining alloys in a given alloy family.
Rapid Identification, Spot Testing, of Some Metals and Alloys
Author: International Nickel Company
Publisher:
ISBN:
Category : Alloys
Languages : en
Pages : 56
Book Description
Publisher:
ISBN:
Category : Alloys
Languages : en
Pages : 56
Book Description
Rapid Identification (spot Testing) of Some Metals and Alloys
Rapid Identification (spot Testing) of Some Metals and Alloys
Author: International Nickel Company. Development and Research Division
Publisher:
ISBN:
Category :
Languages : en
Pages : 47
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 47
Book Description
Nondestructive Rapid Identification of Metals and Alloys by Spot Test
Nondestructive Testing Rapid Identification of Metals and Alloys by Spot Test
Nondestructive Rapid Identification of Metals and Alloys by Spot Test [by M. L. Wilson].
Author: American Society for Testing and Materials Staff
Publisher:
ISBN: 9780598228260
Category :
Languages : en
Pages : 60
Book Description
Publisher:
ISBN: 9780598228260
Category :
Languages : en
Pages : 60
Book Description
Rapid Spot Testing of Metals, Alloys and Coatings
Author: Andrew Holmes
Publisher: ASM International(OH)
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 234
Book Description
Publisher: ASM International(OH)
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 234
Book Description
Identification of Metals by Spot Tests
A Field Test Kit and Procedure for Use in the Rapid Identification of Some Nickel Alloys and Stainless Steels
Author: Henry B. Lea
Publisher:
ISBN:
Category : Electronography
Languages : en
Pages : 4
Book Description
The purpose of this paper is to describe a test kit for use in the field for the rapid identification or classification of certain nickel alloys and certain stainless steels. A procedure for identifying or classifying these metals is also given. The metals or groups of metals which may be separated and identified or classified by this procedure are: Nickel, Monel metal, Inconel, A.I.S.I. type 316 stainless steel (18- 8 Mo), Other chrome-nickel stainless steels as a class, Straight chromium stainless steels as a class, and Carbon and low-alloy steels as a class. Materials which are simply classified into one of the above groups must be further identified either by quantitative analysis or by further spot testing which will not be described in this paper. If must be known that the compositions of the specimens of material to be identified lie within the limits stated above. It is important that all tests be made on a clean surface of the metal and also that specimens of known composition be on hand for comparison. It cannot be too strongly stressed that in testing of this type all definitely known facts of an engineering and metallurgical nature which are pertinent to the problem on hand should be gathered and analyzed. Such a procedure will often pay good dividends in time and expense saved in testing. As an example of the usefulness of this type of information, it may be known that only a certain kind of chrome-nickel stainless steel had ever been used in the area in question. Thus, the classification of an unknown specimen as chrome-nickel stainless steel would serve as a satisfactory identification of that specimen.
Publisher:
ISBN:
Category : Electronography
Languages : en
Pages : 4
Book Description
The purpose of this paper is to describe a test kit for use in the field for the rapid identification or classification of certain nickel alloys and certain stainless steels. A procedure for identifying or classifying these metals is also given. The metals or groups of metals which may be separated and identified or classified by this procedure are: Nickel, Monel metal, Inconel, A.I.S.I. type 316 stainless steel (18- 8 Mo), Other chrome-nickel stainless steels as a class, Straight chromium stainless steels as a class, and Carbon and low-alloy steels as a class. Materials which are simply classified into one of the above groups must be further identified either by quantitative analysis or by further spot testing which will not be described in this paper. If must be known that the compositions of the specimens of material to be identified lie within the limits stated above. It is important that all tests be made on a clean surface of the metal and also that specimens of known composition be on hand for comparison. It cannot be too strongly stressed that in testing of this type all definitely known facts of an engineering and metallurgical nature which are pertinent to the problem on hand should be gathered and analyzed. Such a procedure will often pay good dividends in time and expense saved in testing. As an example of the usefulness of this type of information, it may be known that only a certain kind of chrome-nickel stainless steel had ever been used in the area in question. Thus, the classification of an unknown specimen as chrome-nickel stainless steel would serve as a satisfactory identification of that specimen.