Rapid and Agile Locomotion with Power-dense Millirobots PDF Download

Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Rapid and Agile Locomotion with Power-dense Millirobots PDF full book. Access full book title Rapid and Agile Locomotion with Power-dense Millirobots by Duncan Haldane. Download full books in PDF and EPUB format.

Rapid and Agile Locomotion with Power-dense Millirobots

Rapid and Agile Locomotion with Power-dense Millirobots PDF Author: Duncan Haldane
Publisher:
ISBN:
Category :
Languages : en
Pages : 93

Book Description
The development of legged robots can serve two purposes. The first is to enable more mobility for robotic platforms and allow them greater flexibility for moving through complex real-world environments. The second is that the legged robot is a scientific tool. It can be used to design new experiments that drive insights both for the development of new robotic platforms and the characteristic of animal locomotors from which they are inspired. This work presents a design methodology that targets the creation of extreme robotic locomotors. These are robots that outperform all others at a particular task. They are used to study locomotion at the edge of the current performance envelope for robotic systems. The design methodology focuses on maximizing the power-density of the platform. We apply it to create first a rapid running robot, the X2-VelociRoACH, and two versions of a jumping robot, Salto and Salto-1P. In all of these robots, we centralize the actuation such that one actuator provides all the power for the energetic locomotory tasks. A kinematic coupling is designed for each platform, such that the correct behavior (running or jumping) happens by default when the energetic actuator is driven open-loop. The design methodology successfully created two robots at the edge of their respective performance envelopes. The X2-VelociRoACH is a 54 gram experimental legged robot developed with this methodology that was developed to test hypotheses about running with unnaturally high stride frequencies. It is capable of running at stride frequencies up to 45 Hz, and velocities up to 4.9 m/s, making it the fastest legged robot relative to size. The top speed of the robot was limited by structural failure. High-frequency running experiments with the robot shows that the power required to cycle its running appendages increase cubically with the stride rate. Our findings show that although it is possible to further increase the maximum velocity of a legged robot with the simple strategy of increasing stride frequency, considerations must be made for the energetic demands of high stride rates. For the development of the jumping robot Salto, we first devise the vertical jumping agility metric to identify a model animal system for inspiration. We found the most agile animals outperform the most agile robots by a factor of two. The animal with the highest vertical jumping agility, the galago (Galago senegalensis), is known to use a power-modulating strategy to obtain higher peak power than that of muscle alone. Few previous robots have used series-elastic power modulation (achieved by combining series-elastic actuation with variable mechanical advantage), and because of motor power limits, the best current robot has a vertical jumping agility of only 55% of a galago. Through use of a specialized leg mechanism designed to enhance power modulation, we constructed a jumping robot that achieved 78% of the vertical jumping agility of a galago. The leg mechanism also has constraints which assure rotation-free jumping motion by default. Agile robots can explore venues of locomotion that were not previously attainable. We demonstrate this with a wall jump, where the robot leaps from the floor to a wall and then springs off the wall to reach a net height that is greater than that accessible by a single jump. Our results show that series-elastic power modulation is an actuation strategy that enables a clade of vertically agile robots. We extend the work with Salto to see how the locomotory capacity of an extreme robotic locomotor can be extended without compromising the power density of the platform. Salto-1P uses aerodynamic thrusters and an inertial tail to control its attitude in the air. A linearized Raibert step controller was sufficient to enable unconstrained in-place hopping and forwards-backwards locomotion with external position feedback. We present studies of extreme jumping locomotion in which the robot spends just 7.7% of its time on the ground, experiencing accelerations of 14 times earth gravity in its stance phase. An experimentally collected dataset of 772 observed jumps was used to establish the range of achievable horizontal and vertical impulses for Salto-1P.

Rapid and Agile Locomotion with Power-dense Millirobots

Rapid and Agile Locomotion with Power-dense Millirobots PDF Author: Duncan Haldane
Publisher:
ISBN:
Category :
Languages : en
Pages : 93

Book Description
The development of legged robots can serve two purposes. The first is to enable more mobility for robotic platforms and allow them greater flexibility for moving through complex real-world environments. The second is that the legged robot is a scientific tool. It can be used to design new experiments that drive insights both for the development of new robotic platforms and the characteristic of animal locomotors from which they are inspired. This work presents a design methodology that targets the creation of extreme robotic locomotors. These are robots that outperform all others at a particular task. They are used to study locomotion at the edge of the current performance envelope for robotic systems. The design methodology focuses on maximizing the power-density of the platform. We apply it to create first a rapid running robot, the X2-VelociRoACH, and two versions of a jumping robot, Salto and Salto-1P. In all of these robots, we centralize the actuation such that one actuator provides all the power for the energetic locomotory tasks. A kinematic coupling is designed for each platform, such that the correct behavior (running or jumping) happens by default when the energetic actuator is driven open-loop. The design methodology successfully created two robots at the edge of their respective performance envelopes. The X2-VelociRoACH is a 54 gram experimental legged robot developed with this methodology that was developed to test hypotheses about running with unnaturally high stride frequencies. It is capable of running at stride frequencies up to 45 Hz, and velocities up to 4.9 m/s, making it the fastest legged robot relative to size. The top speed of the robot was limited by structural failure. High-frequency running experiments with the robot shows that the power required to cycle its running appendages increase cubically with the stride rate. Our findings show that although it is possible to further increase the maximum velocity of a legged robot with the simple strategy of increasing stride frequency, considerations must be made for the energetic demands of high stride rates. For the development of the jumping robot Salto, we first devise the vertical jumping agility metric to identify a model animal system for inspiration. We found the most agile animals outperform the most agile robots by a factor of two. The animal with the highest vertical jumping agility, the galago (Galago senegalensis), is known to use a power-modulating strategy to obtain higher peak power than that of muscle alone. Few previous robots have used series-elastic power modulation (achieved by combining series-elastic actuation with variable mechanical advantage), and because of motor power limits, the best current robot has a vertical jumping agility of only 55% of a galago. Through use of a specialized leg mechanism designed to enhance power modulation, we constructed a jumping robot that achieved 78% of the vertical jumping agility of a galago. The leg mechanism also has constraints which assure rotation-free jumping motion by default. Agile robots can explore venues of locomotion that were not previously attainable. We demonstrate this with a wall jump, where the robot leaps from the floor to a wall and then springs off the wall to reach a net height that is greater than that accessible by a single jump. Our results show that series-elastic power modulation is an actuation strategy that enables a clade of vertically agile robots. We extend the work with Salto to see how the locomotory capacity of an extreme robotic locomotor can be extended without compromising the power density of the platform. Salto-1P uses aerodynamic thrusters and an inertial tail to control its attitude in the air. A linearized Raibert step controller was sufficient to enable unconstrained in-place hopping and forwards-backwards locomotion with external position feedback. We present studies of extreme jumping locomotion in which the robot spends just 7.7% of its time on the ground, experiencing accelerations of 14 times earth gravity in its stance phase. An experimentally collected dataset of 772 observed jumps was used to establish the range of achievable horizontal and vertical impulses for Salto-1P.

Adaptive Mobile Robotics

Adaptive Mobile Robotics PDF Author: Abul K. M. Azad
Publisher: World Scientific
ISBN: 9814415944
Category : Technology & Engineering
Languages : en
Pages : 904

Book Description
This book provides state-of-the-art scientific and engineering research findings and developments in the area of mobile robotics and associated support technologies. The book contains peer reviewed articles presented at the CLAWAR 2012 conference. Robots are no longer confined to industrial and manufacturing environments. A great deal of interest is invested in the use of robots outside the factory environment. The CLAWAR conference series, established as a high profile international event, acts as a platform for dissemination of research and development findings and supports such a trend to address the current interest in mobile robotics to meet the needs of mankind in various sectors of the society. These include personal care, public health, services in the domestic, public and industrial environments. The editors of the book have extensive research experience and publications in the area of robotics in general and in mobile robotics specifically, and their experience is reflected in editing the contents of the book.

Legged Robots that Balance

Legged Robots that Balance PDF Author: Marc H. Raibert
Publisher: MIT Press
ISBN: 9780262181174
Category : Computers
Languages : en
Pages : 254

Book Description
This book, by a leading authority on legged locomotion, presents exciting engineering and science, along with fascinating implications for theories of human motor control. It lays fundamental groundwork in legged locomotion, one of the least developed areas of robotics, addressing the possibility of building useful legged robots that run and balance. The book describes the study of physical machines that run and balance on just one leg, including analysis, computer simulation, and laboratory experiments. Contrary to expectations, it reveals that control of such machines is not particularly difficult. It describes how the principles of locomotion discovered with one leg can be extended to systems with several legs and reports preliminary experiments with a quadruped machine that runs using these principles. Raibert's work is unique in its emphasis on dynamics and active balance, aspects of the problem that have played a minor role in most previous work. His studies focus on the central issues of balance and dynamic control, while avoiding several problems that have dominated previous research on legged machines. Marc Raibert is Associate Professor of Computer Science and Robotics at Carnegie-Mellon University and on the editorial board of The MIT Press journal, Robotics Research. Legged Robots That Balanceis fifteenth in the Artificial Intelligence Series, edited by Patrick Winston and Michael Brady.

Mobile Microrobotics

Mobile Microrobotics PDF Author: Metin Sitti
Publisher: MIT Press
ISBN: 0262341018
Category : Technology & Engineering
Languages : en
Pages : 305

Book Description
The first textbook on micron-scale mobile robotics, introducing the fundamentals of design, analysis, fabrication, and control, and drawing on case studies of existing approaches. Progress in micro- and nano-scale science and technology has created a demand for new microsystems for high-impact applications in healthcare, biotechnology, manufacturing, and mobile sensor networks. The new robotics field of microrobotics has emerged to extend our interactions and explorations to sub-millimeter scales. This is the first textbook on micron-scale mobile robotics, introducing the fundamentals of design, analysis, fabrication, and control, and drawing on case studies of existing approaches. The book covers the scaling laws that can be used to determine the dominant forces and effects at the micron scale; models forces acting on microrobots, including surface forces, friction, and viscous drag; and describes such possible microfabrication techniques as photo-lithography, bulk micromachining, and deep reactive ion etching. It presents on-board and remote sensing methods, noting that remote sensors are currently more feasible; studies possible on-board microactuators; discusses self-propulsion methods that use self-generated local gradients and fields or biological cells in liquid environments; and describes remote microrobot actuation methods for use in limited spaces such as inside the human body. It covers possible on-board powering methods, indispensable in future medical and other applications; locomotion methods for robots on surfaces, in liquids, in air, and on fluid-air interfaces; and the challenges of microrobot localization and control, in particular multi-robot control methods for magnetic microrobots. Finally, the book addresses current and future applications, including noninvasive medical diagnosis and treatment, environmental remediation, and scientific tools.

Advances In Cooperative Robotics - Proceedings Of The 19th International Conference On Clawar 2016

Advances In Cooperative Robotics - Proceedings Of The 19th International Conference On Clawar 2016 PDF Author: Mohammad Osman Tokhi
Publisher: World Scientific
ISBN: 9813149140
Category : Technology & Engineering
Languages : en
Pages : 894

Book Description
This book provides state-of-the-art scientific and engineering research findings and developments in the area of mobile robotics and associated support technologies around the theme of cooperative robotics. The book contains peer reviewed articles presented at the CLAWAR 2016 conference. The book contains a strong stream of papers on multi-legged locomotion and cooperative robotics. There is also a strong collection of papers on human assistive devices, notably wearable exoskeletal and prosthetic devices, and personal care robots and mobility assistance devices designed to meet the growing challenges due to the global ageing society. Robot designs based on biological inspirations and ethical concerns and issues related to the design, development and deployment of robots are also strongly featured.

On Size and Life

On Size and Life PDF Author: Thomas A. McMahon
Publisher: Times Books
ISBN: 9780716750000
Category : Body size.
Languages : en
Pages : 255

Book Description
Considers the role of shape and size in natural selection, looks at growth, biological structure, and locomotion, and discusses the effect of scale on living organisms

Interactive Collaborative Robotics

Interactive Collaborative Robotics PDF Author: Andrey Ronzhin
Publisher: Springer
ISBN: 3030261182
Category : Computers
Languages : en
Pages : 352

Book Description
This book constitutes the refereed proceedings of the 4th International Conference on Interactive Collaborative Robotics, ICR 2019, held in Istanbul, Turkey, in August 2019. The 32 papers presented in this volume were carefully reviewed and selected from 46 submissions. They deal with challenges of human-robot interaction; robot control and behavior in social robotics and collaborative robotics; and applied robotic and cyber-physical systems.

Micro-Manufacturing Technologies and Their Applications

Micro-Manufacturing Technologies and Their Applications PDF Author: Irene Fassi
Publisher: Springer
ISBN: 331939651X
Category : Technology & Engineering
Languages : en
Pages : 301

Book Description
This book provides in-depth theoretical and practical information on recent advances in micro-manufacturing technologies and processes, covering such topics as micro-injection moulding, micro-cutting, micro-EDM, micro-assembly, micro-additive manufacturing, moulded interconnected devices, and microscale metrology. It is designed to provide complementary material for the related e-learning platform on micro-manufacturing developed within the framework of the Leonardo da Vinci project 2013-3748/542424: MIMAN-T: Micro-Manufacturing Training System for SMEs. The book is mainly addressed to technicians and prospective professionals in the sector and will serve as an easily usable tool to facilitate the translation of micro-manufacturing technologies into tangible industrial benefits. Numerous examples are included to assist readers in learning and implementing the described technologies. In addition, an individual chapter is devoted to technological foresight, addressing market analysis and business models for micro-manufacturers.

The DelFly

The DelFly PDF Author: G.C.H.E. de Croon
Publisher: Springer
ISBN: 9401792089
Category : Technology & Engineering
Languages : en
Pages : 221

Book Description
This book introduces the topics most relevant to autonomously flying flapping wing robots: flapping-wing design, aerodynamics, and artificial intelligence. Readers can explore these topics in the context of the "Delfly", a flapping wing robot designed at Delft University in The Netherlands. How are tiny fruit flies able to lift their weight, avoid obstacles and predators, and find food or shelter? The first step in emulating this is the creation of a micro flapping wing robot that flies by itself. The challenges are considerable: the design and aerodynamics of flapping wings are still active areas of scientific research, whilst artificial intelligence is subject to extreme limitations deriving from the few sensors and minimal processing onboard. This book conveys the essential insights that lie behind success such as the DelFly Micro and the DelFly Explorer. The DelFly Micro, with its 3.07 grams and 10 cm wing span, is still the smallest flapping wing MAV in the world carrying a camera, whilst the DelFly Explorer is the world's first flapping wing MAV that is able to fly completely autonomously in unknown environments. The DelFly project started in 2005 and ever since has served as inspiration, not only to many scientific flapping wing studies, but also the design of flapping wing toys. The combination of introductions to relevant fields, practical insights and scientific experiments from the DelFly project make this book a must-read for all flapping wing enthusiasts, be they students, researchers, or engineers.

Intelligent Robotics and Applications

Intelligent Robotics and Applications PDF Author: Xin-Jun Liu
Publisher:
ISBN: 9783030890964
Category :
Languages : en
Pages : 0

Book Description
The 4-volume set LNAI 13013 - 13016 constitutes the proceedings of the 14th International Conference on Intelligent Robotics and Applications, ICIRA 2021, which took place in Yantai, China, during October 22-25, 2021. The 299 papers included in these proceedings were carefully reviewed and selected from 386 submissions. They were organized in topical sections as follows: Robotics dexterous manipulation; sensors, actuators, and controllers for soft and hybrid robots; cable-driven parallel robot; human-centered wearable robotics; hybrid system modeling and human-machine interface; robot manipulation skills learning; micro_nano materials, devices, and systems for biomedical applications; actuating, sensing, control, and instrumentation for ultra-precision engineering; human-robot collaboration; robotic machining; medical robot; machine intelligence for human motion analytics; human-robot interaction for service robots; novel mechanisms, robots and applications; space robot and on-orbit service; neural learning enhanced motion planning and control for human robot interaction; medical engineering.