Radiation Effects on Reactor Pressure Vessel Supports PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Radiation Effects on Reactor Pressure Vessel Supports PDF full book. Access full book title Radiation Effects on Reactor Pressure Vessel Supports by . Download full books in PDF and EPUB format.
Author: Publisher: ISBN: Category : Languages : en Pages : 202
Book Description
The purpose of this report is to present the findings from the work done in accordance with the Task Action Plan developed to resolve the Nuclear Regulatory Commission (NRC) Generic Safety Issue No. 15, (GSI-15). GSI-15 was established to evaluate the potential for low-temperature, low-flux-level neutron irradiation to embrittle reactor pressure vessel (RPV) supports to the point of compromising plant safety. An evaluation of surveillance samples from the High Flux Isotope Reactor (HFIR) at the Oak Ridge National Laboratory (ORNL) had suggested that some materials used for RPV supports in pressurized-water reactors could exhibit higher than expected embrittlement rates. However, further tests designed to evaluate the applicability of the HFIR data to reactor RPV supports under operating conditions led to the conclusion that RPV supports could be evaluated using traditional method. It was found that the unique HFIR radiation environment allowed the gamma radiation to contribute significantly to the embrittlement. The shielding provided by the thick steel RPV shell ensures that degradation of RPV supports from gamma irradiation is improbable or minimal. The findings reported herein were used, in part, as the basis for technical resolution of the issue.
Author: Publisher: ISBN: Category : Languages : en Pages : 202
Book Description
The purpose of this report is to present the findings from the work done in accordance with the Task Action Plan developed to resolve the Nuclear Regulatory Commission (NRC) Generic Safety Issue No. 15, (GSI-15). GSI-15 was established to evaluate the potential for low-temperature, low-flux-level neutron irradiation to embrittle reactor pressure vessel (RPV) supports to the point of compromising plant safety. An evaluation of surveillance samples from the High Flux Isotope Reactor (HFIR) at the Oak Ridge National Laboratory (ORNL) had suggested that some materials used for RPV supports in pressurized-water reactors could exhibit higher than expected embrittlement rates. However, further tests designed to evaluate the applicability of the HFIR data to reactor RPV supports under operating conditions led to the conclusion that RPV supports could be evaluated using traditional method. It was found that the unique HFIR radiation environment allowed the gamma radiation to contribute significantly to the embrittlement. The shielding provided by the thick steel RPV shell ensures that degradation of RPV supports from gamma irradiation is improbable or minimal. The findings reported herein were used, in part, as the basis for technical resolution of the issue.
Author: Publisher: ISBN: 9789201017093 Category : Business & Economics Languages : en Pages : 0
Book Description
This publication is intended to assist nuclear utilities in optimizing the service life of nuclear power plants. It reviews the latest research on the effects of neutron irradiation on the steels and welds of reactor pressure vessels within light water cooled and moderated reactors.
Author: C. Z Serpan (Jr) Publisher: ISBN: Category : Languages : en Pages : 23
Book Description
The deleterious effect of high energy neutrons upon the mechanical properties of reactor pressure vessel steels has prompted the employment of material surveillance programs in many nuclear power plants. These programs provide for the exposure of test specimens representative of the reactor pressure vessel at in-reactor locations, wherein they will experience the same thermal and radiation damage history as the vessel itself. Evaluation of these specimens, which reveals the progressive changes in the mechanical properties of the vessel, provides a basis upon which operational procedures and maximum lifetime exposure may be formulated for the plant. A review and an analysis of several instances of shortcomings in surveillance programs are presented along with a set of recommendations for consideration in planning new surveillance programs. In utilizing these recommendations, pressure vessel surveillance programs can be made to provide valuable information for use in determining plant operations; at the same time results from these programs may add to the general knowledge of radiation effects in pressure vessel steels or other materials subject to radiation. Recognition of the value of surveillance programs and their conscientious application should further the public acceptance of nuclear reactors as safe alternative power systems.
Author: MA. Sokolov Publisher: ISBN: Category : Annealing Languages : en Pages : 20
Book Description
One of the options to mitigate the effects of irradiation on reactor pressure vessels (RPVs) is to thermally anneal them to restore the toughness properties that have been degraded by neutron irradiation. Even though a postirradiation anneal may be deemed successful, a critical aspect of continued RPV operation is the rate of embrittlement upon reirradiation. There are insufficient data available to allow for verification of available models of reirradiation embrittlement or for the development of a reliable predictive methodology. This is especially true in the case of fracture toughness data. Under the U.S.-Russia Joint Coordinating Committee for Civilian Nuclear Reactor Safety (JCCCNRS), Working Group 3 on Radiation Embrittlement, Structural Integrity, and Life Extension of Reactor Vessels and Supports agreed to conduct a comparative study of annealing and reirradiation effects on RPV steels. The Working Group agreed that each side would irradiate, anneal, reirradiate (if feasible), and test two materials of the other. Charpy V-notch (CVN) and tensile specimens were included. Oak Ridge National Laboratory (ORNL) conducted such a program (irradiation and annealing, including static fracture toughness) with two weld metals representative of VVER-440 and VVER-1000 RPVs, while the Russian Research Center-Kurchatov Institute (RRC-KI) conducted a program (irradiation, annealing, reirradiation, and reannealing) with Heavy-Section Steel Technology (HSST) Program Plate 02 and Heavy-Section Steel Irradiation (HSSI) Program Weld 73W. The results for each material from each laboratory are compared with those from the other laboratory. The ORNL experiments with the VVER welds included irradiation to about 1 x 1019 n/cm2 (>1 MeV), while the RRC-KI experiments with the U.S. materials included irradiations from about 2 to 18 x 1019 n/cm2 (>1 MeV). In both cases, irradiations were conducted at ~290 °C and annealing treatments were conducted at ~454 °C. The ORNL and RRC-KI experiments have shown generally good agreement for both the Russian and U.S. steels. While recoveries of the Charpy 41-J transition temperatures were substantial in all cases, significantly less recovery of the lateral expansion and shear fracture in some cases (no recovery in one case) deserves further attention. The RRC-KI results for the U.S. steels showed reirradiation embrittlement rates which are conservative relative to the lateral shift prediction based on Charpy impact energy.
Author: 
Author: R. E. Johnson
Author: 
Author: Lendell E. Steele
Author: L. E. Steele
Author: 
Author: K. Shure
Author: L.E. Steele
Author: C. Z Serpan (Jr)
Author: 
Author: MA. Sokolov